bing tracking image
  1. Trailer Hitch
  2. etrailer
  3. Class III
  4. 2 Inch Hitch
  5. 5000 lbs GTW
  6. Concealed Cross Tube
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Retail:$311.45
Our Price: $226.93
You Save: $84.52
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 44 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. Great Prices for the best trailer hitch from etrailer. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part number e44AR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (93)
  • Q & A (0)
  • Photos

etrailer Trailer Hitch

  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • Concealed Cross Tube
  • etrailer
  • 750 lbs TW
  • 6000 lbs WD GTW
  • 750 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer
  • Matte black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 750 lbs
      • Maximum TW when used with weight distribution: 750 lbs
  • Limited lifetime warranty


Rugged, Matte Black Finish

The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.


Matte Carbide Finish vs Glossy Finish

Matte Carbide Finish vs Glossy Finish

etrailer Technical Support

At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



e44AR etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Item # e44AR

Installation Details E44AR Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e44AR

Average Customer Rating:  4.8 out of 5 stars   (93 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

by:

This is a nice hitch, and very well-made. No reason to may more for any of the alternatives, unless you have to have gloss black. Installation tip: you HAVE to clean out the threads of the imbedded nuts on your vehicle (if it has them), otherwise, you will have GREAT difficulty getting the bolts started into the frame. Etrailer has a great video on this. They say to allow 30 minutes for cleaning out the nuts, which is pretty close. I didn't have the correct size tap, so I did the "cut the groove into the bolt" trick in the video, but since I didn't have a spare bolt, I just used of the provided ones, filing a small groove in the first 3 or 4 threads with a small triangular file. Not long or deep enough to affect the strength of the bolt, but still serves the purpose. Take your time when doing this, as you don't want to cross-thread a bolt, and use lots of WD40. Also, this hitch is heavy! I managed it alone (on the ground) by propping it up on wood blocks, but I'm in my 70's so it wasn't easy.



by:
2024 Honda Passport

Super easy installation in about 15 mins with a pair of jack stands to assist.



by:
2021 Honda Passport

The product was inexpensive, the shipping was free and it arrived within 3 days of ordering it.

At about 46 lbs the hitch is pretty heavy so I recommend having 2 people install it.

The install was done in about 45 minutes with just me and my girlfriend. We used a crate and car jack to lift it to position and screwed in the bolts with a 22mm socket. The fit was perfect and the hitch looks and feels solid.



by:

we found this product online and watched a couple videos that were available on your site and made the decision to order this hitch. not only did we get free shipping, we also recieved this hitch within a couple days. Although I had to file a little on one of the slots for one of the fasteners to fit in placeit only took a few minutes to resolve the issue.the receiver fit our vehicle perfectly.



by:
2022 Honda Passport

Etrailer has a great website which is easy to use. Plus the instructional videos make what seems a daunting job, really easy. I use Etrailer for all of my hitch needs and the service and turnaround time is second to none. I think the hitch that I just received arrived at my home about 3 days after I ordered it. Top notch company and service and I highly recommend to anyone needing a hitch or related equipment.

Scott

10/24/2023

The hitch is holding up great. Still looks new. Easiest hitch ever to install!

Etrailer Expert

Mike L.

11/10/2023

@Scott Glad to hear your etrailer # e44AR receiver hitch is working well for you!


by:

This etrailer hitch is great,but heavy for an 81 year old. So I used a jack as pictured. Along with C- clamp and counter balance to get it placed under my Passport correctly. But I got it in. My grandson helped me torque it the next day. Any way perfectly fit my 2022 Passport. And looks very good.



by:

Took me a while to install as I'M 81 years old, 1 hour an 20 minutes, but I did it myself,no help. I used 3 ropes, one on each side an one on the end,
inched it up a bit at a time as I had no floor Jack. When it was high enough I weged it in place an installed the 6 14mm bolts. So it can be done with no help. Every place I checked wanted 150 to 200 dollars.



by:

Ordered the hitch receiver and cover just a few days ago and received it yesterday. Super quick free shipping! I was able to install it by myself using a couple of crates for support. Super easy and quick install, only took about 30 minutes total. I showed it to a neighbor who does a lot of welding and he commented on how nice the welds are on this product. Highly recommend the etrailer brand!



by:

Excellent product. Exact fit with no issues. Took about 15 minutes to install. My only complaint is the packaging. It was just loose in the box, and the finish on the hitch was a little scuffed up during transit. Nothing was through the powdercoat, however, and there was nothing you would see after installation.



by:
2020 Honda Passport

It took me 30 minutes since I was working by myself with a floor jack
The hitch came in good shipping box.



by:

The ordering process was incredible. Tracking the package was even more enjoyable. The graphics showing where the hitch was located is fantastic. But best of all YOU. Your follow-up and concern for my well-being was the best ever experienced! It was so incredibly easy to order and receive it. I am so ecstatic about it, I have told all the repair shops here about it. The whole installation only took less than 20 minutes. It was so pleasurable that I have and want to buy more things from you. All the best!!



by:

etrailer for the win! Could not have been any easier to find what i needed on the website and all the how to provided as well.. and could not have gotten shipped to my doorstep any faster! Half way across the country i might add, 3 days from order placed to install completion! etrailer exceeded expectations and there is truly no need to take your business anywhere else!



by:

Had some trouble with the 6 holes .
Had
to rotary file the holes a little.
Finish was not great, paint was scraped in 3 places.
Other than that, it’s a really sturdy hitch!

Michael A.

11/7/2023

Great



by:

I ordered the hitch with the suggested mounting bracket for the wiring harness. The bracket wasn’t even close to fitting. The hitch had nothing to mate to the harness and the harness mount is useless. I thought etrailer test fit but in this case the recommended bracket and hitch were incompatible.



by:
2020 Honda Passport

I have a 2020 Honda Passport and this trailer hitch receiver is really easy to install. I installed myself using a floor jack. Installation took me about 30 minutes. Initial placement took about 20 minutes. Extra 10 minutes was to Loctite and secure each bolt (6) with a torque wrench. Installation video was very helpful.



by:

Couldn’t be happier, very simple install, 6 bolts and done. Took me a bit to hook up wire harness inside panel on 23 Passport, tough angle to harness hookup, not sure that had anything to do with you all tho.



by:

Quality was good. Arrived in a timely manner, at a fair price. Installation went very well. Installed appearance was very good.

On the negative side. The receiver is sloppy and noisy going down the road.

Etrailer Expert

Jenny N.

6/16/2023

What I would recommend for the noise would be to add an anti rattle device when using accessories in the receiver. If your accessory is solid you can use part # e99007 or if the accessory is hollow then you can use part # 63232. Both can help minimize movement in the receiver.



by:

This hitch fit our Honda Passport perfectly. Took only 10 minutes with 3 people and correct tools to install this. Needed it for bike rack to transport heavy eBike.



by:
Honda Passport

Solid piece first class fit and finish. Easy install 30 minutes on a 2021 Honda passport.



by:
Toyota Highlander

Trailer hitch is robust & eTrailer's installation video was excellent. Spent more time preparing the weldnuts to clean out surface rust than bolting up the6 fasteners. Would be helpful if automakers plugged the threaded holes for trailer accessories to keep them clean until used (Toyota did this on our Highlander)



by:

Perfect fit.



by:

Great hitch but came with one missing washer. I had to go buy one at hardware store and couldn’t find exact match.

Etrailer Expert

Jenny N.

7/3/2023

Sometimes the hitch hardware is unique. I will have Customer Service team reach out so that can we can have the washer sent out.



by:

this thing is heavy and sturdy. the bolts are huge. the instructions are straightforward. I am having my mechanic install it because it's just easier that way but with 2 people you could get it done.



by:

So simple if you have a metric set of tools anyone can install this, mind you I installed on a three year old car that lived in Wisconsin, the threads were a little rusty on the car, but some penetrating oil and it went right on



by:

I have been using it a lot to move stuff from one town to another a couple of hundred miles apart and have not had any issues.


25
500
Show More Reviews

See what our Experts say about this etrailer Trailer Hitch

  • Trailer Hitch For A 2022 Honda Passport
    We have the perfect trailer hitch that is confirmed to fit your 2022 Honda Passport! The etrailer Trailer Hitch Receiver # e44AR has a bolt-on installation with no welding required. It has a matte black powder coated finish over a protective base coat that offers a superior rust resistance. The trailer hitch has a maximum gross trailer weight up to 5,000 pounds and has a maximum tongue weight up to 750 pounds.
    view full answer...
  • Question About a Product
    Yes, the Curt Easy Mount Bracket # C58000 is designed to fit 2" receiver tube openings so it would be a compatible fit with your etrailer Trailer Hitch Receiver # e44AR. I've attached a short video below where Joe will walk you through the installation process.
    view full answer...
  • Best Looking Trailer Hitch Receiver For a 2023 Honda Passport
    I recommend the etrailer Trailer Hitch Receiver # e44AR as the best looking receiver for your 2023 Honda Passport. This receiver has a matte black finish which will match with the factory accent panels. It has a hidden cross tube so the only part of the receiver that is visible is the 2" receiver tube and safety chain loops. The Vehicle Wiring Harness # C56291 will allow you to connect to the factory harness on your Passport. This will give you a 4-way flat connector for towing most small...
    view full answer...
  • Curt vs. etrailer Trailer Hitch Receivers For 2023 Honda Passport
    There is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Honda Passport, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that fit your '23 Passport are the following part numbers: - etrailer Trailer Hitch Receiver # e44AR - Curt Trailer Hitch Receiver # C13421 The matte black finish is nice as it hides the inevitable dings, scuffs and scratches...
    view full answer...
  • Trailer Hitch with Best Finish for 2020 Honda Passport
    The trailer hitch with the best finish for a 2023 Honda Passport is the etrailer Trailer Hitch Receiver part # e44AR. The etrailer hitch has a matte finish which is different to that glossy finish on the Curt and Draw-Tite options. The matte finish will help blend in better with the underbody paneling on the vehicle and it does a better job of hiding nicks and scratches. It also has a hidden crosstube design so only the receiver will be shown. Please note, if you'll be towing then you'll...
    view full answer...
  • Hitch Depth Differences for the etrailer, Curt, and Draw-Tite Hitches for a 2021 Honda Passport
    The etrailer hitch item # e44AR you referenced has the same protrusion from your rear fascia as the Curt Trailer Hitch Receiver item # C13421. These hitches are manufactured by the same company and are identical except for the matte coating on the etrailer hitch over the gloss coating on the Curt. The hitch pin hole on both of these hitches sits 4" inside of your Passports bumper. The end of the receiver is online with the rear bumper of your Passport. I have linked an installation video...
    view full answer...
  • Torque Wrench and Socekt Size for Installing 2019 Honda Passport etrailer Hitch Receiver
    Of course! To install the etrailer Trailer Hitch Receiver # e44AR on your 2019 Honda Passport you need a mid-range torque wrench and a 22mm socket. For a torque wrench you can use the Performance Tool # PTW3001C as a cost-effective option, but if you plan on using a torque wrench fairly often the Powerbuilt # ALL944001 is the better way to go. The Performance Tool has a gauge you have to look at and make sure the needle goes to the correct spot while the Powerbuilt is one that you preset...
    view full answer...
  • Trailer Hitch For 2020 Honda Passport With Best Finish
    The Curt # C13421 and etrailer brand # e44AR Class III hitches have the most durable finish and would be a fit for your 2020 Passport. The only difference between the two is the sheen on the finish. The Curt uses a glossy powder coat finish, the etrailer uses a matte finish. I personally prefer the matte finish, as it tends to blend in with the underside of the vehicle a little better. Keep in mind, that even though the hitches use a quality powder coat finish, the hitch will occupy a...
    view full answer...
  • Recommended Hitch for a 2024 Honda Passport
    Yes, I would be happy to! To add a hitch to your 2024 Honda Passport, I recommend the etrailer item # e44AR. This hitch is custom fit and bolts to your Honda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight. I really like the etrailer hitch item # e44AR because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. This not only looks better but helps with ground...
    view full answer...
  • Does the Hands Free Tailgate Function Work w/ a Hitch on a 2023 Honda Passport?
    Yes, it will but you'll lose some functionality by the 2" receiver. All of the hitches available for the 2023 Honda Passport block the sensors by the 2" receiver somewhat. What you will need to do is kick to the left and right of the center to find a spot not blocked. The etrailer Hitch item # e44AR you were looking at is confirmed to fit your 2023 Honda Passport. It is custom fit and bolts to your vehicle with included hardware. This is a class III hitch with a 2" receiver. I have...
    view full answer...
  • Best Trailer Hitch Receiver and Wiring Harness For a 2023 Honda Passport
    I recommend the etrailer Trailer Hitch Receiver # e44AR as the best receiver for your 2023 Honda Passport. This receiver has a matte black finish which I find gives it a more factory appearance. It also give you the ability to use a Weight Distribution Hitch # FA92-00-0800 to more safely pull heavy trailers. The 7-Way # CU86FR will connect to the factory wiring on your Honda. An Adapter # PK12716 is needed if you are towing a smaller trailer with a 4-way flat connector. If towing larger...
    view full answer...
  • Recommended Hitch, Wiring, And Brake Controller for 2023 Honda Passport
    For a complete towing setup for your 2023 Honda Passport you will need a hitch, wiring, ball mount, and brake controller. I recommend the following: -etrailer Trailer Hitch Receiver # e44AR -Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # CU86FR -etrailer Ball Mount Kit for 2" Hitches # 989900 -Redarc Tow-Pro Liberty Brake Controller # RED24FR The etrailer hitch is a Class III hitch with a 2" receiver. It features a matte black powder coat finish for an OEM look...
    view full answer...
  • Best 2024 Honda Passport Trailer Hitch and Wiring Setup
    I really like the etrailer Trailer Hitch Receiver # e44AR for your 2024 Honda Passport because it's the only option with a matte black finish that not only looks better, but is also more durable than the classic glossy black we see on the other hitches for your Passport. Then for wiring you can either go with the 4-Way # C56291 or the 7-Way # CU86FR depending on what type of connector your trailer has. I also recommend picking up the No-Drill Bracket # C57202 along with the 4-Way Bracket...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video Edited:
Chris R
Employee Dustin K
Video by:
Dustin K
Employee Schuyler H
Video by:
Schuyler H
Employee David F
Test Fit:
David F
Employee Bradley B
Test Fit:
Bradley B
Employee Justice A
Written by:
Justice A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924