The Adapter for Extended D-Ring Bumper Mounts to Roadmaster Tow Bars # RM65FR is only compatible with Roadmaster tow bars like the Falcon 2 # RM-520. There are no D-ring adapters available for the etrailer SD Non-Binding Tow Bar # e34ZR. The Falcon 2 would work well for your application, and would also require safety cables like # RM-643 since they are not included.
Also, make sure you verify that your bumper is rated for flat towing. Even though you have D-ring attachments, it is possible... view full answer...
Thanks for the photo!
It looks like your 2013 Jeep Wrangler has a standard bumper from the factory so you'll need the Roadmaster Crossbar-Style Base Plate Kit # RM-521448-4 to fit with your Roadmaster StowMaster Tow Bar # RM-501.
I've attached an installation video of this base plate kit on a 2013 Wrangler for you to check out as well! view full answer...
Yes, the BOLT Trailer Coupler Lock # BL7032493 will fit with a Demco 2-5/16" trailer coupler. I have included an image below showing the lock used on a Demco coupler so you can see the fit with that style coupler. view full answer...
The frame brackets for the base rails are different between a 2017 F-250 and 2015 F-350 so the only component of your base rail kit you could possibly reuse would be just the outboard rails. That being said not all rails will match all brackets so you could run into fitment issues if you purchase just new brackets and try to reuse the outboard rails. The hardware could've also changed between the models as well so it's best to just get a whole new kit just to ensure you have everything... view full answer...
Since we know your Grand Design Reflection 150 Series 298BH has a Lippert 1621 pin box the Reese Goose Box part # RP85FR would fit and work great. view full answer...
Thanks for that photo, I do appreciate it. And all of the couplers we have - and indeed all the ones I am aware of - require a frame that is fully engaged. While Demco was not able to provide a dimensional drawing, we did measure the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95.
As you can see it is 17-5/8" long in total, and 8-5/8" behind where the actual coupler portion is. view full answer...
Yes, you can use the etrailer Trailer Hitch Receiver # e83ZR 2023 Subaru Forester. This is a fit for the 2022 model and according to my research this is the same generation as your 2023 so they will be compatible with each other!
Attached is an installation video of this hitch on a 2021 Forester for you to check out. If you let me know what you plan on using the trailer hitch for I'd be happy to make an additional recommendation for you! view full answer...
I do have an option for you but we don't offer any inner tube square gooseneck couplers which measure 3-1/2" x 3-1/2" as this is not a standard size. That said, what you can do is install a new outer tube and inner tube of the standard size 4" x 4" to upgrade the coupler. I recommend the Ram Gooseneck Coupler part # GCSQ-25008 which has a 25,000 lb rating. view full answer...
Demco does make an adapter to go from the OEM prep package of your 2016 Ram 2500 to a set of rails that your hitch would fit with the Demco # DM6099. This fits the versions of the Hijacker that fit above bed rails like the part # DM8550035. Or if you wanted a solution that would allow your hitch to attach directly to the pucks you could swap the mounting hardware with the kit part # DM99GV. view full answer...
We do indeed carry B&W, and have the Turnoverball gooseneck for your 2022 Ram 2500; I verified with B&W the correct fit is the following part number:
- B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320
You made a superb choice as the Turnoverball is the single best gooseneck hitch in the industry due to its heavy-duty construction and hitch ball that mounts in a square base, which ensures stability between the ball and coupler.
The only other thing you will need (if you... view full answer...
You can go to LED lights on your 2017 Grand Design Imagine 2600RB, but we don't have any way of knowing what lights are currently on your trailer, so you'll just need to do some measuring to determine what will work.
For example, the Low Profile LED RV Tail Light w/ License Bracket - Driver Side # RVSTLB61 and Passenger Side # RVSTLB60 measure 8-11/16" long x 3-3/16" wide x 2-1/8" deep and are surface-mounted lights.
If yours are of similar measurements you can use them as replacements.... view full answer...
For your 2023 Ford F-150 you will need the Replacement OEM BOLT Lock # EX84VJ to fit your Extang EnCore Hard Tonneau Covers. The Lock you found is only for the 2015-2020 F-150's. view full answer...
You will need the Firestone Ride-Rite Air Helper Springs # F2558 for your 2016 Nissan Frontier. You will not need any spacers as the Rough Country 2.5" leveling kit only provides lift to the front suspension.
The Air Lift WirelessAIR Compressor System # AL58WQ will allow you to control the air pressure with your smart phone and the Air Lift app. The smart manifold will monitor the air pressure while you drive and make adjustments to the air pressure if it changes by more than 3psi. It... view full answer...
WeatherTech currently only carries a tailgate liner for a 2022 Nissan Frontier with a 6' bed so the only other option I currently have is the Access Custom Truck Bed Mat # A45BG. This half inch thick carpet easily snaps in and out of place so that you can protect your bed or pull the mat out to clean it.
WeatherTech does carry a tailgate liner # WT42XQ if you're looking for tailgate protection as well. view full answer...
Before you start taking anything apart you'll want to test the power and ground connections to ensure that the vent # MA00-7500K has what it needs to properly operate. If your vent has a bad ground it can cause it to act strangely and if it's not receiving a full 12 volts then it could complete some functions (opening and closing) while others won't work.
To test the motor # MA10-20968 you would need to remove it and cut off the connector (with enough wire to splice it back on) to put... view full answer...
In my experience, most Toyota Highlander's don't have the factory tow package and need both the trailer connector and converter like what comes with the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # HM11141845. If you did in fact have the factory tow package, you would simply only use the trailer connector as there would already be a harness plugged into the spot for the converter. If you want, you can use the install instructions for this product... view full answer...
I have a few options for you to help with identifying the bearings on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the bearings based off industry standards. For example, a 3,500 lb axle uses L68149 and L44649 bearings like what comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part # BK2-100. The other option would be to take the hubs... view full answer...
The Go Power Portable Solar Panel with Digital Solar Controller - 200 Watt Solar Panel part # 34282610 accepts Anderson style connectors so if your solar generator only takes MC4 connectors you can use the Anderson to MC4 Cable for Redarc Solar Panels part # RED33VR to connect them. view full answer...
Yes, there is a single trailer hitch receiver that fits your 2020 Chevy Bolt EV that has the necessary tongue weight capacity to carry 125 lbs of accessories. The hitch is from EcoHitch, and is the following part number:
- EcoHitch Hidden Trailer Hitch Receiver # 306-X7359
The EcoHitch # 306-X7359 has a 300 lb tongue weight capacity, and is the only hitch that fits your Bolt which has a capacity of over 100 lbs, which is why it's the only option for the amount of weight you are looking... view full answer...