Signature Series Replacement Foot Assembly Kit
(10 reviews)
Price: $125.40
In Stock
Signature Series Replacement Foot Assembly Kit
Item # 58238
Retail:$222.08
Our Price: $125.40
You Save: $96.68
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (10)
- Q & A (0)
- Videos (1)
- Photos
Draw-Tite Accessories and Parts - 58238
- Fifth Wheel Installation Kit
- Hardware
- Foot Hardware
- Draw-Tite
Replace a foot assembly for your 16,000-lb, 18,000-lb, or 24,000-lb Signature Series fifth wheel with this assembly kit.
Features:
- Replace a foot assembly for your 16,000-lb, 18,000-lb, or 24,000-lb Signature Series fifth wheel with this assembly kit
- Includes assembly kits for 4 feet
- Made in the USA
58238 Signature Series Replacement Foot Assembly Kit
California residents: click here
Video of Signature Series Replacement Foot Assembly Kit
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Draw-Tite Signature Series Replacement Foot Assembly Kit - 58238
Hi there. I'm Michael with etrailer.com. Today we're gonna take a quick look at this Draw-Tite Replacement Foot Assembly Kit. This kit is going to replace a foot assembly for your 16,000 pound, 18,000 pound, or 24,000-pound capacity Signature Series Draw-Tite fifth wheel hitch. This will be an exact replacement from Draw-Tite, so you can trust it is gonna fit right in place of your original. This set will include the assembly kit for four feet.
So you might not need all four at the same time, but you'll have some backup hardware in case you run into any issues again in the future. So this kit is going to come from Draw-Tite, so you can trust that it is gonna fit with your fifth wheel hitch. You're not gonna have to worry about compatibility issues or anything like that. So if you're needing to replace any of this hardware, this is gonna be the kit that you need. So that completes our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Signature Series Replacement Foot Assembly Kit - 58238
Average Customer Rating: 4.3 out of 5 stars (10 Customer Reviews)
Replace a foot assembly for your 16,000-lb, 18,000-lb, or 24,000-lb Signature Series fifth wheel with this assembly kit.by: Ross12/11/2021
Just what I required to replace a bent handle without having to purchase the whole adapter. Bonus is now I also have spare parts.
by: Kevin 08/17/2023
Only problem is when I order from places on line then my ccard gets hit. Makes me wander if there employees are selling my numbers
by: Carl J.11/11/2014
Everything in the package was of great quality,however, the main bolt or shaft part of the foot was not the same as the original. If you snugged up the bolt to remove sloppiness , but easy movement of the handles, the foot part of the hitch would not engage into the puck part of the truck bed. I had to back off the tension on the handles and leave an 1/8 to 3/16 th. on an inch free play so the foot would turn and lock in place. When I compared the new foot part of the assembly one could see that the old bolts were stepped about 3/16th of an inch which eliminated the slopeyness and allowed the handles to turn and lock the foot in. Strange this was not a feature of the replacement assembly. Etrailer , was excellent in their helpfullness in arranging to find and ship the assembly and puck caps. Would definitely go to Etrailer for my next purchase. Thanks
by: Cheyne11/13/2020
This is a hard to find hardware kit which etrailer had in stock! Exactly what is needed to freshen up old beat up cam hold downs for a Reese or Drawtite 5th wheel.
by: Jim M.09/26/2018
Unfortunately I only needed one handle from this collection of parts. Previously I was able to order the needed handle but now I am required to order an entire collection of parts for almost 10x what a single handle cost me. This is likely due to the manufacturer deciding it could make much more money on the set vs. selling the individual parts.
by: Mylo03/29/2023
Perfect and fast thank you
by: Geoffrey10/26/2017
Perfect replacement
by: Lee M10/01/2022
Fast, friendly and knowledgeable help. I received my order in a few days.
by: Ben 03/12/2021
by: Tom 08/07/2021
10
10
See what our Experts say about this Draw-Tite Accessories and Parts
- Is Signature Series Replacement Foot Assembly Kit 58238 a Fit for Ram Rail KitsYes and no... The puck design that the # 58238 fits is the same as the Ram rail kits, BUT there isn't a hitch that this adapter fits that has the correct puck spacings to fit a Ram rail kit. The Ram rail kits are spaced differently than the Ford and Elite Reese rail kits. The hitches that this adapter fits is the older style Signature Series which predates the Ford and Elite rails. There were no hitches that would need this adapter and would be spaced properly to fit the Ram rail kits.
view full answer... - Difference Between Reese Elite Signature Series Feet Kits RP58419 and 58238 The part # 58238 that you referenced is for the older style Signature series fifth wheel hitches and is a replacement foot assembly kit. Whereas the part # RP58419 is for adapting a Signature series hitch to fit the newer Elite style rails.
view full answer... - Replacement Anchors for Reese Signature Series 5th Wheel Trailer HitchesI spoke with my contact at Reese and he said that you would need to get the whole kit, # 58238, if you need to replace any of the anchors on the hitch. The single ones are no longer being provided by themselves.
view full answer... - Replacement Foot Assembly Kit Recommendation for a Reese Elite 26.5k Fifth Wheel HitchSounds like you need the part # 58238 for your Reese Elite Series Pre-Assembled 5th Wheel Trailer Hitch # RP30871.
view full answer... - Replacement Anchor Handles for a Reese Signature Series 5th Wheel Slider Trailer HitchWe do have the replacement handles for Signature Series 5th wheel trailer hitches. You will need # 58238 for a complete kit.
view full answer... - Signature Series Replacement Foot Assembly Recommendation for an Elite Series 18k 5th Wheel HitchI spoke with my contact at Draw-Tite and he informed me that you would want a Signature Series Replacement Foot Assembly Kit # 58238.
view full answer... - Replacement Foot Adapters for Reese 18k 5th Wheel Hitch for Ford Factory Rail System Pucks Since you purchased a Reese 18K hitch for Ford Factory pucks the foot # 58238 is what you need for the older style Signature series fifth wheel hitches and is a replacement foot assembly kit. If you have the newer style, then # RP58419 is what you need for the Elite style replacement. If you are looking for something else, send me a photo of the part and we can go from there.
view full answer... - Can a Reese Signature Series be Used with a Ram 2500The Signature Series Replacement Foot Assembly Kit, part # 58238, is a replacement foot assembly for the older Reese Signature Series 5th wheel hitches. Unfortunately, none of these were compatible with the Ram OEM puck systems because the spacing for Rams is different than for Ford's (which the Signature Series fits). As such, this foot assembly kit will not get the Signature Series to work with the 2020 Ram 2500 (or any other Ram)'s puck system. The only recourse for a Ram owner is...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ross
12/12/2022
Great Prouduct, bonus is you dont have to replace the whole adapter whan you bend a handle.