Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Galvanized idler hub assembly is great for marine use. Trailer hub fits 2,200-lb idler axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and galvanized lug nuts included.
Features:
Specs:
Note: Some axles rated at 2,200 lbs require a different seal and bearings. Be sure that the bearings in the hub being replaced have L44649 stamped on them. If the bearings have L44643 stamped on them, use 34822545BX trailer hub.
Note: Trailer wheels that are smaller than 15" and have 5 bolts, have a 5 on 4-1/2" bolt pattern.
Bearing, Race, and Seal Information
This trailer hub assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer. All GAL-DEX hubs undergo a test in which they are sprayed with a 5-percent salt solution to determine corrosion resistance over time. These products are able to withstand 500 hours of constant exposure to the saltwater mist. This 500-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (25 Customer Reviews)
Galvanized idler hub assembly is great for marine use. Trailer hub fits 2,200-lb idler axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and galvanized lug nuts included.
Worked just fine, like everything else I have bought from you folks. Your product knowledge when needed is always helpful too.
I have not yet installed them but have unpacked and took measurements. The only issue I have is the grease seal ID is .25 to large but that is most likely my fault during the order, I have the right size grease seals coming.
The hub is solid and the bearings fit real nice, no slop. This is for a boat trailer which goes back and forth to a very rural camp so it gets bounced around a lot, time will tell how these hold up. The original hub and bearings are ok and will be my field spare should I need it, slip one hub off and the other on, tighten and go. I like the stud with lug nut to hold the rim rather than original bolt into the hub, easier for tire mounting and I can put a locking lug nut on as well, personal preference.
This seemed to be the most cost effective means, all one package, just watch the size of the individual parts to make sure you get all the parts the correct size.
etrailer.com packed the parts well, nothing flopping around or damaged.
No complaints, now the dirty part, replacing the old with new.
Just what I needed to replace the original worn out hubs on my small trailer. Parts arrived quickly in great condition and were a direct replacement. These hubs are actually better than the original hubs, they are galvanized not painted and will better protect from rusting, they also came with 1/2-20 threaded studs compared with threaded bolts on the original hubs. The idler hubs also came with all the required components to repair my small trailer.
These are very well constructed and etrailer does a good job at putting together a kit that contains everything you need. You will have to keep though your old washer, nut, and pin.
Make sure you are ordering not only the right size of bearings, but also the grease seal. Some not-so-standard hubs have mismatched seal sizes. Measure your spindle and your seal seat. If your spindle is larger in diameter than the 1” (1.058”) this is the right kit for you. But also measure your seal seat. This kit shipped with a seal that fits a seat that’s 1.5” in diameter. If
Yours is closer to 1 ¼” you are going to need a different seal. etrailer quickly rushed out those for me!
I received my hubs last week, shipping was nice and fast, and I installed them over the weekend. Kits were complete and everything fit perfectly. The only negative comment I would make is that the hubs do not look like they do in the video or picture. Instead of a "round" shape hub, they are a "star" shape hub, which made me think I had received the wrong ones. Once I pulled off my old ones and checked all the measurements I realized the difference between the two was purely cosmetic.
Very happy!
Bought new hubs/bearings for my Shorelandr boat trailer. Ricky in customer service was most patient helping me pick the proper parts. Got the hubs Monday am, installed them Monday afternoon, piece of cake!
Order was reprocessed to be returned to sender because the wrong street was on the box. I had to go and make calls after calls to finally sto the return
When I called the guy on etrailers end was so rude on the phone telling me sure uts 3:30 in the afternoon I do t have time for this it's time for me to go hom and then hung up.
Fit perfectly, only had to buy a set of grease seals as my Hobie trailer had smaller hubs (1 1/4 vs the 1 1/2") that would not be compatible with the grease seals provided
Fit perfectly, only had to buy a set of grease seals as my Hobie trailer had smaller hubs (1 1/4 vs the 1 1/2") that would not be compatible with the grease seals provided
After the first parts got lost in the mail e trailer expedited shipping to gut us new parts in a very timely manner. Parts worked great!
Hubs used on ssnowmobile trailer. Held up well through winter #1. Galv coating still looks good.
Purchased a hub assembly for a trailer and a wheel and rim. Excellent quality products and very rapid delivery. Very good product info on the website
This worked great on our boat trailer
High quality parts, exact fit. Great value product that arrived quickly and installed easily. Bought these for a new to me pontoon trailer.
Extremely fast arrival. Great to know I can get trailer parts at a great value.
Product as described attentive customer service
Kit was quality and functioned properly, no problems as of 1 year later.
One hub on, one hub to go!! Really nice quality....from a great e-retailer!!
Very responsive would definitely order again!!
Great products and prices. Very fast shipping. But best of all, incredible instructional videos.
Quick delivery and great customer service. Have yet to install, but quality looks good.
Excellent product. Fast shipping . Will do business again
Fast shipping prompt service great product and company
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gary B.
7/15/2018
Still on the trailer and working out well. I have put some hard miles on them and they seem to be holding up. Just shot some grease in them before the next trip.