Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Extend the life of your trailer's suspension with this heavy-duty hardware kit. 1/2" Thick steel shackle straps will outlast the standard straps on your double-eye leaf springs. Wet bolts and bronze bushings help keep your setup lubricated.
Features:
Specs:
Average Customer Rating: 4.7 out of 5 stars (1088 Customer Reviews)
Extend the life of your trailer's suspension with this heavy-duty hardware kit. 1/2" Thick steel shackle straps will outlast the standard straps on your double-eye leaf springs. Wet bolts and bronze bushings help keep your setup lubricated.every thing ordered fit perfectly a little labor intensive but job completed in approximately 6 hrs shear springs will make a big difference as the old ones had worn out and were splitting bad on left side not so much on right but replaced both sides and all bushings and new wet bolts and shackles now the suspension is like new as my Montane is 10 yrs old
I sent the following comments by email earlier:
Nothing looks damaged although the packaging for shipment could be better. And when I opened the box with the shackles and wet bolts, it was obvious this was a returned order by someone else. It was not properly repackaged, and everything thrown in the box loose. Most of the parts were already cut out of the plastic shrink wrap and carboard backing. The only thing I can see missing at this point is the instructions. However, I have watched enough of the videos provided by eTrailer to be familiar with the installation process.
Thought I would let you know.
Jenny N.
3/13/2024
I can see that the kit was not packaged well and I will let out shipping department know. Please see the link below. I am linking the instructions for the kit.
Helpful Links
You need to make these brackets fo the sumo spring. My wet Bolt kits were great ! Much needey.
Scott
10/9/2023
They have been working great!! Those brackets give more contact for the Sumo Springs.
Mike L.
10/25/2023
Scott
10/30/2023
The MORryde leaf spring upgrade with he grease fittings has been great! They are night and day different from the stock ones.
Mike L.
11/14/2023
When starting the installation remove the shackles from the fixed hangers first. When lowering the spring to expose the old bushing after taking out the bolt, lower it just far enough so it stays in the hanger but you can still knock the old bushing out. This way if the spring is slightly load to one side it will be easy just to jack the spring eye back in place with out have to struggle to line it back up. Ask me how I know. Other than that it was pretty straight forward. Looks to be well built.
Roy
5/13/2024
The MORryde kit should be standard equipment on trailers,its that good. And no, Im not paid by MORryde.
I like that I can grease the bolts as the old ones were seized up. What I do need is four more bolts like the ones that go with the shackles for the other end of the spring. The existing springs had 1/4” positioning plates. I used existing bolts for now. Do you sell just four of the longer bolts?
Jenny N.
7/28/2023
We do not have longer wet bolts then the ones that came with the kit which are nine sixteenth bolts that are 3.375 inches long. If you just wanted four more of those bolts we do have them separately as part # MR52HR.
The package arrived as scheduled. Must have gotten banged around as the box had slight damage in one corner and two of the shackels were broken away from the package. The shackels sure look heavy duty. I could see a bolt breaking before any of these shackels
Everything fit very well, easy to install. I did have to drill out my equalizers for the bushings but my equalizers are of an old design. Very satisfied.
I installed the MORryde CRE3000 and wet bolt kit on my 2021 East to West Alta 2850KRL and it was the easiest install you could want. From the time I jacked it up and got the tires off, total time spent was 2 1/2 hrs. That included running to the tire shop to have new tires mounted. Can't wait to get it on the road to see how it handles. Thanks E trailer.
Very pleased with this purchase. Make the ride lots smoother. Installation was a breeze and instruction east to follow. Anyone with tools can do themselves ( need Jack and Jack stands for the weight of your unit)...
I thought the price was good and have purchase a number of things from etrailer.... always happy!
These arrived today and look like well made components. I'm especially happy that they're made in the USA. I hope that MORryde knows that where things are made, especially when they relate to people's safety, is very important.
The item was well packaged and arrived to me in great shape although USPS was a bit slow. Etrailer communication was excellent as always.
These shackle turned out to be very well built, nearly twice the thickness and assuming you have basic mechanical skills, and can safety lift and support your unit to install, they were very easy to install. Mine have been installed for about a year and maybe 7K miles with no issues to report. While, I don't know how important the greasable aspect of these shackles are, it is nice to know I can easily grease them each year while inspecting my bearings.
It is a quality product, it is a wonderful kit. I pulled the trailer around the block and the axles did not walk out on sharp corners like the old ones did and with the cre3000 it felt like it pulled better over rough roads
Ronald B.
12/26/2023
The suspension seems to be alot tighter when jack knifing, like no banging or axle stiking way out and seems to pull better on all roads. I am very happy with it.
Still working fine. I am glad I replaced my factory shackles. I was amazed how worn the original equipment was after 3 years of use. I think every trailer should come with shackles that can be greased.
I just installed these today with the help of a talented friend. It took us about 3 hrs total and there were absolutely no surprises whatsoever. We lifted one side of the trailer and completed the work with the other side resting on the tires. I thought the weight of the trailer on the other wheels would mess with us but it had no bearing on what we were doing, it may have even helped us. After finishing the first side in 1 1/2 hrs, we did the second side in a little over an hour. I was surprised. After finishing each individual side we greased the zerks, installed the wheels and tires, and moved to the other side. I'm very impressed. These shackles are twice the thickness of what came with this Jayco RV. So far I'm a happy camper. I can't imagine any issues going forward, but if any crop up I will surely report back.
Great improvement in trailer ride and not hearing the trailer suspension pop and snap when going around corners. Huge improvement would highly recommend to anyone towing a trailer.
The front&rear bolts are not long enough. Need to be 3-3/4” usable length Spring mounts on trailer have have 1/4” washers on both sides of mount that’s why bolts weren’t long enough
This is a heavy duty upgrade kit, the shackles were twice as thick as the ones I replaced. The bronze bushings were a great upgrade from the nylon bushings that were currently used on existing suspension setup. Love having the wet bolts allowing for bushings to be greased without disassembling any parts. Would recommend this upgrade kit to anyone replacing their suspension system
All hardware it very good quality. Nice upgrade when my factory hardware broke.
Alex was great on the phone answering questions and explaining what he saw in the photos I send of my busted shackles. He explained that this kit had thicker shackles to go with the wet bolts that should beef up suspension for the rough roads we have for using this horse trailer. Time will tell if they hold up better but Alex was great.
This product is a great upgrade from original suspension system, why this has not come out sooner is beyond me. I would have given a 5 star but none of the shackle bar pins would take grease. I had to replace all zerts and clean out drill shavings from each shackle bar pins. The wet pins were of no issue. Check your pins before you assemble that they take grease.
Just received the Morryde wet bolt kit and installed it his afternoon. The cost was a little more than Amazon but was available a month sooner, helping me get back on the road. The kit was well packaged and easy to use. I recommend viewing a [online] video regarding installation, there are many out there.
I had worn out my original shackles (nylon bushings, dry bolts, thin shackles) and ungraded to wet bolts, brass bushings, and thick shackles. I ran into a problem when I discovered that the non-shackle bolts supplied were too short for my Correct-Track system. I used the old (dry) bolts to complete the job.
These have worked great for me- definitely recommend this kit. Also, this kit has the components you need for 1 tandem axle trailer (2 axles / both sides).
The increased durability and strength of these Shackle straps will no doubt insure a better ride and provide peace of mind. I am also looking forward to being able to grease them much easier. The quality of the product is outstanding. I was also impressed by Paul for his help and getting the items shipped in a timely fashion so we could install in time for our season to start!
This Kitty had everything I needed to came the bushings and shackles! William was extremely helpful in finding the correct parts. I received them very quickly. I attached a photo of the old ones. Definitely needed replacing. This job has some difficulty. You definitely need some jacks to support the axle. But I took my time and used the jacks to help me.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Frank S.
6/29/2023
perfectly