Ultra-Fab Adjustable-Height Footplate for Landing Gear and Stabilizer Jacks - 8" x 5-3/4"
(8 reviews)
Price: $38.23
In Stock
Ultra-Fab Adjustable-Height Footplate for Landing Gear and Stabilizer Jacks - 8" x 5-3/4"
Item # UF17-940007
Retail:$44.59
Our Price: $38.23
You Save: 14%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (8)
- Q & A (0)
- Photos
Ultra-Fab Products Accessories and Parts - UF17-940007
- Camper Jacks
- Trailer Jack
- Jack Foot
- Ultra-Fab Products
Mount this extra-large footpad on your stabilizing jack to help prevent sinking and achieve a more stable setup. Threaded attachment point lets you fine-tune height. Supports up to 6,000 lbs.
Features:
- Extra-large footplate helps to prevent sinking
- Replaces existing jack foot
- Greater surface area than standard footpads provides increased stability
- Adjustable design allows you to fine-tune height
- Threaded bolt lets you raise or lower foot to achieve perfect height
- Great for leveling
- Perfect for most stabilizer jacks and landing gear used on 5th-wheel trailers and RVs
- Durable, 7-gauge steel construction
- Reinforced edges will not bend
Specs:
- Dimensions: 8" long x 5-3/4" wide
- Weight capacity: 6,000 lbs
- Lifetime warranty
17-940007 UltraFab Large, Adjustable Foot Pad
Customer Reviews
Ultra-Fab Adjustable-Height Footplate for Landing Gear and Stabilizer Jacks - 8" x 5-3/4" - UF17-940007
Average Customer Rating: 4.9 out of 5 stars (8 Customer Reviews)
Mount this extra-large footpad on your stabilizing jack to help prevent sinking and achieve a more stable setup. Threaded attachment point lets you fine-tune height. Supports up to 6,000 lbs.by: Mike05/11/2016
Phenomenal product and etrailer.com had them for the best price over all retailers. Received earlier than expected and they were super easy to install. If you have landing gear leveling issues these are for you.
by: William 07/23/2022
as soon as I set my 5th wheel on to truck will install these should help level when parking
by: Edward03/26/2023
Easy install about the same size as the original version that bent seems a little thicker though
by: Brian 03/28/2020
Perfect, only adjustable front RV pad, for a good price per product. Very happy.
by: Ken Damon04/20/2017
As always You folks came through with flying colors. The part is just what I wanted and the shipping was fast.
by: Steve L 07/06/2017
Makes easy leveling
by: Donald 08/21/2022
Great
by: Alane09/01/2019
just what I wanted as expected
8
8
See what our Experts say about this Ultra-Fab Products Accessories and Parts
- Lippert Components 5th Wheel RV Landing Gear Foot Pad LC314667 Attachment DimensionsThe Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 installs using a horizontal pin attachment, just like the similar parts # UF17-940006 and # UF17-940007. The photo I linked for you shows a close-up of the foot pad's attachment tab so you can compare to yours. The rectangular tab measures 1-1/2 x 5/8-inches and the hole diameter is 3/8-inch. These extra-large 9-inch pads, sold as a set of two, will reduce the tendency for the trailer jack to sink into softer ground...
view full answer...
- Are Ultra-Fab Adjustable-Height Footplates Sold individuallyThe Ultra-Fab Adjustable-Height Footplate, part # UF17-940007 is sold individually so if you need more than one you can make that change in the shopping cart when ordering.
view full answer... - Footplate Recommendation for Trailer Jack on 2014 R-Pod 178I do have a solution for a footplate on your A-Frame trailer jack for your 2014 R-Pod 178, but the Ultra-Fab Adjustable-Height Footplate # UF17-940007 is designed for landing gear and stabilizer jacks so it won't work for your application. Instead you can use the Lippert 5-1/2" wide Foot Pad # LC165253 if your inner tube has a 2" diameter or the Ultra-Fab 6" wide Foot Pad # UF38-751100 is your inner tube has a 1-3/4" diameter.
view full answer... - Weight of Ultra-Fab Footplates For Landing Gear and Stabilizer JacksThe Ultra-Fab Footplate # UF17-940006 for Landing Gear and Stabilizer Jacks weighs 3lbs. We also have the Ultra-Fab Adjustable-Height Footplate # UF17-940007 if you need to adjust the height on landing gear evenly. This also weighs only 3lbs.
view full answer... - What Is The Width Of Ultra-Fab Adjustable-Height Footplate Nut BracketI went to the warehouse and measured the Ultra-Fab Adjustable-Height Footplate, part # UF17-940007. I have attached a photo of the footplate with the dimensions noted. The width of the nut bracket is 1.587 inches and the height is 3.785 inches. The weight capacity for this footplate is 6,000 lbs.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jeffrey L
Updated by:
Wilson B
Updated by:
Halie H
Updated by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ken D.
4/20/2018
Perfect