Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(310 reviews)
Price: $117.32
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Retail:$171.41
Our Price: $117.32
You Save: $54.09
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (310)
- Q & A (0)
- Photos
- Used (1)
Brophy Truck Camper Tie Downs - TDSF
- Front and Rear Tie-Downs
- Bed-Mounted
- Powder Coated Steel
- Brophy
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (310 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
Jenny N.
3/12/2024
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.
by: Randy05/25/2023
Did not realize they are for a 8’ maximum camper. Mine is 9’6”
Randy E.
5/27/2024
They did not fit my 2021 Ram Stake pockets . Hope to get rid of them sometime in the future
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Drew
9/5/2023
Excellent no issues
by: Matthew 05/09/2024
Fast perfect fit
MADE IN USA
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Jenny N.
3/31/2022
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Richard09/25/2023
It bent under load
Jenny N.
9/27/2023
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Jim K.
10/17/2017
Im still very pleased with the product
by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Dennis B.
3/30/2019
Great, finish is durable. Still function properly, did not cause wear on the truck
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Jenny N.
11/25/2022
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Db
3/20/2015
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: Howard 08/12/2022
WOW - MUCH better than attaching my big cab-over camper to the bumper with chains in the back and a welded piece of 2X2 square tubing attached to the frame in the front.
Very easy to install - just had to go get a couple drill bits - no big deal. These tie-downs will be much stronger than any S-hooks or turn-buckles could possibly bend.
I did use threaded connecting links rather than S-hooks - I think they will hold better.
25
310
Show More Reviews
See what our Experts say about this Brophy Truck Camper Tie Downs
- Brophy Camper Tie Downs that Fit 1988 Ford RangerThe Brophy Camper Tie Downs part # TDSF that you referenced are a fit for your 1988 Ford Ranger and will work well. We had a customer with a similar Ranger use these and they told us they worked great afterwards. The hardware kit you'd also need to attach these to your camper is the # TDHP.
view full answer... - Camper Tie-Downs for a 2013 Ford F-150I personally like the TorkLift Custom Frame-Mounted tie-downs like parts # TLF2014, and # TLF3005 which fit a 2013 Ford F-150 with the 6-1/2' bed and no board or step under the bed. There are variations of this type of kit depending on the configuration for your pickup and they provide you a clean look when you don't have your camper in the bed. For a more cost-effective option you can use a Brophy stake pocket mount like part # TDSF but you need to make sure that the 5-1/2" high x 1-7/8"...
view full answer... - Truck Bed Camper Tie Down Recommendation for 2017 Dodge Ram 2500The stake pocket Brophy camper tie downs part # TDSF that you mentioned only fit trucks up 2010 according to Brophy so you'd need to go a different route for your 2017 Ram 2500. You may be able to use Brophy Clamp On Camper Tie-Downs # HSAB though. They will fit if the external bed rail width is less than 5-1/2 inches and they require 2 inches of space beneath the lip of the bed rail. Use these with turnbuckle kit # TDHP.
view full answer...
- Truck Bed Camper Tie-Downs for 2007 2500Chev Crew Classic According to my contact at CR Brophy, the # TDSF stake pocket camper tie down isn't compatible with your truck. The # HSSF clamp style tie down will work as long as your truck bed has two inches of available space under the truck bed sidewall as shown in the provided diagram. You'd also need the hardware package, part # TDHP which includes the chains, turnbuckles and hooks to connect the tie-downs and the camper.
view full answer...
- Hardware Included With The Brophy Stake Pocket Mounted Camper Tie Downs # TDSFThe Brophy Stake Pocket Mounted Camper Tie Downs # TDSF includes the following hardware: 8- 5/16 x 1 1/4 sheet metal screw 4- 5/16 flat washer 4- 5/16 hex nut 4- 5/16 x 1 hex head bolt To complete your setup you'll also need some turnbuckles, like the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP.
view full answer... - Available Frame-Mounted Truck Camper Tie Down Kits for 2015 Ram 1500We do have truck bed camper tie downs for the 2015 Ram 1500 that appear on the linked page, but these are all the frame-mount type and their fit is very specific to the truck's total configuration. These TorkLift tie down sets, such as # TLD2134 and # TLD3107 which fits the 5-1/2 foot bed without board or step underneath truck bed and with a factory installed hitch, are custom designed for your truck and allow for a more stable camper installation without loss of ground clearance. These...
view full answer... - Camper Tie Downs for a 2005 Dodge Ram DuallyThe Brophy camper tie downs, # HSSF, fit most domestic full size trucks, but there is not a specific vehicle list that they will fit. You will have to go by the measurements of the tie downs and the installation instructions to determine if they will fit your 2005 Dodge Ram Dually. I have included some pictures that should help. We also have some stake pocket mount tie downs that could fit, # TDSF. With either tie down kit, you can use the Camper Tie Down Hardware Package, # TDHP.
view full answer...
- Camper Tie Downs for a 2018 Ram 2500We have Brophy Stake Pocket Mounted Camper Tie Downs # TDSF but they are only for certain trucks up to the 2010 model year. You may be able to use Brophy Clamp On Camper Tie-Downs # HSAB though. They will fit if the external bed rail width is less than 5-1/2 inches and they require 2 inches of space beneath the lip of the bed rail. Use these with turnbuckle kit # TDHP. The other option is custom frame mounted tie downs. Which ones will fit depends on the configuration of the truck. I have...
view full answer... - Camper Tie Downs for a 2006 Ford F-150 SupercrewThe measurements and requirements of the hold downs and the bed sides on a 2006 Ford F-150 are not compatible so you that is why you cannot use # HSSF. You may be able to use stake pocket mount tie downs # TDSF. Take a look at the instructions I have linked and compare them to your truck to ensure fit. With this tie down kit you can also use tie down hardware # TDHP.
view full answer... - Quantity Of the Brophy Camper Hold Downs Come with the # TDSF # HSSF and # HSABAll of the Brophy Truck Bed Camper Hold Downs like the # TDSF, HSSF, and the HSAB are sold in a quantity of 4.
view full answer... - Brophy Camper Tie Downs for 2015 Chevy Silverado 3500 Single Rear WheelI do have a solution for you, but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not designed to fit on 2011 and newer pickups, so they will not work for your 2015 Chevy 3500. The Brophy Clamp On Camper Tie-Downs # HSSF would be the correct camper tie downs for your 2015 Chevy Silverado 3500. These will work on the newer (non-dually) Silverados, as confirmed by Brophy. The # HSSF will need to be used in conjunction with a tie-down hardware package consisting of turnbuckles,...
view full answer...
- Will Stake Pocket Mount Camper Tie Downs Fit a 1989 Ford F-150Since you have a full size Ford truck you can use the camper tie downs # TDSF. I have linked the instructions for you. I also recommend using the camper tie down hardware package # TDHP.
view full answer... - Camper Tie-Downs for 2013 Ford F150According to CR Brophy, the TDSF is not a fit for your F150. They recommend using the # HSSF, which will work with your truck as long as there is two inches of clearance under the lip of the bedside, as shown in the provided diagram. Full dimensions of the TDSF are available in the thumbnail photos shown on the product page.
view full answer...
- Camper Tied Down Set Up For A 2008 Ford F-450 Super DutyThe Brophy Stake Pocket Tie Downs Item # TDSF and the HappiJac Qwik-Load Upgrade Kit for Standard Turnbuckles - Qty 4 Item # LC182894 are both compatible with the 2008 Ford F-450 Super Duty. Keep in mind the stake pocket tied down do require drilling to get them installed. You will also need the HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 Item # LC182898 to work with the Quick-Load Turnbuckles.
view full answer... - Camper Tie-Downs For 2013 GMC Sierra 1500 The BROPHY Camper Tie Down, part # TDSF you referenced is not designed as a fit for your 2013 GMC Sierra but we do have another solution. I recommend part # HSSF. if you have access to the underside of your bed rails. These tie-downs use a clamp-on mounting system that grabs the underside of your bed rails. I have attached a photo that shows how this system is mounted on a truck. I have attached a link to an installation video for these tie-downs you can check out. If you decide on the...
view full answer...
- Truck Bed Camper Tie Down Recommendations for a 2013 Ford F-150The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2013 Ford F-150. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Fit of CR Brophy # HSSF Truck Bed Camper Tie Downs on 2007 Toyota TundraCR Brophy, the manufacturer of the # HSSF tie downs did not test fit on the 2007 Toyota Tundra, so they can neither confirm or deny the fit. I was told that if the bed is single walled and the lip under the bed side is at least 2 inches wide, the tie town should fit (see photo). Torklift offers tie-downs that are a confirmed fit, you can see the different fits available by clicking the provided link.
view full answer...
- Will Stake Pocket Mount Camper Tie Downs, # TDSF Fit a 2011 Ford F-250The Stake Pocket Mount Camper Tie Downs, # TDSF, are a universal fit item intended to fit as many trucks as possible. But there is no fit guide available stating which trucks are compatible. It is still very likely that they will fit your 2011 Ford F-250. You may also be interested in the Camper Tie Down Hardware Package, # TDHP to connect the camper to the tie downs.
view full answer... - Recommended Brophy Camper Tie-Downs for 2005 Toyota Tundra For your 2005 Toyota Tundra I recommend the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF. These particular tie-downs will mount right to the truck's stake pockets instead of having to clamp them around the bed rails like the other options for a bit of an easier installation and a more secure attachment. Just note that some drilling will be required. We had a customer use these with his 2005 Toyota Tundra and reported that they worked perfectly so we know that they fit the stake...
view full answer... - Camper Tie Downs for a 1991 GMC C/K Series 3500 DuallyBrophy Clamp On Camper Tie-Downs # HSSF will likely NOT fit your 1991 GMC C/K 3500 dually. Dually beds can have a double-wall design or other alternative design compared to non-dually models that would make them incompatible. The stake pocket mounts, # TDSF, have the same limitations. The only products that I can guarantee will work are custom fit camper tie downs. I have included a link to them for you. Use the drop down menu in that link to select the configuration of your truck to see...
view full answer... - Tie-Downs for a 2018 Ford F-350 Super Duty with Front Auto-Fold StepsIt is true that the TorkLift tie-downs are not compatible with the auto-fold steps on your 2018 Ford F-350 Super Duty but we do have another solution. Brophy has a few different stake pocket mounted tie downs that could fit. These are universal and haven't been tested for specific vehicles, but we do have the dimensions so it wouldn't be difficult to see if any of them would work for your application. Parts # HSSF and # HSAB measure 11-5/16" tall x 3" wide x 3/8" thick, while part # TDSF...
view full answer...
- Recommended Camper Tie Downs for a 2005 Ford F-250 4x4 Regular Cab 8 Foot Bed DieselNo, the stake pocket mount tie downs, # TDSF, are only good for campers up to 8 feet long. You would need camper tie downs # HSSF instead for your 2005 Ford F-250. I have included a link to a video review and the instructions to the right. I also recommend camper tie down hardware package # TDHP. You may also be able to install frame mount tie downs which would be ideal. I have included a link to the custom fit frame mount tie downs for the 2005 Ford F-250. You will need to use the drop...
view full answer... - Camper Tie Downs Fits for 2008 Ford F-150 5.5-ft Short BedThe camper tie down kits confirmed to fit your 2008 Ford F-150 short bed can be seen on the linked page by selecting your specific configuration from the drop-down menu tool at the top of the page. The Brophy stake pocket tie downs # TDSF work only with full-size trucks.
view full answer... - Camper Tie Downs that Attach to Stake PocketsI have a much better solution for you than the part # EM09085 as a camper tie down. The Brophy Camper Tie Downs, part # TDSF, you have referenced are a universal application. The hardware to mount the tie downs to the vehicle are included. These tie downs will fit campers up to 8 feet in length. If you have a larger camper I would recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down. The tie downs wrap around the bed, not in the stake pockets, and...
view full answer...
Do you have a question about this Truck Camper Tie Down?
Used Items Available
Condition: Surface Scratches
Notes: Item has cosmetic surface scratches.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Nate
6/4/2024
product is still working fine a year and 2 trips to Canada later. I used the stake pocket hold downs because my truck bed was rusted out where the clamp on hold downs would normally go. it works just fine.