LED Micro Bug Push Button Toggle Switch - Blue

See what our Experts say about this Pilot Automotive Accessories and Parts

• Can the Hopkins Rear View Camera System Be Used On The Front Of A Vehicle?
  Yes, the Hopkins Rear View Camera with Backup Sensors - 2-1/2" LCD # HM60195VA can be placed on the front of a vehicle. You will just need to determine which signal you want to give it power. Many people will choose to connect it to their vehicle running lights so they can turn the system on and off, but that is limited at night, so you could also install a switch like # PL-SW28B or # PK34500 if you desire.
  view full answer...
• Adding Remote Control or Switch to Gustafson Short RV Pendant Light #277-000311
  The Gustafson Short RV Pendant Light - Weathered Copper - Frosted White Glass # 277-000311 requires bulb 1076 which is not included. I recommend using # DI95VR as an option. This light fixture does not come with a remote control, but you could add a 12V transmitter/receiver and remote. We don't carry that, so the best option I can give is a switch like the LED Micro Bug Push Button Toggle Switch - Blue # PL-SW28B or # D16740 to give you access from another location.
  view full answer...
• Does LED Micro Bug Push Button Toggle Switch # PL-SW28B Stay Lit All the Time
  The LED Micro Bug Push Button Toggle Switch # PL-SW28B will only be lit up when the accessory you have it attached to is turned on. For example in the video, linked for reference, the switch is connected to the back up alarm on the vehicle which only has power when the vehicle is in reverse. You can see that the switch is not lit up until our installer shifts into reverse.
  view full answer...
• How to Install the Alpena LED Fog Litz 4 Part # ALP77160 with a Toggle Switch
  I do have a way for you to install the Alpena LED Fog Litz 4 part # ALP77160 on your 2010 Mazda CX-7 but unfortunately I cannot recommend you use them inline with your low-beam headlights as you would likely exceed the maximum amp draw allowed for that circuit. In order to install the fog lights on your CX-7, I recommend using them with a toggle switch such as the LED Micro Bug Push Button Toggle Switch part # PL-SW28B. In order to install the fog lights with a toggle switch you will need...
  view full answer...
• Adding Clearance or Running Lights to 1987 Chevy 1 Ton Dually Flat Bed
  You can run your wires directly from your battery using a switch like # PL-SW28B if you desire, or you can simply splice into your vehicle running light circuit. I recommend using a circuit tester like # PTW2993 to find a wire that has power to your tail lights or near your fuse box when vehicle is on ACC or running. You can use a quick splice like # SWC501925-1 to tap into that power easily. This will automatically turn the clearance lights on and off with your running lights.
  view full answer...
• Amp Rating of LED Micro Bug Push Button Toggle Switch # PL-SW28B
  The max amperage draw the LED Micro Bug Push Button Toggle Switch # PL-SW28B is rated for is 5 amps.
  view full answer...
• How to Install a Switch for Spot Roamer LED Bumper Lights on a 2004 Chevrolet TrailBlazer
  To install a toggle switch for your Spot Roamer, you will first need a switch. I recommend the LED Micro Bug Push Button Toggle Switch, part # PL-SW28B. For the wiring, you will need to take the ground wire of the lights and attach it to bare metal. Then, take the power wire of the lights and connect it to the white wire of the switch. From there, you will need to ground the switch's black wire. Finally, the red wire of the switch will need to be ran to the battery with a 5 amp inline...
  view full answer...

Do you have a question about this Accessories and Part?