Solera Awnbrella Support Kit for 14' to 18' Wide RV Awnings w/ 10' Projections

Video Transcript for Review of Lippert Solera Awnbrella Support Kit 14-18 Foot RV Awning 10 Foot Projection - LC362239

Hi everybody, Andy here with etrailer.com, and today we're gonna take a look at the Solera Awnbrella Support Kit for 14 foot to 18 foot wide RV awnings with 10 foot projections. These adjustable bows are going to hold your RV awning fabric taut and arched to prevent damage and correct sag, creating easy runoff for water and debris, so rain won't pool and tear the fabric. Now, they're also going to keep your fabric from flapping noisily and stretching out of shape over time, and these bows are going to work with most 10 foot projection awnings between 14 feet and 18 feet wide. Now, additional bows are recommended for every four foot of fabric beyond 18 feet, and these removable bows are going to snap into place on the underside of your awning and then tighten with the hand knobs. And you saw me adjusting at the beginning of our time together, so I'm just giving you a view of the ends there. Now, do keep in mind that these bows must be removed before retracting your awning.

Now these three bows are made here in the U.S.A. of rustproof aluminum, and as you can see here, installation hardware is included along with a set of instructions to walk you through the installation process. And just to give you some overall measurements on these bow arms, beginning with the length of the outer bow arm from end to end, we are sitting right at 75 inches long. And then each outer bow arm has two inner bow arms, and each of those inner bow arms measure 30 inches long. So we have one on this end here that I'm tightening up, and then you'll have one on the other end.

So each of those inner bow arms are 30 inches long. Now the maximum recommended spacing between the bows is 54 inches. And that's going to conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.

Thank you for joining me.