bing tracking image
Q & A Icon

What Is The Diameter/Threads Per Inch On The Replacement Ball Assembly UF19-001057?  

Question:

In the literature it states the Replacement Ball Assembly Part Number # UF19-001057 can be used with tripods UF19-950500 or # UF19-950200. I am not able to determine what is the part number for my tripod. The threads on the bottom of the cup type assembly which threads into the nut at the top of the tripod are 8 threads per inch and the diameter of the threads is 1-3/8 inch. What is the threads per inch and diameter of the threads for the Replacement Ball Assembly Part Number # UF19-001057? Knowing these dimensions would help determine if the Replacement Ball Assembly will work with my tripod. I am now using the Ultimate 5th Wheel Connection Part Number 3220 by Anderson Hitches. Thanks

1

Helpful Expert Reply:

Sure thing!

I went out to the warehouse and measured the:

-Replacement Ball Assembly for Ultra-Fab Gooseneck Tripod Stabilizer # UF19-001057, with a set of calipers # PTW80157 and measured 7 threads per inch, with a overall diameter of 1-3/32" (1.09").

Attached is a diagram and a product overview video for you to check out as well.

expert reply by:
1
Bryce D
Replacement Ball Assembly TPI / Diameter
Replacement Ball Assembly TPI / Diameter
(click to enlarge)

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>