3" Tall x 30" long ramps let you lift your low-ground-clearance vehicle to get a floor jack underneath it. Eliminates the need to buy a low-profile jack. Ramp incline creates a 7.8 degree angle of approach. Fit tires up to 10" wide.
Features:
Specs:
Race Ramps Track-Jax Ramps provide 3" of lift for a low-profile vehicle to allow a standard floor jack underneath it. The ramps have a 7.8 degree angle of approach, which allows you to load a low-ground-clearance vehicle without worrying about scraping its front end. These ramps eliminate the need to purchase an expensive low-profile jack.
These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each ramp supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service. The ramps are lightweight, weighing no more than 5 pounds per ramp, so you can transport and store them with ease.
The ramps are covered with a textured coating and are flat on one side. This keeps them from skidding when you drive up on them. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we will be having a look at the race ramps trak jax ramps, part number-rr-tj. Do you have a vehicle with low ground clearance that you can't easily slide a floor jack into at the factor lift point, such as this Ford Focus right here The solution is simple. The race ramps trak jax here allow you to easily drive your vehicle up and lift the front end or the back end off the ground an additional 3 inches, so you can easily slide a floor jack in underneath to complete whatever repair is necessary. They have a very low approach angle year, so for super low ground clearance cars, you don't have to worry about scraping the front of your bumper or the rest of your undercarriage while you're driving up on to get your floor jack back in. They're very lightweight. They only weigh 3 1/2 pounds each, and they provide a sensible alternative to purchasing a low profile jack. These ramps support up to 1,500 pounds each, so as a pair, you can support 3,000 pounds of weight on them. That's enough to handle most vehicles since you're not lifting the entire vehicle up. For the overall dimensions, they're 30 inches long by 12 inches wide and 3 inches tall.
They will accommodate vehicles with tires up to 12 inches wide. Now these race ramps are sold as a pair, so you don't have to worry about buying 2. You'll have all you need to work on her vehicle at once. They have a very nice textured surface to give you the traction you need, so even if you have water on your tires or dirt, oil, or debris, you'll be able to drive up them smoothly. The high density foam is oil, chemical, and water resistant, so they'll provide you with many year of trouble free service.
They're also guaranteed not to scratch, mark, or damage your floors. Now that we've gone over some of the features of them, we'll show you how to use them. Just slide them up into position in front of your tire like so. Make sure they're straight, just like that. Put the other one in. Now that we have our pair in place, we can drive our vehicle up onto it and we'll be able to get our floor jack in.
Before I couldn't slide this floor jack in underneath the vehicle. Let's see if I can do it now. Perfect. As you can see, I am now back into the factory jack location for the vehicle so I jack it up off the ground. Even though we only went up 3 inches, for some vehicles like this Ford Focus here, that actually gives us enough room to perform basic service, like changing the oil. I can fit under here nicely, grab the oil filter, and touch the drain plug.
It would be real easy to do an oil change without having to jack the car up completely. It will be a nice safe way of doing it, and you don't have to worry about putting it on jack stands either. That completes our look at the race ramps trak jax ramps, part number rr-tj.
Average Customer Rating: 4.4 out of 5 stars (14 Customer Reviews)
3" Tall x 30" long ramps let you lift your low-ground-clearance vehicle to get a floor jack underneath it. Eliminates the need to buy a low-profile jack. Ramp incline creates a 7.8 degree angle of approach. Fit tires up to 10" wide.These ramps are kept outside and they are holding up great. In addition to major time savers, they offer great peace of mind for safety. I ordered quite a few Race Ramp products (low ramps, high ramps, wheel cribs, & chocks) and they keep my vehicles stable on the grass lawn. Can't recommend them enough.
I have a 2017 Volkswagen GTI with low profile tires and about a 3" concrete lip at the entrance to my garage. The tires would spin and chirp if I tried to enter slowly. And it didn't want to ram the lip. These ramps were the PERFECT solution. Now the car rolls in with ease. The are highly quality and easy to store. VERY happy with this purchase.
Excellent, light yet durable product. I use it for the rear of my low profile car to accommodate the jack. Makes placing my car on jack stands very easy! I recommend this product.
Fit/Form/Function good on these, but sides collapsed and split recently.
Was hoping they had a stronger lip on back so you don’t go over and wish they weighed a bit more so they didn’t slide too bad there no way to be interconnected to hold them inline with each other
Ramps are as advertised and are easy to use. I was somewhat disappointed that they were softer than I expected. Good for a car tire but not for what I needed. No fault of theirs.
Works just fine
Nice light weight small and work like a charm.
Perfect!
Just what I needed to jack up my Corvet te.
The stops aren’t big or strong enough roll over too easy
Ramps are easy to move around and work great. Thanks
Do you have a question about this Car Ramp?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.