To install the heat strip # ACMHD you would need to replace the entire system with all Advent Air equipment in order for it to work. With the # ACCAR135 being just a replacement rooftop unit it wouldn't be able to communicate with the heat strip and function properly.
Replacing your Carrier Air unit is going to be fairly easy, but you'll want a few extra hands to help move the units around and you won't want to drag them across the roof of your RV. You'll start by removing the cover of... view full answer...
It's not uncommon for the Timbren Kit for Trailers part # TTRA1032 to be partially engaged once installed. I would not recommend cutting the spring down but you might verify your leaf springs are in good shape and that they aren't being overloaded. view full answer...
Since you're current axles are rated for 7,200 lbs you will be needing the Replacement #20 Rubber Shear Spring # MR79UR as it is designed for axle ratings in the range of 6,501 and 7,500 lbs. You can verify this by looking for a "20" printed into the rubber.
When it comes to replacement leaf springs and equalizers we need to know the length of your leaf springs when unloaded (center eye to center eye) as well as the distances between the bolt holes of your equalizers to get you the correct... view full answer...
Yes, an Over Under kit like the part # K71-385-00 which fits 3 inch axles can be used with a MORryde SRE system without any issues. view full answer...