Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

See what our Experts say about this Roadmaster Tow Bar Base Plate

• Will the Roadmaster InvisiBrake Work On a 2006 Jeep Grand Cherokee
  Yes, the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700 will work on a 2006 Jeep Grand Cherokee (All Models) which I confirmed with my contact at Roadmaster for you. In regards to installation, the best place to install the main control unit is under the driver seat. Please note, the Roadmaster InvisiBrake is for motorhome's with hydraulic brakes. I have attached some other parts you might be interested in below as well. Roadmaster Crossbar-Style Base Plate Kit part...
  view full answer...
• How to Determine if 2007 Jeep Grand Cherokee Laredo can Be Flat Towed
  I did some checking on whether your 2007 Jeep Grand Cherokee Laredo can be flat towed and if the vehicle has the Quadra Track II or Quadra Drive II 4WD it can be flat towed. But if you have the Quadra Trac I it cannot be flat towed. How you'll know this is if the transfer case has a neutral position. If it does, then it's flat towable. The Roadmaster base plate kit part # 1427-1 that you referenced would then be the correct fit. In addition to the base plates, you will also need a compatible...
  view full answer...
  
• D-Ring Kit for Flat Towing a 1998 Jeep TJ with Roadmaster Falcon All-Terrain Tow Bar
  Hey Tim, thanks for all of the info! The Roadmaster Kit # 1427-1 on your buddy's Jeep is for a different model Jeep which is why you're having issues finding that for your 1998 Jeep TJ on our site. The equivalent for your '98 TJ would be the part # 1417-1 but requires you to move your factory fog lights 1" for the kit to fit. Since you're wanting to switch to a D-Ring front bumper you'll need the Adapter Kit # RM-035-1 for 1" D-Rings. Please note you'll need to make sure your bumper is...
  view full answer...
• Parts Needed to Flat Tow a 2005 Jeep Grand Cherokee
  The Roadmaster 1422-1 base plate it is for the 2005 Jeep Liberty and will not fit the Grand Cherokee. Nor should it be modified in anyway to fit. The Roadmaster Falcon 5250 Tow Bar will work with the Roadmaster XL Base Plate Kit # 1427-1 To power the Jeep's lights the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 includes the diodes, wiring, and connectors you'll need. I've linked the installation on a 2012 Grand Cherokee for you. To keep the Jeep from overriding...
  view full answer...
• Will the Roadmaster XL Base Plate Kit # 1427-1 Fit On a 2007 Jeep Commander Limited
  The Roadmaster XL Base Plate Kit, item # 1427-1, will fit the 2007 Jeep Commander Limited. Minor trimming of the spoiler, air dam or plastic fascia may be required on some models of this vehicle.
  view full answer...
• Roadmaster Base Plate Kit for 2005 jeep Grand Cherokee
  With your Roadmaster Falcon Tow Bar part # RM-525 the correct Roadmaster base plate kit is the part # 1427-1. For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a...
  view full answer...
• Best Flat Towing Setup Recommendation for a 2007 Jeep Grand Cherokee
  First let's start with a base plate kit. For that I would recommend the Roadmaster Base Plate # 1427-1. This is the most popular option we have for your vehicle and I attached an install video for you to check out as well. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design...
  view full answer...
• Parts Needed to Flat Tow a 2006 Jeep Grand Cherokee
  For a base plate kit confirmed to fit your 2006 Jeep Grand Cherokee you would want the Roadmaster part # 1427-1. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Stowmaster part # RM-501. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and not...
  view full answer...
• Wiring and Base Plates Needed To Flat Tow a 2010 Jeep Grand Cherokee with a Falcon 2 Tow Bar
  When using the Roadmaster Universal Hy-Power Diode Wiring Kit, item # RM-154, you will need to determine the tail light wiring system on each vehicle. If your motor home has a trailer connector at the rear of the vehicle to start with, or it is a combined system that has the brake and turn signals on the same circuit you will need to use the combined RV to separate towed vehicle wiring diagram, second one down on the RM-154 product page. This is the most likely situation for wiring your...
  view full answer...
• Base Plate Kit, Tow Bar, Safety Chains, and Light Kit to Flat Tow a 2005 Jeep Grand Cherokee
  The Falcon Tow Bar, # RM-520, needs to fit on the base plates that are vehicle specific for your 2005 Jeep Grand Cherokee. I recommend the Roadmaster XL Base Plate Kit, # 1427-1 (will not fit the SRT-8 model or those with a brushguard). These base plates will work with the Falcon Tow Bar. You will also need safety cables or chains as required by law. This is so if the vehicle becomes detached from the tow bar, the chains will keep the vehicle in tow until you can stop and correct the problem....
  view full answer...
• Will the Roadmaster Base Plate Kit Part # 1427-3 Fit My 2007 Jeep Grand Cherokee
  For your 2007 Jeep Grand Cherokee the base plate kit you will need is either the Roadmaster XL base plate kit, part number 1427-1, or Roadmaster MX Base plate kit, part number 1427-3. Either kit will work on your vehicle, selection will depend on the tow bar you own or select and the features of each style of base plate kit. The XL base plate kit will require a cross bar on the tow bar and you will need the optional quick disconnects to easily remove the visible portions of the bracket...
  view full answer...
• Recommended Tow Bar Wiring For 2007 Jeep Grand Cherokee
  I called my contact at Hopkins and asked about your 2007 Jeep Grand Cherokee. They told me that you can look on the door jamb of your Jeep for a sticker that should have the manufacture date. If your Jeep was built from January to mid June then it is the early year model and the correct harness is part # HM56206. If you find that it was built after mid-year then the right harness is part # HM56207. If using a supplemental brake system a brake light relay like part # RM-88400 is required. Another...
  view full answer...
  
• Replacement Arms For Roadmaster Base Plates on 2010 Jeep Grand Cherokee & Rest of Flat Tow Set Up
  Let's start with the arms for the Roadmaster # 1427-3 or # 1427-1 base plates that fit a 2010 Jeep Grand Cherokee, and per Roadmaster "The replacement baseplate arms for this vehicle have changed over time. For Roadmaster to identify the correct replacement arms for your baseplate, complete and return the Baseplate Arm Order Form." The order form for the base plates is at this part number: - Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS Along with the arms, you'll also need...
  view full answer...
  
• Can I Change Roadmaster Crossbar Base Plate Kit on 2006 Jeep Grand Cherokee to Direct-Connect
  If your 2006 Jeep Grand Cherokee has the Crossbar-Style Base Plate Kit # 1427-1 then you need the Replacement Crossbar # RM-067 to mount this to the Roadmaster Falcon All Terrain # RM-522 or Falcon 2 RM-520 tow bar. Otherwise if you're wanting to swap to the direct-connect style on your base plate kit end you'll need to use the Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS - fill out the form on the page and send it in to Roadmaster. The arms you need to order are the C002383...
  view full answer...
• Parts Needed to Flat Tow a 2005 Jeep Grand Cherokee
  To flat tow your 2005 Jeep Grand Cherokee you would need to first start with a base plate kit. For that the Roadmaster kit part # 1427-1 is a confirmed fit and would work well. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For...
  view full answer...
• Base Plate Kit Compatibility with 2004 and Surrounding Years Jeep Grand Cherokee
  I reached out to my tech contact at Roadmaster and he said they don't have what vehicle the 1419-1 fits in their fit guide. They only have that it was listed as obsolete in 2004 so unfortunately I can't help you with that fit. The correct kit for a 2004 Jeep Grand Cherokee is # 1425-1. It looks like you have a model year close to that, so if you have a 2001-2003 Jeep Grand Cherokee you will want # 1419-7. If you have a 2005 model, you will want # 1427-1 which also fits 2006-2010 models...
  view full answer...
• Roadmaster InvisiBrake Supplemental Braking System for 2007 Jeep Grand Cherokee
  The Roadmaster InvisiBrake Supplemental Braking System, # RM-8700 fits multiple vehicles including the 2007 Jeep Grand Cherokee. Please note the linked product review and installation videos below. The other needed items to flat tow your 2007 Jeep Grand Cherokee are: Roadmaster Base Plate, # 1427-1 Roadmaster Falcon 2 Tow-Bar, # RM-520 RoadMaster Coiled Safety Cables, # RM-643 And for lighting, the Hopkins Plug and Play Harness # HM56207
  view full answer...
• Most Inexpensive Tow Bar and Base Plates for a 2008 Jeep Grand Cherokee
  It sounds like you're looking for a cost effective tow bar and base plate setup for a 2008 Jeep Grand Cherokee and if that's the case we have some great options. The most cost effective option would be to go with the Roadmaster Crossbar-Style Base Plate Kit part # 1427-1 so you could use the Roadmaster Tracker Tow Bar part # RM-020. There are no options to use the Curt Tow Bar on this vehicle.
  view full answer...
• Base Plates for 2010 Jeep Grand Cherokee Limited Compatible with Sterling Tow Bar
  Roadmaster Base Plate kit # 1427-1 is a correct fit for your 2010 Jeep Grand Cherokee Limited so long as it is NOT the SRT-8 version and does NOT have a brush guard installed. This is the best choice for use with your Sterling tow bar. Kit # 1427-3 does fit the truck but its safety chain anchor brackets will not work with the Sterling cables. This kit can be made to work but the Sterling's cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the...
  view full answer...
• Parts Needed for Flat Towing 2006 Jeep Grand Cherokee
  If a tow bar like the Roadmaster StowMaster # RM-501 is properly maintained, kept clean and protected during storage periods then it could be perfectly fine. If the tow bar is 10 years old and has never been serviced then a rebuild kit may be in order. For the Stowmaster RM-501 the rebuild kit is part # RM-910003-20. We offer tow bar cover # RM-052-3 for the StowMaster. For a compatible set of base plates I recommend Roadmaster's XL base plate kit # 1427-1. These work with the StowMaster...
  view full answer...
• Can Roadmaster Tracker Tow Bar be Used to Flat Tow a 2006 Jeep Grand Cherokee
  Since the Roadmaster Tracker Tow Bar # RM-020 is rated for 5,000 lbs you can use it to flat tow your 2006 Jeep Grand Cherokee with the Roadmaster Crossbar-Style Base Plate Kit # 1427-1. Just be sure that your Jeep stays under that 5,000 lb weight capacity. To complete your flat towing setup I also recommend using the 68" Safety Cables # RM-643, Optronics Magnetic Towing Lights # TL21RK, and the Brake Buddy Classic # HM39494. It is also important to follow any instructions in your owner's...
  view full answer...

Do you have a question about this Tow Bar Base Plate?