Replacement Hubs/Wheel Studs/Bearings Races for Triton Triton XT14-101-1 Trailer
Question:
Hi, Im trying to find parts for a trailer wheels studs or possibly complete hub assembly. Im not sure how to find the right parts. The trailer info is Triton XT14-101-1 Date 03/06 Vin 4TCSS114X6H224173 GVWR 2995# GAWR 2200# Tire 20.5 x 10E Rim 10 x 6.00 The axle has Dexter and the numbers 69-47 stamped on the end. Thanks!
asked by: Drew M
Expert Reply:
In order to spec the correct replacement wheel studs, I'd need the dimensions from one of your existing wheel studs, as shown in the provided diagram.
I spoke with the nice folks at Triton Trailers to find the specifics about your existing hubs. For a replacement hub, I'd recommend part # 8-259-50UC1 which is compatible with a 2200 lb axle. The hub has a galvanized finish to resist corrosion, and includes the inner and outer L44649 wheel bearing, and has the L44610 races pre-installed. The grease seal, dust caps and lug nuts are included.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-3/4 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: How to Select Replacement Grease Seals for Tandem Axle Snowmobile Trailer
- Q&A: How to Determine if Trailer Hub # 8-259-50UC1-EZ Fits 2001 Triton XT Trailer
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-259-50UC1 Review
- Shop: Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,200 lbs
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: Grease Seal
- Shop: Timken Grease Seal - Single Lip - I.D. 1.250" / O.D. 1.983" - 203029
- Shop: Timken Grease Seal - Single Lip - I.D. 1.500" / O.D. 2.332" - 203013
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement Bearing Kit Needed for a 10ft 1995 Triton Lite Trailer
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Most Popular Wheel Bearings
- Search Results: 68149
- Shop: Trailer Wiring
- Q&A: Recommended Dexter Suspension Kit 7753400
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: dust cap
- Q&A: Options for Adding Interior Lighting to Enclosed Cargo Trailer
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Brake Controller