What Does Rhino-Rack Antenna Mounting Bracket RR43196 Mount On

Question

Question:

Will RR43196 mount on Yakima roof mount tracks Y01135?

asked by: Doug

0

Expert Reply:

The Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding # RR43196 will not be able to mount to tracks like the Yakima ones you mentioned. The Antenna Mounting Bracket will mount to crossbar (or platform) channels but not tracks, because they have different channel dimensions.

So what you would need instead to mount the Antenna Mounting Bracket # RR43196 are crossbars with top channels like the Yakima JetStream Crossbars # Y00425.

I have added a link below to our entire selection of crossbars for you.

expert reply by: Kyle S

0

Answer 1

Yes it will! The Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding #RR43196 will fit the channels of your Thule AeroBlade crossbars perfectly. I've added a link to the written instructions of this…

view full answer...

Answer 2

The Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms #RR43196 does fit the channels of a Retrax XR tonneau and a Yakima Lock N Load platform like #Y05044-39. No other hardware is needed.

view full answer...

Answer 3

Instead of using the M8 T-Bolt #853-5715 for the Side Rails for Retrax XR Series Hard Tonneau Covers #RTT-82383 you can use the Square Nut #853-7557 instead. This has the same dimensions as the T-Bolt head section but this has threads for an M6…

view full answer...

Answer 4

Yes, the Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms #RR43196 will fit on your Summit Rack on your Winnebago Travato. These mounting brackets will mount onto Rhino-Rack Pioneer platforms, most crossbars with top channels, a…

view full answer...

Answer 5

The Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding #RR43196 is compatible with the Frontrunner Slimline II Roof Platform. The base that fits in the channel may need to be added before the platform is…

view full answer...

Answer 6

When using the Retrax Pro XR, the Overhaul #Y01151 is compatible when you use the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks #Y01155. This is lockable with the SKS lock cores #Y07204.

view full answer...

Answer 7

The Tie-Down Kit for Truck Hero Elevate Rack System part #TH52FR will be a great way to add tie down points to your Retrax Pro Xr Tonneau Cover like part #RTT-80383. These are designed to be slid into the track and fastened down to provide the…

view full answer...

Answer 8

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 would replace the Yakima SnapAround Mounting Brackets part #Y8810135 so that you can use your Yakima bike rack with the Rhino-Rack Vortex Aero Crossbars like part…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...