Cable Lock and Hitch Lock for Kuat Transfer 1 Bike Rack
(18 reviews)
Price: $39.00
In Stock
Cable Lock and Hitch Lock for Kuat Transfer 1 Bike Rack
Item # ATSCLK11011
Retail:$50.93
Our Price: $39.00
You Save: 23%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (18)
- Q & A (0)
- Videos (1)
- Photos
Kuat Bike Locks - ATSCLK11011
- Cable Locks
- 2 Feet Long
- Keyed Unique
- Kuat
- Black
- Steel
Kit includes a cable lock and a hitch lock for your Kuat Transfer 1-bike platform rack. Cable locks secure bikes to rack. Hitch lock attaches to existing hitch pin to secure rack to vehicle. Not compatible with Transfer V2.
Features:
- Lock upgrade kit provides keyed-alike cable lock and hitch lock for your Kuat Transfer 1-bike platform-style rack (sold separately)
- Works with original Transfer manfuctured before 2021 - not compatible with Transfer V2
- Braided-steel cable lock secures your bike to the rack
- Cable installs in the rack's ratcheting arm with included tool and hardware
- Magnetic tip at end of cable keeps it in place inside arm
- Vinyl coating protects your bike from scratches and abrasions
- Hitch lock attaches to existing hitch pin to secure rack to vehicle
- Steel construction is durable and corrosion resistant
- 3 Keys included
Specs:
- Cable dimensions: 27-1/2" long x 3/8" diameter
- Hitch lock dimensions: 2-1/4" long x 1" diameter
- Limited lifetime warranty
ATSCLK11011 Cable Lock and Hitch Lock for Original Kuat Transfer Platform 1-Bike Rack for 1-1/4 Inch and 2 Inch Hitch Receivers - Tilting - Folding
Video of Cable Lock and Hitch Lock for Kuat Transfer 1 Bike Rack
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Kuat Bike Locks - Cable Lock - ATSCLK11011
Today we're going to take a quick look at Kuat Cable Lock and Hitch Lock for the Kuat Transfer.Now, this is going to upgrade your transfer so that you can actually lock your bikes in place. It's going to just be a single lock for one bike. This is going to attach to the end of the upright arm that comes off of your transfer. It just attaches into the end of that arm. There's a little hole that goes through the locking mechanism here, and that's what's actually going to attach to that end piece. The rest of the cable is going to go down inside that arm, with the little stopper there to keep it from coming all the way out.
So, whenever you have this in place, this black end is actually going to be attached to the transfer. The cable comes out and then it's going to stop at that black portion there, as you can see.But then we can bring our cable around our handlebars or frame or another secure location on our bike, wrap it around, and then flip this silver piece around so that we can attach this silver end into that. And that's what's going to lock in place. The tumbler's going to be on the other end of that silver piece, so we'll actually use our keys. It does come with three keys, so our locks are going to be keyed alike between our hitch lock and the bike rack lock itself.
So, pretty easy system to use.This cable is going to be 27-1/2" long, and it has a 3/8" diameter, so it should be plenty long to get it around a secure location. It doesn't have to go all the way around the bike, just as long as it's attached to a point that nobody can take it off. So, it's probably best to stay away from the front or rear wheels, since those can typically be removed pretty easily, especially that front wheel.The cable is going to have a nice vinyl coating, so we don't have to worry about that scratching our bike, don't have to worry about abrasions there. On the inside of that, it's got a braided steel cable, so that's going to deter most people from taking it away. The tip of the end of our cable is going to be magnetic, so it helps it to stay in place at the end.
So it's just going to be a little bit of tension there to keep it from just flopping out whenever you don't need it.Then this cylinder is going to be the hitch lock. This goes onto the end of your hitch pin, locks that into place with this dust cover over the cylinder there. Again, this is going to have the same key as our cable lock. That makes it easy. We only have one key to worry about.
You can have one of these on your key chain, maybe one in your glove compartment, and then one at home as a spare.It also comes with some hardware to get everything attached. You'll have a security bolt that's going to go through our . the end of our cable lock, and it comes with the tool to tighten that down, and a locking nut to go to the other side. The nice thing about this is that it's a star bit, with the little dot in the center, so it's not a very common tool. So, most likely nobody's going to be able to just back out that bolt and nut and take your lock off. So they've got it through with a little extra added security there.That's going to do it for our look at the Kuat Transfer Cable Lock and Hitch Lock Pin.
Customer Reviews
Cable Lock and Hitch Lock for Kuat Transfer 1 Bike Rack - ATSCLK11011
Average Customer Rating: 4.7 out of 5 stars (18 Customer Reviews)
Kit includes a cable lock and a hitch lock for your Kuat Transfer 1-bike platform rack. Cable locks secure bikes to rack. Hitch lock attaches to existing hitch pin to secure rack to vehicle. Not compatible with Transfer V2.by: Dennis05/10/2020
This Kuat Transfer 1, fits the ticket. And yes, it is expandable to two bikes! After having an old cheap bike rack that shook, rattled, and rolled into the trash can; this rack is stable and reasonably priced. Also, being able to tilt the rack at a 45* degree angle to lift the hatch on my Ford Escape was an added bonus. I'm a happy biker now! P.S. The installation instructions made it a breeze to assemble and the lifetime warranty speaks for itself. ***Thank you Jenny B at etrailer for the excellent recommendation!
by: Ian07/14/2020
The Kuat Transfer 1 was easy to assemble and fits great on the hitch of my Subaru Outback. Build quality is excellent, suitable for both my mountain and road bike. Looking forward to trying this out on the road but first impressions are positive.
by: Susanne01/30/2020
I purchased for use with the single platform wish it was a wee bit longer & its hard for use shorter people 5'3 to look into the cylinder to see which way its going to get it to lock
by: Andrew 08/24/2020
Not sure of value, as I did not shop around for this, but very convenient to purchase both locks at the same time. The cable lock is very much a secondary layer of protection and should not be used alone to secure a bike! However for the slightly paranoid it brings some additional comfort. The design is certainly flimsy; its only secured to the ratcheting arm by one chinesium torx cap head bolt. But as a detriment to the passerby/opportunist bike thief this might be more than enough. Combined with the lock for the hitch pin I feel a lil better about leaving my mtb on the car rack unsupervised in public. The build quality seems OK enough for both. The hitch pin lock has a nice tight fitting cap to keep the road grime out, which is a nice feature. I wish the cable was longer, However I can thread it through my fork stanchions or through the frame or the front wheel but only through one at a time. Install was simple and took less than 5 minutes. Time will tell if these two hold up to UV and dirt exposure but overall happy with the purchase.
by: Lynne06/20/2022
I’ve had this bike lock system for me Kuat rack for over a year. It works great!
by: - E -10/31/2020
Very easy to install
(in minutes) and to use... perfect fit for the Kuat transfer bike rack!!! Entire product safely secures the bike and the hitch. Highly recommend.
by: Ann 07/09/2021
Great product,
Quickly unlocks, but this locking device should be included with the purchase of a bike rack. Shouldn't be sold separately.
by: Chris 08/03/2020
Seems to work fine. Cable from ratchet arm could be a bit longer as it's a bit tight to secure through the frame in my case.
by: Nicholas06/26/2019
One key that's fits all! With this kit you only need one key to unlock your bike and the hitch pin that works with the anti rattle pin that comes with rack.
by: Kathy07/21/2019
Easy enough to assemble but just a basic deterrent. A bit pricey and I still think Kuat should have this
As part of the rack not an extra add on.
by: Carol 08/03/2021
Easy to install and works as designed; just exactly what I wanted and needed.
Carol J.
8/4/2022
Very good
by: Sheldon09/05/2019
Great product, easy install. Very happy with this purchase. Fantastic prices. Highly recommended!!
by: Emil05/26/2019
Works great, as intended. Fast delivery. Thanks etrailer.
by: Bill09/04/2021
The real deal, no complaints
by: James 11/28/2021
Excellent product, easy install and fast shipping
by: Michael 09/14/2019
Product was received on time and it was easy to install.
by: Eluterio07/17/2020
easy to assemble
good directions
by: Greg 03/20/2021
18
18
See what our Experts say about this Kuat Bike Locks
- Best Bike Rack for 1 Bike on 2014 Hyundai AccentYes the Draw-Tite Sportframe Trailer Hitch Receiver # 24884 fits your 2014 Hyundai Accent. The Kuat Transfer 1 Bike Platform Rack # KU64FR is a great bike rack that fits this hitch. The Kuat Transfer line of bike racks is one of my favorites. Its easy to use, durable and it looks great. The Cable Lock and Hitch Lock for Kuat Transfer 1 Bike Rack # ATSCLK11011 will keep your bike secured to your rack and your rack to the car. I attached a video of the 2 lock kit # PTSCLK12 so you can see...
view full answer... - How To Lock the Kuat Transfer 1 Bike Platform RackIn order to add locks to the Kuat Transfer 1 Bike Platform Rack part # TS01B the best option is to use the Cable Lock and Hitch Lock for Kuat Transfer 1 Bike Rack part # ATSCLK11011 as this gives you both a lock for the bike rack and the bike which uses the same key. The Kuat Transfer 1 Bike Platform Rack will work perfectly with the Draw-Tite Sportframe Trailer Hitch Receiver part # 24914 on your Mazda 3 Hatchback.
view full answer... - Lock For Original Kuat Transfer Bike RackThere is an option for a hitch lock for the original (manufactured before 2021) Kuat Transfer bike rack that you can use other than the Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks # HLT. The other option is a cable and hitch lock combination, with the hitch lock securing to the Transfer's existing hitch pin, and there is an option for 2 cable locks and a hitch lock, or 1 cable lock and a hitch lock: - 1 Cable Lock: Cable Lock and Hitch Lock for Kuat Transfer # # ATSCLK11011 -...
view full answer... - What is Cable Lock Support Arm For Kuat Transfer 1 Made ofThe top support portion of the Cable Lock and Hitch Lock for Kuat Transfer 1 Bike Rack # ATSCLK11011 is indeed made of plastic. I can't say definitively if a thief can quickly break it off with a hand tool as that's not something we try, but it is indeed mostly a deterrent. For something that doesn't have the same type of lock that can be broken off, RockyMounts has a cable lock that can't be removed with a hand tool, and would be difficult to cut due to its hardened steel, 5/16" width...
view full answer... - Kuat Cable Lock Alternative for SHERPA 2.0We have a different model of Kuat cable lock but no we do not offer the Sherpa 2.0. The lock we do offer comes in three different options but is not compatible with the Sherpa Bike Rack it works with the Kuat Transfer. You can purchase a single lock, a 2-pack, or a 3-pack. The single option is the Cable Lock and Hitch Lock for Kuat Transfer 1 Bike Rack item # ATSCLK11011. The 2-pack is the Cable Locks and Hitch Lock for Kuat Transfer 2 Bike Rack item # PTSCLK12. The 3-pack is the Cable...
view full answer...
Do you have a question about this Bike Lock?
Info for this part was:
Edited by:
Tyler C
Installed by:
Kathleen M
Written by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Chris T.
8/7/2021
Great rack. Cable lock is still just a little too short, as it would not make it through the frame on my rented Turbo Levo SL, and I had to simply had to secure it through the fork. Still wondering if it would be possible at some point to replace with a longer cable lock from Kuat.