Sealed Pressure Switch for Bulldog Winch Air Tank - 165 to 200 psi

Video Transcript for Review of Bulldog Winch Air Tank Parts - Pressure Switch - BDW42012

So we will be taking a quick look at the Sealed Pressure Switch for Bulldog Winch Air Tank. And this is going to keep your air tank at a relatively constant pressure. Whenever your tank reaches 65 PSI, this is automatically going to turn the compressor on and fill it back up to about 200 PSI, and then it will automatically switch your compressor off.It's a sealed switch, so we don't have to worry about any kind of dirt or debris or water from getting into this and causing any issues, so it's safe to have it mounted on the underside of your vehicle. It's going to thread right into your tank so it can monitor that pressure. It has a quarter-inch NTP thread, comes with this little cap to go over it in transit to keep everything nice and tight and tidy. And then we'll have our wires coming off the other end, which can then get connected into our compressor.It works with 12-volt and 24-volt systems.

Comes to dimensions. our pressure switch is about two and a half inches long if we go from the end of the threads there to about where the leads come off the back, and then it's about one and an eighth inch in diameter. Our cables coming off the back of our leads are about five and a half inches long, so we have about five and a half inches of wire to work with there.The max amps that this works with is 30. Again, our restart pressure is 65 PSI, or that's when it will turn on that compressor. And then it will turn off at 200 PSI.Comes with a one-year limited warranty from Bulldog Winch, and that's going to do it for our look at the Sealed Pressure Switch for Bulldog Winch Air Tank..