Replacement Vacuum Pad for SeaSucker Bike Racks - 6"

Video Transcript for SeaSucker Bike Racks Vacuum Pad Replacement Review

Hey everyone, it's Evangeline here at etrailer and today we have the replacement vacuum cup for your SeaSucker accessories. So this is gonna be the six inch vacuum cup, and I'm gonna show you how to install it and put things together so you're back on the road. So things happen, maybe little bit of wear and tear has happened to your suction cup. What might happen is maybe you didn't clean this off properly and this is coming apart. Whatever the reason is, if you just need to replace the vacuum pad, this gonna be the exact replacement part for you. Also, depending on your situation, you might be more interested in the four and a half inch vacuum pad if you are limited on space, or the oval vacuum pad if you have ridges on your roof.

So these are all the parts that we took from the previous vacuum cup. You can find them here at etrailer. So to put them together, and this is also how you take it apart, you have the strap and then you have your vacuum plunger which pops right into that replacement pad. You have your housing which goes on top right there, and then you have your four mounting screws that use a Phillips head screwdriver. Once all four bolts are tightened up, then that's it.

Your new vacuum pad is secured. Moving forward, some tips for making sure this lasts longer is always use the cover when this is not on the roof. Also, try to clean it off whenever you have it off of your roof and make sure that this is free from dirt and debris. Make sure to get as many as needed for your situation. You can get them as a quantity of one or maybe even a quantity of five, like what we would need here for our SeaSucker bike rack.

This here was a look at the replacement six inch vacuum pad for your SeaSucker vacuum cups here at etrailer.