Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs

See what our Experts say about this CURT Trailer Hitch Ball Mount

• What Parts Are Needed to Use Hitch on a 2007 Nissan Murano and How are They Installed
  For your 2007 Nissan Murano, you will need the following parts: Curt Hitch Class 3, 2 inch hitch part # 13571 is one of our best selling for your Murano and it requires no drilling for installation. Curt Ball Mount part # C45010 is the manufacturer recommended ball mount for this hitch and pin part # PC3, or lock part # e98880 to hold it in place. You will also need to select a ball that will fit both this ball mount and the trailer coupler. The ball mount uses balls with a 1-inch shank...
  view full answer...
• Parts Needed to Equip 2019 Lexus RX350 for Towing Rental Trailer
  For a trailer hitch, the Curt # C13272 Class III hitch would be my recommendation. I prefer the finish Curt uses on their trailer hitches. For a trailer wiring harness, I'd go with the Curt # C56217. For a ball mount, use # C45010 and # 63845 for a trailer ball. Rental trailers will use an adjustable coupler, so it'll work fine with the 2 inch trailer ball I recommended. If the trailer is large enough to require brakes (above 1500 lbs, I believe) the trailer will have a surge coupler,...
  view full answer...
• Will Draw-Tite Class III Hitch 75122 Fit with Full Size 16-Inch Spare Tire on 2003 Chevy Astro
  Yes, the Draw-Tite Class III Hitch # 75122 will still allow you to store your full-size 16-inch spare tire under the vehicle after hitch installation. I have linked several hitch install articles as well as a video to illustrate the process of mounting this hitch. It comes with all required hardware. If you need a 4-pole wiring harness you can use # C55411 from Curt. The recommended ball mount is part # C45010 and with it you can use hitch ball # 63845 if you need a 2-inch ball, or hitch...
  view full answer...
• What Vehicles Does Curt Class III 13594 Hitch Fit
  Thanks for the kind words! The Curt # 13594 is a fit for the 2012-2015 Chevy Captiva Sport and the 2008-2010 Saturn Vue only. For your 2019 Buick Enclave, I'd recommend going with the Curt Class III hitch part # CU29FR as it offers the best ground clearance and is the least visible of the available hitches. If you'll be using the hitch for towing, you'll also need a trailer wiring harness # 118761 for a 4 pole or # 118287 for a 7-way trailer connector. Use # C45010 for a ball mount...
  view full answer...
• How Visible is Draw-Tite 76209 Class III Hitch Compared to Curt C13382 on 2021 Subaru Crosstrek
  It is not. When installed, the Curt # C13382 would be mostly concealed behind the bumper fascia, with only the receiver opening and safety chain loops being visible. The Draw-Tite # 76209 will be fully exposed, with the hitch crossbar being fully visible under the rear bumper. I've provided a side-by-side photo showing the installed appearance of the two. If you'll be towing with the hitch, you'll also need a trailer wiring harness, part # 118467, a ball mount like # C45010 with pin and...
  view full answer...
  
• Does Capacity of Curt 2 Inch Hitch for 2022 Subaru Outback Meet Towing Capacity of Vehicle
  The towing capacity of the 2022 Subaru Outback depends on which engine the vehicle's equipped with. 2.4L equipped vehicles will have a maximum towing capacity of 3500 lbs/350 lb tongue weight. 2.5L equipped vehicles will have a lower capacity, at 2700 lbs towing/270 lbs tongue weight. The capacity of the Curt 13494 Class III hitch which we offer as # C67JR is 4000 lb towing/600 lbs tongue weight, which is actually greater than the capacity of the vehicle. Because you'll want to abide...
  view full answer...
• Hitch and Towing Equipment Recommendation for 2013 Toyota Highlander
  The trailer hitch I recommend for your 2013 Toyota Highlander is the Draw-Tite Class III Max Frame Hitch # 75726. This hitch offers a 2 inch receiver opening to accept a wide variety of hitch and towing accessories. You will want to check your owner's manual so as to not exceed your Highlander's towing capacity, but this hitch has a towing capacity of up to 5000 pounds with a tongue weight capacity up to 750 pounds. I've linked an installation video of this hitch on a Highlander for you....
  view full answer...
• Wiring Needed for 2012 Jeep Grand Cherokee to Power Trailer Brake Lights and Turn Signals
  The Draw-Tite Class III Receiver Hitch, # 75699, is a great option for your 2012 Jeep Grand Cherokee. The T-One Vehicle Wiring Harness with Trailer Connector, # 118425, is the wiring that you will need to operate brake lights and turn signals on a trailer. This connector plugs directly into the existing wiring with no cutting or splicing needed. We also offer the Ball Mount, # C45010, 2-inch Hitch Ball, # 63845, or the 1-7/8 inch Hitch Ball, # 19260, that you may need to get you ready...
  view full answer...
• Trailer Hitch Instructions, Ball Mount, Ball and Wiring Recommendations for a 2008 Toyota 4Runner
  I can certainly provide the link for Curt Trailer hitch, # 13445, installation instructions for your 2008 Toyota 4Runner. To complete your towing set up the recommended ball mount is # C45010 for use with ball # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 63847 (2-5/16 inch diameter). For wiring, you would need Upgraded Circuit Protected Taillight Converter Hardwire Kit, # 119178KIT. I have included a link to a video showing a typical installation of this wiring harness...
  view full answer...
• Hitch Recommendation for a 2011 BMW X5 35D
  Yes, the Curt Trailer Hitch for the BMW X5, 2011, part # 13077, will work on your 2011 X5 35D. I attached installation instructions below for you to check out also. You may also be interested in purchasing the following products also. Ball Mount 3/4 inch Rise or 2 inch Drop, 7,500 lbs, part # C45010 Hitch Ball with 1-7/8 inch Diameter and Medium Shank, 2,000 lbs GTW - Chrome, part # 19260 Hitch Ball with 2 inch Diameter and Medium Shank, 6,000 lbs GTW - Chrome, part # 19247
  view full answer...
• Availability of Trailer Wiring Harness for 2013 BMW X6
  According to Tekonsha the # 119250KIT which was a fit for the 2013 BMW X5 would be compatible with your 2013 X6. I've confirmed this with my contact at Tekonsha. I've linked you to an install video showing the wiring harness being installed on a 2013 BMW X5 and a 2012 BMW X6. The procedure for your X6 would be similar. To complete your towing set-up, you might need the following: Ball mount, part # C45010 1-7/8 inch trailer ball, part # 19260 2 inch trailer ball, part # 63845 (The coupler...
  view full answer...
• Best Hitch Recommendation for a 2006 Toyota Tacoma
  All of the hitches we offer that are confirmed to fit your 2006 Toyota Tacoma with a regular cab would work great, but the hitch we offer that has the most positive reviews and is the most inexpensive is the Curt Hitch part # 13323. I would highly recommend it for you because of that. I attached an install video for you to check out as well. To wire your vehicle for towing, you would be able to use custom-fit Tow Ready wiring harness # 118496. To equip your Tacoma for towing a trailer,...
  view full answer...
• Can I Retain My Spare Tire if I Install a Curt Hitch # 13138
  Yes, you can use this hitch on your 2001 Ford Ranger and still retain your factory spare tire mount. I attached installation instructions for this product below. You may also be interested in purchasing: Ball Mount 3/4 inch Rise or 2 inch Drop, part # C45010 Hitch Ball with 2 inch Diameter and Medium Shank, part # 19247 Hitch Ball with 1-7/8 Diameter and Medium Shank, part # 19260 Tow Ready Custom Fit Vehicle Wiring, part # 118344 (installation instructions are linked below)
  view full answer...
• Hitch Recommendation for a 2008 Subaru Outback XT
  It sounds like your 2008 Subaru Outback XT is not a Sport so you would be able to use this Draw-Tite Trailer Hitch, part # 75560. I attached installation instructions as well as a video of this hitch being installed onto a similar Outback as yours below. You may also be interested in purchasing the following: Ball Mount 3/4 inch Rise or 2 inch Drop, part # C45010 Hitch Ball with 2 inch Diameter and Medium Shank, part # 19247 Hitch Ball with 1-7/8 inch Diameter and Medium Shank, part...
  view full answer...
• Does Trailer Hitch and Wiring Communicate With the Engine and Transmission on Volvo XC 90
  Your Volvo XC90 will require the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, item # 118411. This wiring harness will protect your vehicle's sensitive wiring and computers from electrical shorts and mis-wired trailers. There is no wiring harness for trailer towing that communicates with the vehicle engine or transmission. The trailer wiring cannot communicate trailer weight or any other information to the vehicle. Your vehicle powertrain control module (PCM computer) senses...
  view full answer...
• Trailer Hitch and Towing Equipment Recommended for 2022 Toyota Highlander XSE
  I'd be happy to help with that. I'd recommend the Curt Class III hitch, part # e75ZR which is a fit for all models of the 2022 Toyota Highlander, including the XSE models. To equip the vehicle for towing, you'll need a trailer wiring harness like # TK99FR, a ball mount like # C45010 with a pin and clip # PC3 and a trailer ball like # 19260 for a 1-7/8 or # 63845 for a 2 inch ball. You can see video footage of the install of the hitch and wiring harness by using the provided links.
  view full answer...
• Recommendation For A Tow Hitch That Fits 2014 Jeep Latitude
  The etrailer class III hitch # e73ZR is a fit for your 2014 Jeep Latitude. This Class III hitch has a maximum gross trailer weight of 5,000 pounds and a tongue weight of 500 pounds. I recommend you review your Cherokee owner's manual to verify your vehicle's weight/towing capacities, which may differ from those for the hitch. If different, the lower of the two becomes the overall limit for the system. The recommended wiring for your hitch is # 118605. The recommended ball mount is #...
  view full answer...
• Trailer Hitch and Towing Equipment Recommendation for 2019 Toyota Highlander
  Although there are several different hitches available for your 2019 Highlander, the most popular and most often recommended are those with the concealed crossbars like the Curt Class III, part # C13394. The # DT65MR is also a fit for all models, but the hitch is designed differently so that just about the entire hitch is visible below the back bumper. If you don't mind the hitch being visible, it'd be a perfect choice plus it's also easier to install. If you'll be using the hitch for...
  view full answer...
• Availability of a Vertical Receiver Hitch for a 2014 Volvo XC 90
  The Curt vertical receiver adapter, part # C45013 is designed to work only with the Curt Stealth Hitch, but it might possibly work with other vertical receivers. We currently don't offer a vertical hitch receiver, only an adapter. The crucial dimension will be distance from the center of the hitch pin hole on the vertical tube to the end of the receiver. If this distance is more than 7/8 of an inch, the Curt adapter # C45013 will not work for you. See the diagram to the right. If you...
  view full answer...
  
• Hitch Recommendations for 2011 Mercedes Benz ML350 BlueTec
  The Curt Class III receiver hitch, part # C13102 would be the correct fit for your 2011 Mercedes-Benz ML350 BlueTec. I've confirmed with Cequent Performance Products that their Curt # 13342 is NOT a fit for 2010 to Present BlueTec models. If you'll be towing with your hitch, you might also be interested in the following: Trailer wiring harness with 4-pole trailer wiring harness, part # 119250KIT Ball mount, part # C45010 1-7/8 inch hitch ball, part # 19260 2 inch hitch ball, part #...
  view full answer...
• Hitch Recommendation for a 2015 Chevy Colrado
  The Curt Hitch part # C13176 that you referenced has been confirmed to fit your 2015 Chevy Colorado so I would recommend it for you. You might need the following to complete your towing system: 4-pole/7-way Trailer Connector, part # HM40975 Ball mount, part # C45010 1-7/8 inch trailer ball, part # 19260 2 inch trailer ball, part # 63845 Locking hitch pin, part # e98882
  view full answer...
• Trailer Hitch Recommendation for a 2005 Honda Pilot
  I would recommend either the Curt Class 3 Trailer Hitch, item # 13328, or the Draw-Tite Class 3 Trailer Hitch, item # 75599, for your 2005 Honda Pilot, these are both custom designed hitches for your vehicle. For trailer wiring I would recommend the Plug-N-Tow (TM) Vehicle Wiring Harness with 4 Pole Flat Trailer Connector, item # 43105. This harness provides up to 8 amps maximum taillight load for trailers with extra lights. Listed below are some other items you may need to complete...
  view full answer...
• Hitch Ball Recommendation for 2007 Ford Ranger with Factory Bumper
  I cannot make a accurate recommendation without more information. The thickness of the bumper at the hitch ball hole and the diameter of the hole in the bumper for mounting the hitch ball will allow me to make a recommendation that will work with the bumper of your 2007 Ford Ranger. We have 2 inch hitch balls with 3/4 inch shanks up to 3-3/8 inches long and 1 inch shanks up to 3-3/16 inches long (see link). I am sure we have a ball that will work with your bumper. If you are planning...
  view full answer...
• Hitch for a 1999 Jeep Grand Cherokee That Does Not Intefere with Spare Tire
  If you're planning on purchasing a used hitch, be sure to examine it carefully. If the paint is cracked anyhere on the hitch, it could be an indication that the hitch has been damaged or bent. Make sure there isn't excessive corrosion. Surface rust is okay, but if it's eating through the hitch I'd recommend passing on it. The hardware used to attach the hitch to the vehicle is considered a one-time use item only. If the bolts are torqued more than once, they can stretch which weakens them. We...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?