Based on the information I could find on your 2011 Freightliner M2 cab and chassis it appears you have a 34" wide frame. The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper # 3371809050 is specifically designed to fit a 34" wide frame. It has bolt hole which you can use to attach to your frame but welding is also required. You are able to bolt on either a 2" Receiver # 3371804055 or Pintle Hitch w/ 2-5/16" Ball # BP38FR.
For tail lights I recommend the LED Combination Tail Lights... view full answer...
If you plan to leave you chassis exposed and not put a bed on your 2011 Freightliner M2 cab and chassis the Buyers Products 42" x 13-1/2" Gooseneck Hitch Plate # 3373014981 is going to be your best option. This is recommended to be welded to your frame rails.
If you plan on adding a type of bed/flatbed the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1500 is going to be your best option. This will allow you to remove the hitch ball when you need to use your bed and replace... view full answer...
The Gen-Y Adjustable Ball Mount part # 325-GH-1723 does fit the 3 inch hitch size of your 2014 Dynamax DX3. Based on the weight and towing capacity of your RV you would not need weight distribution for your trailer. view full answer...
I recommend using a Solera Destination Manual RV Awning kit Item # LCV000335274-334719. This is a 20' wide awning that comes with everything to get it installed. The canopy extends out 9.8'. Each arm is spring assisted to ease rolling out the canopy. The fabric is a 13.5-oz vinyl that won't crack or fade. The awning kit also comes with an aluminum canopy shield to protect the canopy when it is rolled up. view full answer...
Heavy duty semi tractors like the International Prostar don't typically use standard OBDII ports. Therefore, in order to use the Tuson DirecLink Base Model Trailer Brake Controller part # 335DL-100 you'll need an adapter like the Tuson Heavy Duty Truck Module Kit for DirecLink Brake Controller; part # 335HDCON-6PIN for 6-pin or part # 335HDCON-9PIN for 9-pin. view full answer...
There are helper spring options for your 2008 Tiffin built on the Freightliner FRED Chassis with a 26000lb GVWR.
For the front you will need the SumoSprings Solo Custom Helper Springs - Front Axle # SSF-501-40, and for the rear you will need the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-502-54.
These helper springs will help to minimize sway and support the front and rear suspension of your motorhome.
I included videos for each of the products mentioned for you to take... view full answer...
On the Allison transmissions you would need to go to a larger hose and fittings to avoid any problems when using a transmission cooler such as # D13403. But what I recommend is to use core # D54012 which does have -12AN fittings already. The largest inner diameter hose we have is 1/2 inch such as # D15799 so if you do need larger hose it would need to be obtained locally. view full answer...
I verified with my contact at Curt that as long as your 2002 Freightliner Sprinter is the single rear wheel model the Curt Class IV Trailer Hitch Receiver # 14250 will work for you. view full answer...
There is indeed a steering stabilizer fit for your motorhome on the 2022 Freightliner XC-Series chassis with V-Ride. The stabilizer is from Roadmaster, and is the following part:
- Roadmaster Exact Center Steering Stabilizer # RM53RR view full answer...
Yes, the thermostat of the Atwood Air Command part # AT15032-22 that you referenced does include furnace controls like you are wanting. view full answer...
Before choosing a set of tire chains for your 2016 Freightliner Sprinter 2500 you will want to review the snow chains section of your owner's manual for any restrictions or compatible issues. I have summarized a few key points for you below.
- Mount snow chains only in pairs and only to the rear wheels. On vehicles with twin tires, mount the snow chains to the outer wheels.
- Activate all-wheel drive before driving off with snow chains (If equipped).
The Titan Chains Mud Service Snow... view full answer...
I checked with SuperSprings (the manufacturer of SumoSprings) and can verify the following are indeed a fit for your Tiffin Allegro Open Road built on a 2008 Freightliner FRED chassis:
- Front Axle: SumoSprings Solo Custom Helper Springs # SSF-501-40
- Rear Axle: SumoSprings Solo Custom Helper Springs # SSR-502-54
These are going to do a superb job of helping with sway, giving you a smoother ride, and improving handling. Each of the springs works independently which is what is going... view full answer...
While not custom fit for your 2018 Freightliner M2 the WeatherTech Roll Up SunShade Kit # WT87QV that you referenced would fit as it's a universal fit setup designed to fit vehicles like yours. view full answer...
For your 2022 Winnebago Forza 38F on a Freightliner XC-Series Chassis you'll need the Roadmaster Reflex Steering Stabilizer for Class A Motor Homes # RM-RSSA along with the Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer # RM-RBK18. I've attached a video below where Shane will go through the installation process to give you a better idea of the process (keep in mind that your brackets are different so the installation may differ a bit).
You can also upgrade/add on anti-sway... view full answer...
If your motorhome has the air suspension, solid front axle and is not equipped with the 150 gallon fuel tank, the RM-RBK14-RSSA steering stabilizer you mention is the correct part for your application.
Keeping the steering wheel centered and fighting cross-winds is exactly what the stabilizer is designed for, and if it is a fit for your motorhome, it should work very well for you.
You can certainly adjust your tire pressures if you care to, I am a firm believer in checking for the simple... view full answer...
RoadMaster Stop Light Switch Kit # RM-751452 is a custom-fit product designed for applications on the 2007 through 2014 Jeep Wrangler and Wrangler Unlimited. For your 2013 Freightliner Springter 2500 you can use their Universal Stop Light Switch Kit # RM-751000. view full answer...
The Tekonsha Plug-In Wiring Adapter # 3027-P or 3027 are actually the same but they are only confirmed to fit 2004 - 2016 Freightliner, XC Chassis. To install your Prodigy P2 # 90885 you'll need to splice the connections using a universal pigtail like # 7894 since there isn't a plug and play connector option for the 2017 or newer Freighliners.
Another option would be to use the Curt Echo brake controller # C51180, instead. This mobile brake controller does not require you to test or splice... view full answer...
The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise # RM-077-8 was designed for exactly this purpose. The 8" rise will allow you to mount a bike rack up higher than your vehicle, providing plenty of clearance between a bike rack and the flat towed vehicle. view full answer...
The coupler lock that is part of the Master Lock Universal Keyed Alike Trailer Towing Lock Set, # 3794DAT, is a universal fit coupler lock designed to fit most couplers. It fits 1-7/8 inch, 2 inch, and 2-5/16 inch couplers. I have included a video review of just the coupler lock below.
The Hitch Lock fits both 1-1/4 inch and 2 inch trailer hitch receivers and the coupler latch lock will fit latches up to 2 inches wide with a 1/4 inch or less hole diameter. I have included a link below... view full answer...
The Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand - Qty 2 # 288-07411-2 aren't rated for weight capacity and torque. They are simply used to help with traction in a recovery situations. It will work well for your Renegade Verona Le. view full answer...