To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use your Roadmaster tow bar to tow your off-road Jeep Wrangler Unlimited behind your motor home with these adapter brackets. They attach to the 3/4" thick shackle mounts on your bumper where the D-rings are attached.
Features:
Tow your off-road vehicle with your Roadmaster motor-home-mounted tow bar using these adapters. Simply attach the adapters to your tow bar's arms in place of the quick-disconnects. Then remove the D-rings from your Jeep's bumper and hook the tow bar up to the shackle mounts. These adapters fit shackle mounts that are 3/4" thick. They attach to the mounts using the holes where the D-rings are mounted. The adapter pins include sleeves that allow them to fit in both 7/8" and 1" diameter holes.
Average Customer Rating: 4.9 out of 5 stars (137 Customer Reviews)
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 3/4" thick shackle mounts on your bumper where the D-rings are attached.
Exactly what we needed for extending the electric connection from our RV to our Jeep. Fits perfectly and gave me just the right amount of length so there is no stress on the connection. Highly recommend
The adapters were exactly as described. This is the only way to go when attaching a Roadmaster tow bar to your d ring bumper. Took a bit of force, but I was able to press the provided bushings into the d ring.
These are what I had been looking for and they wernt even available from the manufacturer. They come with a slip in sleeve for one inch clevis tabs but are 7/8 hole and 3/4 inch wide slot. I'm using it on the falcon 2 tow bar. These ends come with slip on tips that must fit a different bar from the vendor BUT they can just be unbolted and are a direct fit to my thread on ends of my tow bar. Perfect fit! See photos of the last end pieces I tried as well from Amazon.
Ronn W.
11/1/2017
After a year of towing your product was still working perfectly. The stainless s spacers were a great asset. Thank you for a wonderful product!
I have a Jeep JKU with an aftermarket front bumper. This product allows me to use the D- ring mounts to tow the Jeep with my Falcon 2 tow bar. It worked perfectly no problems. The longest trip towing the Jeep was from SoCal to South Dakota and back. This setup worked flawlessly. One of the awesome things about this product is it came with inserts that allowed me to use these with my 1 inch diameter D ring holes because these are 3/4 inch
Tow bar adapters arrived within 4 days of placing my order. The adapters fit perfectly onto the D rings of my aftermarket bumper for my 2016 Jeep Wrangler and onto my old Roadmaster 5250 tow bar. Now I can tow my Jeep behind my motorhome.
Works good and was a good value. Customer service as always was spot on.
This is the right part to connect a Demco Excalibar 3 to a pair of Maximus-3 Front Tow Loops.
These two products made it possible to tow my lifted jeep with an after market front bumper thousands of miles without any issues
I have purchased numerous times from your company and have always been satisfied with quality, pricing and delivery times, you have a great company
These fit perfectly with the Maximus-3 tow loops for the Wrangler. I did not need the sleeves on the pins. The maximus-3 tie rod with maximus-3 supplied quick disconnect bolts fit as well.
I have a 2008 jeep wrangler which I tow behind my motorhome. The Roadmaster tow bar was set up for stock bumpers but I am now installing off road bumpers with a winch. These adapters install replace the original tow bar ends and will allow me to tow the jeep using the D-ring mounts. It took me five minutes to install them and although I have not towed the jeep there is no reason they will not work as expected. They will also allow any vehicle with a 2" rear hitch receiver to tow another vehicle with D-ring attachments. Great for off road enthusiasts.
George B.
6/7/2017
Perfect!!!
These mounts are part of the excellent Roadmaster tow bar system. With these mounts I can leave the Roadmaster cross-bar in the garage and use the shackle mounts in the bumper instead. Takes a bit of creativity to arrange for safety cable connection points and a new place to hook the winch cable but these efforts are well spent in order to clean up and simplify the tow system. Kudos to Roadmaster for this item and to etrailer for making it available.
This comment applies to both the RM-035 and the RM-035-1.
Robert
10/25/2018
Many miles later the mounts are working great!
These adapters are exactly what I needed. Looks like they will work perfectly to interface my Blue Ox tow-bar with my Jeep aftermarket bumper with D ring attachment points. Now i can tow either my Yukon XL or my Jeep Wrangler with one tow bar. Good Job Troy H!
Charles
8/9/2019
All is working as desired. Continue to be pleased. Thanks!
Very heavy duty.
Fits perfectly; durable; quality finis h;
Works great to flat tow our wrangler using the the d- ring mounts
Very helpful and prompt support as alwa ys!
They said it was for a road master tow bar but after doing some research they fit a demo perfect very well built and they look very strong .I am really satisfied Demco wanted 249.00 for there adapters and these were a lot less
Dennis
5/6/2018
Fantastic
Very robust and well built product. Product came with all the necessary hardware for perfect fitment on our 2002 Jeep Wrangler. The reason for the 4 vs the 5 star review is the fact the finish was damaged on one of the anchors when received. This doesn't affect the performance of he product, however it was unfortunate to see. It is possible however that the finish damage happened during shipping, although everything was fairly well packed so I am unsure. Either way, I would highly recommend this product for anyone needing proper tow bar anchors for oversized bunpers.
Jenny N.
4/15/2022
I will have our Customer Service team reach out to you. I recommend touching up the affected areas with a rust resistant paint like Rustoleum.
Helpful Links
This piece will not work the way you said it would work. Very disappointed The falcon to towbar will not connect to these Fittings! The part that connects it to the falcon 2 Has a threaded end on it . The piece you sent me has a bolt that goes through a pipe that is approximately 1 inch. The threaded in on a falcon two is approximately 3/4 of an inch. Part totally wrong in every way
Heather A.
10/30/2018
You are basically just replacing the swivel ears on the falcon 2 tow bars part # RM-520 with these adapters part # RM-035. Take the round nut off of the tow bar and mark the area where the round nut attaches to the end of the tow bar inner arm. Using the shoulder bolt that comes with the kit, nylon washers and nylon lock nut attach the original round nut with the tow bar attached to the adapter. The round nut cannot be moved forwards or backwards from the area that you marked or the shoulder bolt will not fit. If the round nut has moved the shoulder bolt will not hold the round nut in place causing it to rotate.
I've been very pleased with the Falcon tow bar. It was easy to setup and is easy to use. It handles my lifted Jeep Wrangler with ease, and has worked exactly as I expected it to. I use it with RM-035 D-Ring bumper adapters, and connecting the tow bar to my Jeep's bumper shackle mounts takes but a moment. It really couldn't be much easier to hook up and go. I also like the enclosed channels that manage the safety cables and light wiring, which makes for a very clean, un-cluttered towing setup.
Towed my Jeep TJ behind my motorhome all last summer using these with a Roadmaster Falcon All-Terrain towbar, connected to the tow points of the TJ's JCR Offroad TJFM-TX front bumper - no problems so far. These items greatly simplified the hitch arrangement, eliminating the low hanging square tube attachment points and crossbar of the original Falcon kit
The ends are heavy, strong , well made, fit my existing tow bar and work just fine ( as advertised). I ordered them to replace another style end due to changing tow vehicles, and the mounting point style/setup on the jeep. The ends have a 1" ID measurement. On the vehicle i went with a bracket setup from Maximus-3. There a frame mounted bracket setup using U-Bolts. There a D-Ring/tow loop setup. The bracket end, or ear where pin goes thru is 3/4" wide. This leaves a 1/4" of slop when mounted, which I wasnt 100% thrilled with. So, I ended up adding a thick washer on each side to take up the 1/4" of slop. A little bit of a pain when hooking g/un-hooki g, but completely functional with no issues. I called maximus to see if they could make their bracket in 1" wide matl and they said no, not an option. Again, all in all functional..
I ordered the wrong size. Replaced these with the set for 1" thick. Very well made though
Works great. Fits the D rings on my Jeep perfect.
Do you have a question about this Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joel P.
8/17/2018
Still very satisfied with these adapters. About to purchase a new tow bar and will switch them to the new bar.