Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4" Tall x 52" long ramps can be used to load your vehicle onto a trailer or lift it for service. They function as extenders for alignment and 4-post lift ramps, as 2-post lift ramps, or jack assist ramps. Fit tires up to 12" wide.
Features:
Specs:
Race Ramps Shop Ramps can be used for service applications and trailer loading. The ramps have a 7 degree angle of approach, which allows you to load a low-ground-clearance vehicle without worrying about scraping its front end. The 2 heavy-duty, foam ramps have a combined weight capacity of 5,000 lbs. A textured coating keeps the ramps from skidding when you drive up on them and protects them from water and automotive fluids.
The Shop Ramps have several service functions around the shop or garage. They can be used as alignment or 4-post lift ramp extenders by simply placing the existing ramps on the cutouts. This helps protect your vehicle's front end from scrapes and scratches. Additionally, they can be used as ramps to load a vehicle onto a 2-post lift. Finally, as jack-assist ramps, they provide 4" of lift to allow a standard floor jack underneath a low-profile vehicle.
Use the trailer loading function to safely load your low-ground-clearance vehicle onto a trailer. Simply place the trailer door on the cutouts and drive onto your trailer. These cutouts support your trailer door and increase the overall length of your trailer loading ramp. This decreases the angle of approach to 7 degrees, allowing you to load your vehicle without fear of scraping the front end.
These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each ramp supports 2,500 lbs - giving you a total weight capacity of 5,000 lbs for lifting a vehicle for service or display. When loading your car onto a trailer, the ramps can support a vehicle weighing up to 10,000 lbs because they are only supporting half of the vehicle at one time. The ramps are lightweight, weighing no more than 17 pounds per ramp, so you can transport and store them with ease.
The ramps are covered with a textured coating and are flat on one side. This keeps them from skidding when you drive up on them. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jake: Hey guys, Jake here with etrailer. Today we're going to be taking a look at the line of race ramps. These ramps are designed to get your car that might have a low clearance up into your trailer. These are going to be different from the other ramps that you might be using, whether it be steel rams or if you're using wooden blocks. These are going to make it easier, so that you don't have to lug those around, or modify the back of your trailer.One of the things I really like about these ramps is they're going to look really stylish, while being very practical. It's going to have a foam construction, so it's going to be very, very light and easy to maneuver in and out of your trailer.
And it's going to have a nice black finish to it that has a little bit of grip, so that your tires don't slip when you're pulling on in wet conditions.One really nice characteristic about these ramps, is that there's going to be different length and height ramps for many different applications. So depending on your application, you're going to need to take a few measurements to be able to figure out which size ramp will be best for you. The longer ramps are going to be for your lower cars, and then your shorter rams are going to be for those cars that just need a little bit of help to not make contact with your ramp. We do have many different sizes here at etrailer.Here's a good example of the problem we want to fix. Now you'll notice here our angle of approach without our ramps is too steep to be able to get our car in.
Without our ramps we would drag our front bumper on our trailer.To get our ramp in place, we want to set them close, and then lower our gate with the extra overhang ramp folded up, you want to set your ramp down inside this groove, and then push your ramp up to the edge of your gate, and then just fold down your last flat. Now we'll go ahead and get our car loaded up into our trailer.It's also going to help with when unloading your vehicle.When you're all finished using them, they're going to be really easy to store. With this nice convenient handle, you can hook it on to any hook that you might have in your trailer. If you want to put them upright, you have that option. We like to store our shear in line with our wheel wells because we're not using that space anyway.The integrated handles are going to be really nice, because these ramps are black, so in the summertime when the sun is hot, the ramps can tend to get a little hot to be able to hold.
So this gives you an option to be able to transport your ramps without burning your hands.The ramps are going to have a 3000 pound weight capacity when paired with two ramps, but you're going to be able to pull a vehicle that weighs 6,000 pounds into a trailer.Well guys, with that being said, that's going to do it for our look at the line of Race Ramp Loading Ramps.
Average Customer Rating: 4.6 out of 5 stars (11 Customer Reviews)
4" Tall x 52" long ramps can be used to load your vehicle onto a trailer or lift it for service. They function as extenders for alignment and 4-post lift ramps, as 2-post lift ramps, or jack assist ramps. Fit tires up to 12" wide.surprised how quick item was shipped and received, and price was equal to best on internet sales.
Excellent product, light and easy to use. This is my second set of Race Ramp and etrailer.com delivered everything fast and on time.
David
7/17/2023
Its light weight and easy to move. Love it!
They did not last. They started to fall appart a couple of months after owning them. They started to delaminate and down hill from there. Great if you're going to drive over them once or twice a year. not if you're going to use them often.
Katrina B.
2/3/2023
Well then dont use them as much. I do see that these have a 1 year limited warranty, lets see what we can do for you.
I’m able to get my trike up the ramp to toy hauler with out scraping my pipes
Thanks for the follow up.
My Race Ramos do exactly what I need them to do. I have a very Low Ginetta G 4 that used to drag as I loaded it up in my trailer. The new ramps solved that issue. They are light weight and quality made. I wa also impressed with the attention to service when I purchased them.
Thanks for a quality product.
Use these to extend the ramp on our 4 post lift for lowered cars. Light, Durable & work excellent.
Product was delivered quickly and is exactly as advertised. Light weight but holds up to the weight very well.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
2/11/2024
This was the answer to loading my trike in the toy hauler