Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be reviewing part number F-4. This is the Curt Class I and Class II Pin and Clip. It's going to give us a diameter of 1/2". This is designed for 1-1/4" x 1-1/4" hitch openings. The overall length of the pin is going to give us a measurement of right at 4". The amount of usable space that we have is from the pin hole to the curve. That's going to give us a measurement of 2-1/2".
It does come with a retaining clip. That way you can secure the clip on the other side of the pin. The way this works is you just, in your Class I or Class II hitch, after you get your accessory loaded up, you need to line up your pin holes, place the pin through one side of the hitch, through the accessory pin holes and out the other side of the hitch. Once you have that through you just simply take the clip and place it on the other side of the pin to secure everything in there and to make sure that your accessory is not going to come out of your hitch. It has this nice point tip. That way it's just an easier installation as you slide it through the pin holes. That's going to do it for today's review of part number F-4.
This is the Curt Class I and Class II Pin and Clip measuring 1/2" in diameter. .
Average Customer Rating: 4.8 out of 5 stars (699 Customer Reviews)
This 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.
works well, but with the particular hitch, the safety chain loops make getting the clip in the pin hole a little difficult. Slightly longer pin would be great
Very nice Hitch Pin & Clip. Fits really well, I had some in the past that didn't.
Solid, Does it's job, and is cheap. What more could you want?
It's a pin. What can one say?
Great product, tho directions called for 19mm socket (actually uses 18mm socket). Installed in my driveway using common tools, and drove the rear wheels up on some blocks of wood to get a couple extra inches of space to work. I loved the 'fishing wires' that came with to get the bolts and spacers through the holes - how clever!
Arrived 1 day early. Will buy from etrailer agin
I always seem to miss place the pins so I got extra, the personal at rtrailer are great, Tammie you did a great job, that's why I keep coming back
Les C.
4/29/2023
Works great, Tammie did a great job,I will an have told my friends
They did the job!
I got this a year ago to install on my tiny Honda Fit.It was easy to put together myself. I needed extra room to attend art fairs with all my product and displays. It works very well and so easy to take off and put it back on whenever I need to use it.
Excellent service, quick responses to questions and delivery
I ordered this part by accident I didn't notice it came with the hitch. I'm going to keep it. I have a bolt in one of my other vehicles.
like the stuff I;ve ordered so far!
Fits good and tight into the space available, and designed to take advantage of the strongest part of the unibody.
Pro tip #1: On Subaru installations calling for cutting out an opening, take the time to remove the bumper, allowing access to the unibody tunnel without hacking a hole into it, to insert the carriage bolts and reinforcement plates.
Pro tip #2: While you have access to the unibody tunnel, now is a great time to apply Fluid Film/Woolwax/B'laster Surface Shield to the interior of the unibody, bumper, and undercarriage, to make your automobile last much longer!
Nice fit. Shipped fast.
Rcvd my hitch today (one day earlier than predicted by etrailer when I ordered...well done!). Everything was received as expected/requested.
Crawled under the car and started installation immediately. Piece of cake really; although some people would struggle with the tight space, 13 year old car, and need to clean threads, and remove caulk/undercoat in order to achieve "hole alignment".
Hyundai also did a great job by having pre-threaded welded nuts in place.
So far.... a great product received in time to use this weekend (as was my plan).
Great job and great product by etrailer.
Also, the website was easy to use and the videos quite helpful.
I will be back!
Thank you,
2008 Hyundai Sonata
Frank
10/20/2022
Hitch etc is holding up fine. Routinely used to pull trailers up to 2000 lbs with a 2008 Hyundai Sonata. I avoid going over 55 mph, or sway is detectable.
It's a hitch pin. What could go wrong.
Thanks for the fine service and quick delivery.
It’s a hitch pin, it worked great. I don’t leave my hitch on 24/7. I would recommend a locking hitch pin if you plan on leaving your hitch on permanently. I only use mine a few times per year, so this one was perfect.
self explanatory.
The most straight forward install ever. Excellent instructions, four bolts and your done. The only thing you really need is a torque wrench. Well designed product and no interference with stock exhaust on my 2011 VW GTI.
Ended up not needing it because bike rack came with pin but good for a back up I suppose.
Both products I ordered were received within 2 days. Etrailer provided excellent communication throughout, letting me know who was responsible for overseeing my order and it's status.
As described, it's a hitch pin and clip for 1-1/4" hitches. Wow!
Quick. Fair Price. Excellent Communication. First, we ordered the hitch and had it installed. Then we needed the perfect fit for the task at hand: to pull a tank with gray water through a campground. Very specific. Just for our toad, a Smart car.
Etrailer.com has the perfect software to lead you to what you need for the perfect combination. Quick shipment, reasonably priced. Direct communication for every step in the process. All in all, exactly what you’d hope for during these extremely dysfunctional time.
Every part excellent quality. Perfect fit, all parts were exact for my vehicle. Watched the video on youtube for wiring and being a mechanic for over 50 years was able to connect signal lights all from driver side of harness. Instead of leaving plug inside trunk I wired through the rubber outlet to the back of the hitch ready for use. Very happy highly recommend etrailer.
Brad H.
9/24/2018
Very happy with products all high quality feel confident using. Thanks
Not much to say about a hitch pin.
Do you have a question about this Hitch Pins and Clip?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
5/3/2024
We do have a hitch pin that would be longer, it is 3 inches with its usable length, part # ML1495DAT. And it also doubles as lock.