Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
Replacement ball assembly for your Ultra-Fab gooseneck tripod stabilizer (UF19-950400 - sold separately).
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this replacement 2-5/16 diameter ball assembly for the Ultra Fab gooseneck tripod stabilizer. Now this replacement ball assembly is for the Ultra Fab gooseneck tripod stabilizer part number UF19-950400. That part we do sell separately on our website and basically the gooseneck tripod stabilizer is used to stabilize your unhitch gooseneck trailer at the coupler, helps eliminate front to back and side to side motion of an unhitched trailer, and this adjustable height ball with the folding handles makes set up a snap.The threaded support right here at the base of this hitch ball lets you fine tune your height adjustment. This will screw into the top of the stabilizer, and then you turn the handle counterclockwise to raise the ball, clockwise to lower it.
The ball size again is the standard 2-5/16 diameter and this part is an aluminum construction. But that should do it for the review on the replacement 2-5/16 ball assembly for the Ultra Fab gooseneck tripod stabilizer.
Average Customer Rating: 4.7 out of 5 stars (60 Customer Reviews)
Replacement ball assembly for your Ultra-Fab gooseneck tripod stabilizer (UF19-950400 - sold separately).Anderson ultimate hitch compatable! Only thing stopping it from getting 5 stars is the neck under the actual ball could be 1/4” to 1/2” taller because if the legs on the tripod are not exactly level to each other the base of the neck/ball will rub on the red outer part of the hitch box. Other than that I have nothing bad to say. It significantly reduces trailer movement.
It seems to work, but must be level with the Anderson socket. The ears on the base of the ball just barely clear the plastic guide on the Anderson hitch. If the ball stem were just a bit longer it would work better.
Works perfect and saved me from having to buy another tripod.
Great, efficient service. Products were just as described
Works exactly like it is supposed to. It’s always a surprise when that happens! Thank you!
Works perfectly! Great product for stabilizing my gooseneck.
Fits the tripod perfectly.
Great product for Titan XD pulling a 5th wheel with an Anderson ultimate hitch. Perfect match with the kingpin tripod stabilizer. Easy to use and is a must for a 5th wheel RV. Recommend you purchase the leg extensions.
This was the only place that we could find this ball to go on a 5th wheel stabilizer. I called to find out about it, and they were very helpful, and it was delivered in a very timely manner and was just what we needed.
Clark R.
8/12/2020
Great, no problems.
I bought this to use with my Anderson hitch. I don't know what kind of tripod I have, but it did fit. It works great, exactly what I needed.
As ordered. No place had this in stock so it took longer than expected. etrailer.com communicated that to me right up front so it was a known fact. Not a popular item so I understand not having them in stock as that cost money and space. Very satisfied with the communication and the price.
I now have an Andersen Ultimate hitch and needed this for my old king pin tri-pod. Cheaper than buying a whole new tri-pod. This part replaces the king pin adapter and fits into my gooseneck adapter.
Thank you
I was happy I could order the Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs Item # UF19-950500 and the ball assembly screwed right in to replace the STD 5th Wheel cup. I have an Anderson Ultimate 5th Wheel Hitch, it should be a great pair. Have not tried the stabilization as its winter but this Spring I will know. I measured the height and should not loose any height for adjustment. Overall looks to be a good fit. Thank you
Works perfectly in my older kingpin tripod stabilizer. Now I can support the front of my 5th wheel with the Anderson Ultimate hitch coupling system
This is a difficult review. etrailer has been great throughout but there is just insufficient information to guarantee this was the correct adapter for my needs. It fit the Andersen adapter fine....it just did not fit my stabilizer tripod. What is one to do? There is no manufacturer identification on the tripod to reference what size thread the cup was. I assumed that there must be some sort of standardization but alas I was wrong. UF19-001057 has a screw diameter that is roughly .050" larger than the thread diameter on the tripod. I am left to absorb the cost of shipment from etrailer and back to etrailer.....You guys are great but this is obviously an anomaly in the marketing of this part.
I purchased this ball assy to use with my tripod setup because I have the Anderson setup on my 5th wheel. Works great.
This part was exactly what was needed to work with my Anderson hitch with 5th wheel tripod. Very pleased with it.
Wonderful product. Looked and looked for something for our 5th wheel compatible with Anderson Hitch.
Worked as described. Fit easily onto the tripod support. Sliding the ball into the Anderson Hitch receiver and locking it in place made adjusting the legs and high very easy.
The gooseneck ball replacement is great The shipping was fast and responsive I got my product before the due date I have ordered other products from E TrailerAnd very please with all my products thank you E trailer
I put in an Andersen Hitch and now the cup for the king ping has changed and I needed this ball. It works perfectly. I just screwed the other one out and this on in.
Received box in the mail. Took it home and replaced the cup in the tripod with the ball. No problems encountered. I was worried about the threads matching my current stabilizer but it went right in. Excellent service. I immediately went to the site to see if there was anything else I could get to replace parts. Very satisfied with the service and will be using this business in the future. Thanks.
Great for my gooseneck trailer fifth wheel stand.
Thank you I received my tripod a day earlier then expected. Installed it and it is doing exactly what its supposed to, it is a little early to make a good judgment on how much stabeler my 5th wheel is.
Works great. Couldn’t stabilize my 5th wheel without it.
The Ball adapter for my stabilizer for the 5th wheel fit perfectly and arrived very quickly... Ive dealt with etrailer a couple of times and have had great service...
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Hawk C.
9/12/2018
Great Anderson Hitch for the Nissan Titan XD with a Turbo Diesel to pull a 34 foot 5th Wheel