Taylor Made Flat Mounting Brackets for Gas Struts - 2-1/4" Wide - Zinc Plated - Qty 2
(6 reviews)
Price: $6.18
In Stock
Taylor Made Flat Mounting Brackets for Gas Struts - 2-1/4" Wide - Zinc Plated - Qty 2
Item # 3691880
Retail:$28.52
Our Price: $6.18
You Save: 78%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (6)
- Q & A (0)
- Videos (1)
- Photos
Taylor Made Accessories and Parts - 3691880
- Boat Accessories
- Hatch Parts
- Taylor Made
Create connection points for gas struts by mounting these brackets on the inside wall of your boat's hatch. Socket on gas strut secures onto bracket's 10-mm ball. Zinc-coated steel is sturdy and corrosion resistant.
Features:
- Flat mounting brackets install inside your boat's hatch to provide attachment points for your gas struts
- Strut socket attaches to the 10-mm ball on the bracket
- Zinc-plated steel is sturdy and corrosion resistant
- Mounting screws not included
Specs:
- Ball diameter: 10 mm
- Dimensions: 2-1/4" wide x 1-1/2" tall
- Mounting hole diameter: 3/16"
- Quantity: 2 brackets
1880 TaylorMade Flat Mounting Bracket for Gas Shocks - 2.25" Long x 1.50" Wide - Zinc Plating - Quantity 2
Video of Taylor Made Flat Mounting Brackets for Gas Struts - 2-1/4" Wide - Zinc Plated - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Taylor Made Boat Accessories - 3691880
Today we're going to take a look at the Tailor Made Zinc-Plated Gas Shock Flat Mounting Brackets, our quantity of two. Now these are zinc-plated flat mounting brackets for mounting your Tailor Made gas shocks. I happened to pull one of those gas shocks here, and you can see the mounting brackets have the ball connector on it and the shocks have the retaining plate in there, so when you go to just push that down and it'll snap right onto that ball for attaching the gas shock.Now these mounting brackets are flat mount design. They are zinc plated for corrosion resistance. Notice they have three mounting holes. Now the mounting hardware to install these is not included.
You would have to supply that. It is for a quantity of two brackets. Last thing I want to do is just give you the measurement on it. The width of it is right at 2 1/4", and the overall height on it is right at 1 7/16" inches tall. But that should do it for the review on the Tailor Made Zinc-Plated Gas Shock Flat Mounting Brackets, for a quantity of two..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Taylor Made Flat Mounting Brackets for Gas Struts - 2-1/4" Wide - Zinc Plated - Qty 2 - 3691880
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Create connection points for gas struts by mounting these brackets on the inside wall of your boat's hatch. Socket on gas strut secures onto bracket's 10-mm ball. Zinc-coated steel is sturdy and corrosion resistant.by: Steven09/26/2020
by: Marshall 05/05/2021
by: Joseph 02/15/2021
by: David 01/04/2023
by: Scott 07/13/2021
by: Robert 02/01/2021
6
6
See what our Experts say about this Taylor Made Accessories and Parts
- Taylor Made Marine Gas Strut for Boat Hatches Length When CompressedI went out the warehouse and the Taylor Made Marine Gas Strut for Boat Hatches - 10 mm Socket - 20 lb Force part # 3691822 is 7-1/2" compressed center of ball socket to center of ball socket. You will also need brackets part # 3691881 and part # 3691880.
view full answer... - Do the Gas Shocks Come With Mounting Hardware IncludedA gas strut like the Gas Shock - 80 lb Force - 20" Extended, 11.41" Compressed - Black Nitride # 372-2300-80 is designed to replace an existing strut where mounting brackets are already present. If you're adding one completely new, you'll need the mounting brackets # 3691880 and potentially a ball stud like the UWS 10-mm Ball Stud for Toolbox Lift Strut (Qty 1) # UWSBALLSTUD. I've also linked some of our available tool box parts if that's the application you're looking to use these parts on.
view full answer... - Does the Gas Strut Included the Mounting BracketsThe Taylor Made Marine Gas Strut for Boat Hatches part # 3691850 is for just the strut. We have several options for the 10 mm bases however to pick what works best for you like the Taylor Made Angled Mounting Brackets for Gas Struts part # 3691883 or the Taylor Made Flat Mounting Brackets for Gas Struts part # 3691880.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.