Are Inserts Sold For TorkLift Frame Mounted Tie Downs on 2001 Ford F-350

Question

Question:

Hello, is it possible to purchase only the camper tie down inserts? Bought a truck with torklift tie downs already mounted to the frame. Would just need the inserts and turnbuckles for front and rear. Or are they only sold in complete pairs? Thanks

asked by: Tyler

0

Expert Reply:

Inserts are not sold individually so you'd need the whole tie-down kit. For your 2001 Ford F-350 the rear tie-down is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3001.

The front will depend on your bed length, and so long as you do not have running boards that go underneath the truck bed, the right fit is either:

- 6-3/4' Bed: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2007

- 8' Bed: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2011

For turnbuckles, you'll need a total of four of the TorkLift FastGun Turnbuckles for Frame-Mounted Camper Tie-Downs # TLS9522.

expert reply by: Kyle S

0

Answer 1

The Derringer set you referenced is only available in a set of 4 that has two longer and two shorter turnbuckles but we do have the Torklift Springload part #TLS9050A which is a set of two that has a range of 35 to 45 inches which is similar to the…

view full answer...

Answer 2

The reach for the set of the TorkLift AnchorGuard Derringer Turnbuckles #TLS9020 is 18-1/2" - 25-1/2" for the front set and 28-1/2" - 34-1/2" for the rear sets. For a set that can go up to 43 inches for…

view full answer...

Answer 3

The main difference between the Torklift Locking FastGun Turnbuckles, #TLS9522-2-LK, and the AnchorGuard Derringer Turnbuckles, #TLS9020, is how the camper tie-downs are mounted on your truck. The FastGun #TLS9522-2-LK are designed to be used with…

view full answer...

Answer 4

For your 2002 Ford F-250 I recommend checking out the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLF2007 for the front, and the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLF3001 for the rear. These tie-downs are American made, custom fit…

view full answer...

Answer 5

The Angled Hold-Downs for Truck Bed Campers #HSAB would work well on your 2003 Ford F-350 for securing your camper to the bed of the truck. The only Ford trucks that we have fit exclusions for with these are the 2004-2008 Ford F-150. You will also…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 11

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Are Inserts Sold For TorkLift Frame Mounted Tie Downs on 2001 Ford F-350

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching