Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be taking a look at the Rear View Safety Backup Camera with a motorized tilt. This allows us to adjust that tilt on our camera so we can look back at traffic and then back down at our towed vehicle or whatever is right directly behind us. And so, it gives us some adjustability as far as what we're seeing behind our vehicle.Comes with everything you see here laid out on the table. That going to include our camera itself in that housing, and that's where it will actually make its little tilt. And we'll also get a sunshade to go on top of that and our mounting bracket. You can adjust the angle of that bracket by loosening up the two screws on either side.
And then, making any adjustments for the shade and how the camera's positioned.The cord comes directly off of that. Has a little built in grommet, or a already attached grommet, so that it can be mounted up and keep that hole watertight that you would have to drill through your RV to connect everything. Then we'll have 20 meters, or about 60 feet, of cable to attach to our monitor and other RVS devices.Now on this cable, we'll have our buttons to actually make that adjustment between going up and down. Just to kind of push and hold button so when it's pushed in, it'll adjust the camera down. And if we bring that back up, it'll adjust the camera up.
Have our other connections on the other end of that wiring and then, little RCA connector to mount that up to our other RVS accessories.It also comes with the hardware. We'll really just need four screws for each thing. We have four regular bolts and four lock nuts and then, four self-tapping screws. They do give you an extra of each one. So we'll have a fifth screw, a fifth bolt for out camera and nut and bolt for mounting up our camera itself.We also have the Allen key to make the adjustments for those little hex head bolts that mount up to our camera.
The camera is equipped with infrared night vision, and it is IP69K rated. Which means it's going to keep out any dust and debris, as well as the waterproof for any kind of inclement weather that we're going to be encountering while we're out on the road.So this is going to help you see more of that backend of your vehicle to make it safer while you're driving. Also comes with a one year warranty from RVS.And that's going to do it for our look at the Rear View Safety Backup Camera with motorized tilt.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.