Trailer Hitch with Bolt-on Installation Confirmed to Fit the 2022 Jeep Grand Cherokee Limited

Question

Question:

I have a 2022 Grand Cherokee Limited. Not a Grand Cherokee L there is a difference Do you have a bolt on trailer hitch for this vehicle?

asked by: Ricardo M

0

Expert Reply:

Yes, we do have a hitch that fits your 2022 Jeep Grand Cherokee Limited and has a bolt-on installation. The Curt Trailer Hitch Receiver # C13065 is confirmed to fit all models except the SRT, EcoDiesel, and Trackhawk. This hitch has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.

If you plan to do any towing, you can add the T-One Vehicle Wiring Harness # 118727 (without tow package) or the # 118384 (with tow package) and the etrailer Ball Mount Kit # 989900 to round out a tow package.

expert reply by: Scott S

0

Ricardo M.

6/3/2022

I have a 2022 Grand Cherokee Limited. Not a Grand Cherokee L there is a difference Do you have a bolt on trailer hitch for this vehicle?

Reply

Scott S.

6/8/2022

You are correct that there is a difference between the Limited and an "L". The Curt Trailer Hitch Receiver # C13065 will work with the 2022 Jeep Grand Cherokee if you have the WK model (old body style). If you have the Jeep Grand Cherokee WL (new body style) then you would need the Curt Trailer Hitch Receiver # C24BR.

Reply

Answer 1

As the maximum towing capacity for a 2021 Jeep Grand Cherokee L is 7,200 pounds and the maximum tongue weight capacity is 720 pounds (equipped with all-wheel drive and the 5.7L V8), either hitch will be limited by the capacity of your vehicle. With…

view full answer...

Answer 2

I would be happy to help you find a hitch receiver for your 2021 Jeep Grand Cherokee Limited. I recommend the Curt Trailer Hitch item #C97JR. This is our highest rated hitch for the 2021 Grand Cherokee Limited, with a maximum gross trailer weight of…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

We do carry trailer hitch receivers to fit your 2012 Jeep Grand Cherokee but none of them install so that the receiver tube fits through the bumper. The hitch I recommend because it's a Class III and is tucked under the rear bumper more is the…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Trailer Hitch with Bolt-on Installation Confirmed to Fit the 2022 Jeep Grand Cherokee Limited

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching