SeaSucker Single Tank Strap - Vacuum Mount

Video Transcript for Review of SeaSucker Marine Boat Accessories - Tank Mount- 6 Vacuum Cup Mount - 302-5531

Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the SeaSucker Single Tank Vacuum Mount. This vacuum cup carrier is going to allow you to transport a dive tank, fire extinguisher or nitrous tank safely and securely on your boat or truck. We'll just take the cap off here and show you our six inch vacuum cup. This is going to allow you to mount to most non-porous, horizontal or vertical surfaces.

It will attach and remove in seconds. Basically, you just get that cup on the non-porous surface. And you can see we've got our plunger here. We're just going to push this in until we no longer see that orange strip that is going to vacuum out all of the air inside the cup to provide that vacuum seal for us. So now that we no longer see that orange this will lift up to, it's got a pull rating of 210 pounds.

So it's going to be very solid for you. You might have to touch it up from time to time. If it loses suction you might see a little bit of that orange coming through. So then you just push it down a few more times and it will allow you to have a nice solid connection there. And then when you're ready to remove it you just break that seal by pulling up on one of the edges and it will lift up.

Your surface is not damaged. It's going to be nice and pristine, just like it was before. They do include this waterproof lubricant to help prevent any sticking from your plunger to the surface. But overall, it's going to do a great job of not leaving a mark and providing that solid connection for you. Then our jaw style clamp here is going to grip and hold on to our tank with no slippage.

This is going to work on tanks that are as small as our five pound fire extinguisher here. I'm just gonna pass it through the small loop get it to where it's nice and snug on there. So it will allow us to hold our five pound fire extinguisher and our 20 pound fire extinguisher here. Very easy to just wrap that around and tighten that down to the tightest setting it will allow. This will work for up to 80 pound tanks. So we'll do a good job for you whether it's a fire extinguisher or a dive tank whatever the case may be. One thing I do want to emphasize is that this is not a suction cup, so it's not a toy like you're used to with little dart guns or shower holders. So this is a very heavy duty vacuum seal. So when you apply the pressure it is going to hold, have a nice strong hold. Like I said, about 210 pounds for you. So it is going to do a good job of making sure that your tank is supported on your boat or truck or wherever it is that you're wanting to mount this. This is made here in the USA. So you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. And it does come with a limited lifetime warranty. So if you we're to have any problems with it you're more than welcome to reach out to us. We're always happy to work with our customers make sure that you're having a good experience and getting good quality products. I think this is going to be a really convenient way of adding a tank mount onto your boat or truck in a way that you can reposition it. If that, if it's getting in the way in one spot you can move it to another spot very easily and always have that tank available for you. So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..