Replacement Mounting Bracket for Kodiak Disc Brake Caliper - E-Coat - 8,000-lb Dexter Axle

Video Transcript for Review of Kodiak - Trailer Brakes - KCMB-133-8DD-E

Today we're going to take a look at the replacement E-Coat mounting bracket for the Kodiak disc brake caliper for an 8000 pound Dexter axle.Now, this caliper mounting bracket is designed for use with 13 inch diameter rotors that have an eight on six and a half inch bolt pattern and use either 9/16th or 5/8th inch wheel studs.This is designed to mount to a four bolt brake mounting flange on an 8000 pound Dexter axle. This bracket is a heavy-duty ductile iron construction. Has a nice E-coat finish on it, provides corrosion resistance for fresh water and limited salt water use. They do use the embossed bolt holes here to provide extra thread contact for the caliper guide bolts and gives you a nice tight, secure connection between the bracket and the caliper.It is a side support design to ensure that the load is carried by the bracket, not just the bolts. The stiffeners on it help reduce vibration when you brake and it is a universal design. It'll work for either left-hand or right-hand side assemblies.

Again, the application is calipers on disc brakes with over-the-hub rotors.Axle rating: 8000 pounds.Axle type is Dexter.Again, it fits the rotor diameters of 13 inches and the brake mounting flange configuration of four bolt.That should do it for the review on the replacement E-coat mounting bracket for the Kodiak disc brake caliper for 8000 pound Dexter axles.