T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• How To Install Putco Red Blade LED Tailgate Light Bar On 2021 Chevy/GMC Without Splicing
  I do have an option for you but there are no custom plug-in harnesses for a 2021 GMC Sierra 1500 at this time. That said, you can still install the Putco Red Blade LED Tailgate Light Bar part # P92010-60 without splicing and retaining the trailer connector by using the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384.
  view full answer...
• Troubleshooting Horse Trailer Interior Lights Not Functioning Towed by Ram 3500
  Check the 12 volt accessory circuit fuse of the trailer wiring circuit you have on you Ram. The lights you have on your trailer that aren't working are powered by this circuit and often times it's a blown fuse that causes it to stop working since this circuit is active all the time which makes it easier to short out. Or you can check the pins of your 7-way for corrosion on this circuit and clean as needed as that's the other really common issue that causes problems on this circuit. I...
  view full answer...
• Adding a 7-Way Trailer Connector to a 2012 Dodge Ram 2500 Big Horn With Flatbed
  If your 2012 Dodge Ram 2500 came with a factory tow package that included a 7-Way at the back of the vehicle, you can use 5th wheel and gooseneck in-bed wiring harness, # 50-97-410. This harness plugs in line with the factory wiring harness under the truck and provides a 7-Way in the bed area. If the truck did not come with a factory tow package that included a trailer connector, you will have to hardwire one in starting with a 4-Way using # 119178KIT. A T-connector is not available. Once...
  view full answer...
• Recommendation on a Trailer Hitch for a 2016 Chevrolet Silverado Pickup
  For your 2016 Chevrolet Silverado 1500, I have few hitches for you to review that will fit your vehicle. I recommend the Curt Class IV Hitch, # C14006. The Curt hitch is a custom-fit hitch that will mount to the frame of you truck without any additional drilling to the truck's frame. The hitch has the 2 inch receiver opening which will allow you to choose from a larger variety of hitch accessories, like bike racks or cargo carriers. This hitch has a 1000 lbs tongue weight and 10000 lbs...
  view full answer...
• Trailer Hitch and Wiring for 2019 Jeep Grand Cherokee Altitude Towing a Boat Trailer
  The trailer hitch I highly recommend for your 2019 Jeep Grand Cherokee Altitude is the Draw-Tite # 75699 because it has a concealed crosstube so your Jeep maintains its clean look and is also strong, with a 5,000 lb towing capacity and 500 lb tongue weight capacity. Keep in mind you still want to verify what the towing capacity of your Jeep is in your owner's manual and abide by that. is a bolt-on installation that will not require drilling into your Grand Chrokee's frame to install. This...
  view full answer...
  
• Troubleshooting Running Lights and Left Brake Blinker Not Working on Trailer
  First thing you should do at this point is test the 7-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue. Since it's one side of the trailer not functioning...
  view full answer...
• Will TowReady 4-Pole Trailer Adapter for Trucks w/ Factory 7 Way, Part # 118384, Work on 2010 F-150
  The TowReady 4-Pole Trailer Adapter for Trucks w/ Factory 7 Way, Part # 118384, is an adapter that is designed to provide a 4-pole trailer connector on vehicles that have a factory 7-way. This Y-shape harness plugs into the existing 7-way and provides both a 7-way connector and a 4-way. This enables you to add the 4-way connector without losing the 7-way, giving your F-150 the ability to tow trailers with either type of connector. If your 2010 F-150 has the factory tow package (but no...
  view full answer...
  
• Adding 4-Way Flat to 2000 Chevy Silverado with Factory 7-Way
  Since your 2000 Chevy Silverado is equipped with the factory 7-Way connector all you will need to add a 4-Way is the Tekonsha T-One Wiring Harness # 118384. This will plug right in-line with the 7-Way (no splicing, cutting, etc) to provide you with a 4-Way flat that you can use for your new light bar. Because of how it installs it will also retain function of the existing 7-Way. I have attached an installation video that you can use for reference as well.
  view full answer...
• Parts Needed to 4-Way to 2019 Ram 5500 with Factory 7-Way
  To add a 4-way to your 2019 Ram 5500 you'd want to go with the part # 118384 which instead of plugging inline with the square connector would plug inline between the round connectors right behind the 7-way.
  view full answer...
• Where Is Fuse For 12v Power To 7-way Connector In 2020 Ram 1500?
  I check the owner's manual of your 2020 Ram 1500 and the fuse for the 12v power pin on your 2020 Ram 1500 is located in the fuse box underneath the instrument panel on the driver side, and the fuse is F01 which is a 30amp pink fuse. Check to make sure the fuse is not blown/missing, as this is more than likely causing the pin to not have power. I included a link to a helpful article on wiring for you to take a look at.
  view full answer...
• Does Third Brake Module PP20-702 Fit 2020 Ram 1500
  Yes the third brake light module part # PP20-702 that you referenced does fit your 2020 Ram 1500. You'd want to wire this to the trailer wiring at the rear of the truck.
  view full answer...
• Additional 4-Way for 2022 Ram 1500 for Powering LED Light Bar
  The easiest way to add a 4-way to the trailer wiring at the rear of your 2022 Ram 1500 that has both a 7-way and a 4-way would be the part # 118384 which will plug inline with the 7-way and give you an additional 4-way for the LED strip.
  view full answer...
• Will Curt Class III Trailer Hitch # 13245 Fit a 2009 Jeep Liberty with 2 Wheel Drive
  Any of the trailer hitches listed for the 2009 Jeep Liberty will fit any model, 2 wheel drive or 4 wheel drive. This includes the Curt Class III Trailer Hitch, # 13245, that you have referenced. I have included a link to the installation details for reference and a link to all of the available hitches for the 2009 Liberty. If you plan on doing some towing with the hitch, the recommended ball mount is # C45010 with pin and clip # PC3. You can use ball # 19260 (1-7/8 inch diameter), # 63845...
  view full answer...
• Hitch for 2007 Chevrolet Classic Silverado 3500
  For a 2007 Chevrolet Silverado CLASSIC, there is a "Select Vehicle Style" drop-down menu where you can select "3500 - Pickup" or "3500 Pickup w/ 10" DeepDrop bumper" If you have the DeepDrop bumper then you can use the B&W # BWHDRH25187 hitch with 2" receiver opening, and a tow rating of 16,000 pounds. If you need a wiring harness, and your truck has been pre-wired at the factory, you can use the Tekonsha # 118384 wiring adapter for 4-pole connector. If you have the standard bumper then...
  view full answer...
• Troubleshooting Trailer Lighting That Stops When Headlights of Vehicle are Turned on
  What you described is the classic insufficient ground scenario so finding a way to improve the grounds will fix the problem. Try improving the connection of the main ground wire of the trailer wiring harness. Make sure it is attached to a clean metal surface. Or you can run all of the trailer wires back to the main ground. This is actually the ideal solution. But you can also check the current grounds for the lights to make sure they are making a solid connection to a clean metal surface.
  view full answer...
• Recommended Trailer Hitch For A 2014 Chevrolet Tahoe
  When it comes to installing a trailer hitch on your 2014 Chevrolet Tahoe The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inches # C13161 is confirmed to fit all 2wd Tahoes. This trailer has a bolt-on installation with no welding required. It has a gloss black powder coat finish which is over a protective base coat which offers superior rust resistance. The trailer hitch has a maximum gross trailer weight up to 6,000 pounds and has a maximum tongue weight up to 600 pounds....
  view full answer...
• Trailer Hitch with Bolt-on Installation Confirmed to Fit the 2022 Jeep Grand Cherokee Limited
  Yes, we do have a hitch that fits your 2022 Jeep Grand Cherokee Limited and has a bolt-on installation. The Curt Trailer Hitch Receiver # C13065 is confirmed to fit all models except the SRT, EcoDiesel, and Trackhawk. This hitch has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you plan to do any towing, you can add the T-One Vehicle...
  view full answer...
• 4-Way Recommendation for a 2004 GMC Sierra with Factory 7-Way
  We have exactly what you would need. The Curt Harness part # 118384 will install in inline with your factory 7-way and provide you with a 4-way that you could use. I attached an install video for you to check out as well.
  view full answer...
• Troubleshooting Loss of Power on Jack and Interior Trailer Lights with 2017 Ram
  It sounds like there is likely an issue with the 12V power circuit on your Ram's 7-Way connector, whether your jack and interior lights are powered directly from the 7-Way or via a battery on the trailer that is using the truck's 7-Way 12V power to maintain its charge. What you will want to do first is test the 12V pin on the truck's 7-Way with a circuit tester like # 40376 to see if you are getting power there. The 12V pin should be located at the 1 o'clock position on the 7-Way. If...
  view full answer...
• Recommended Trailer Hitch For Ram 1500 With Factory Installed Crossmember
  The Draw Tite hitch part # 41948 is a confirmed fit for the 2017 Ram 1500. You will need to remove the factory hitch and install the Draw-Tite hitch. The maximum tongue weight is up to 1,500 lbs and the maximum gross trailer weight is up to 12,000 lbs. Another option is to use Draw-Tite Max-Frame Trailer Hitch Receiver # 75662. This receiver easily bolts on to your frame and does not require you to remove the factory crossmember. The maximum tongue weight is up to 600 lbs and the maximum...
  view full answer...
• Wire Color Functions Typical of 7-Way on Trailer Red, Black, Blue, and Green
  For 7-way wiring typically the red wire is for the left turn/stop signal, the black wire is the 12 volt power accessory circuit, the blue is for brake controller output, and the green is for running lights.
  view full answer...
  
• Can Rampage SuperBrite LED Tailgate Light Bar # RA960137 be Hardwired Into a 2015 Ram 1500
  The Rampage SuperBrite LED Tailgate Light Bar # RA960137 plugs into a 4-Way flat vehicle side connector. If your 2015 Ram 1500 does not have any kind of trailer connector you could either add one using # 119250KIT or you would have to cut off the 4-Way plug on the light bar and wire its wires directly to the taillight wiring on your truck. To hardwire it to your truck you will first need to test the taillight wiring behind the truck's taillights using the circuit tester included in the...
  view full answer...
• 4-Way Recommendation for a 2012 Nissan Titan with 7-Way
  The T-One Vehicle Wiring Harness # 118384 that you referenced would be the correct product for your 2012 Nissan Titan with a 7-way to also install a 4-way. It will plug inline with the 7-way harness you have on your vehicle.
  view full answer...
• Recommended Under Tailgate LED Light Bar and Wiring For a 2017 Ram 1500 Big Horn
  I recommend using the T-One Vehicle Wiring Harness # 118384 with the Rampage SuperBrite LED Tailgate Light Bar # RA960134. This will allow you to easily hide all the wiring as well as not lose your connector for towing. Since it simply connects in line of your current trailer connector there is no wire splicing required. With the factory 4-Way/7-Way connector on your 2017 Ram 1500 like the Hopkins # HM40975, you will not be able to fully open both the caps as they share the same hinge.
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?