Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately
Complete Towing Package for 2004
Customers Who Purchased This Trailer Hitch Also Bought...
Popular Trailer Hitch Accessories
Average Customer Rating: 4.8 out of 5 stars (357 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Excellent product experience. No issues with delivery. Easy self-install. Very sturdy and holding up well after 1 year so far.
It’s the 1 year anniversary of my hitch apparently! This bad boy has been used exclusively to carry a hitch mounted 3 bike carrier on my CR-V, and it’s done a great job at that. My bikes are bae and they’ve been safe and secure alllll over the country the past year. I also fondly recall the easy install: Only took about 45 minutes, a beer, and a ( now ex-) boyfriend to help hold up one side . Didn’t get surprised by needing any specialty tools or anything, just what I already had in my standard box. 10/10.
I rarely give a 5-star rating. However, in this case it's necessary! I attempted to install my new etrailer Hitch Receiver but eventually discovered the mounting holes did not align due to shipping damage. I called the customer service group and rather than doubt my story, they immediately shipped me a new part AND sent a shipping label for the bad one! The new receiver went in easy-peezy just like the one I did years before on a different vehicle. Well done to the folks at etrailer.com
This hitch was exactly as advertised and fit my CRV perfectly!!! Used spray bottle with soap & water to lube the two upper muffler rear hangers and they slid off with little prying needed (did not need to remove the lower hanger in front of muffler). etrailer's installation videos for installing both this hitch and corresponding 118336 wiring harness were spot-on and very helpful (also a good video on the Curt website). Took my time tightening the hitch bolts to specs which was a bit awkward until I thought to use my ratchet extension bars. Maybe the easiest "car repair" I've ever done, and probably saved a lot of $$$ doing it myself. If you can change your oil, you can do this installation no problem!
Also, etrailer promptly shipped this product for free (thanks, guys!) and it got here a day early. GREAT COMPANY! When I save up enough to buy roof rack rails in the near future, I'll be back...
I was happy that the package arrived a day earlier then expected, although the box was damaged all the part were there and nothing inside was damaged. the directions were clear and concise with with minor help from a friend and a scissor jack the install was fairly quick easy.The only down side was there wasn't an invoice with the package and the wiring harness didn't include directions to run the wiring to the outside of the vehicle.
Great hitch! Easy to install and has held up great over the last year. I use it quite often to tow my 4 wheeler and tractor. Great price for a well made hitch. I would highly recommend to anyone looking for a great hitch.
This hitch was a nice addition to my 2006 Honda CRV - it fit perfectly and I was able to install myself, saving me approx 150.00. The videos were the perfect teaching aid for the hitch and the wiring I installed, they left no questions unanswered and are very well done. I was mindful not to push the bolts back up into the holes while raising up the hitch, the center U support was a perfect help, as was resting the hitch on the muffler and getting started on the drivers side. The install came off as well as I could expect and am very satisfied with the fit and finish of this hitch. I highly recommend this hitch - I would recommend having two people to install - it would just make it easier.
Great product. Excellent powder coated finish.
Installation was fairly easy. I thought I might need a lift but had no problem working under my car on my garage floor. I drove the back wheels up onto some pieces of 2 x 8 scrap wood, which gave me enough clearance. You will definitely need a helper to hold it up while you get the bolts lined up.
I had to get the hitch because I have a rescue dog named Toby, who takes up most of the back end of my 2006 Honda CRV. I have a utility trailer now to make runs to the home center or carry stuff on trips.
2003 CR-V install went well. First, watch the installation video! Be sure and lubricate the rubber hangars. Then you can remove and install by hand. Follow the Curt instructions for order of install. I forgot the u-bolt and it won't fit after the 4 frame bolts and nuts are installed. A second set of hands really helps. We used a needle nose pliers to hold the bolts while screwing on the nuts. There was interference between back passenger bolt and the muffler upon re-install, so I used a 13/16" box wrench to bend the back right muffler hangar up about 1/4". Problem solved! To reduce long term rust, I painted the exposed nuts and bolt ends with a rust resistant paint.
Wow is all I can say! Talk about an easy project. My boyfriend is a mechanic and he told me we would be done in 20 minutes installing and that was right on. So easy ! Honestly I couldn’t believe it. I bought the wiring harness from this company as well and I installed that portion myself. Watched the video that is posted online from etrailer which took no more than 3 minutes and did it all in less than 20 minutes. Super excited to get my jet ski home ! Thank you for an easy to install product with perfect directions online!
Having towed with this for a year, I can say that the build quality is excellent, and well designed. The catch is that the bolts that are used to secure the hitch to the frame ride so close to the exhaust (more precisely, the heat shield on the top side of the muffler) that is can create a very loud and annoying rattle on dirt roads and at certain resonant frequencies at highway use. I have tried many work arounds (bending hangers, installing bump stops, ect), and I believe the only true solution is to get a new muffler installed that is fractionally lower to avoid the vibration.
Just installed the hitch today. I ordered it on Thursday morning and arrived about 2pm on the following Tuesday. Got a call from the company saying my harness wasn’t instock and offered to either order an altenative or just wait for the originally oreded to be in stock; never had customer service like that before!
Wasn’t too bad to install. Without the harness install, prob took me about 30-45mins. Only issue i had was using the wires on the bolts ‘cause they wouldnt actually thread on, but was anle to minipulate them so it worked. Can’t wait to use it!
Super easy to install, took 30 min to the video was super helpful. It looks good on my car as well, the only problem I have is it's a little to big for my bike rack even though it said it was a 2 in I feel it's a little bigger but it works great!
Currently use it every day with a bike carrier. Works great and the finish is holding up very well too.
Installation took about 45 minutes. Completed it by myself, unhooking the 3 rubber exhaust hangers lowers muffler just enough to get to rail for installation,
Easy install after watching video instructions. Just needed my 11/16 and 9/16 wrenches and took about 15-20 min total. This model sticks out farther than the "hidden" ones but will afford better tie down points for boats/ etc. Great service, fast shipping, and trusted products.
Hi,
This is very usefull to me because im using for my bike rack daily??
Ordered on Saturday and recieved my hitch on Tuesday. Mounting was easier than expected. Look's great. It was very well packed and for once I didn't have to go buy anything to complete insulation. I would highly recommend.
Was easy to install after watching the videos. The fish wire was a really helpful trick! Fit perfectly on my 2003 CRV
Came as described. Put it on myself. Was a little tough but I’m sure with a helping hand and a lift it’ll be way easier
I had help from a family member to instal but we figured it out with ease and installed in less than an hour. I use this hitch to mount a bike rack and it works perfectly.
Great product.
I watched the video, took it out of the box and it was installed within about an hour.
Installation was as easy as shown in the video (2006 CR-V). I did all the work from the floor without lifting the vehicle.
I soaped the rubber grommets with a spray bottle to get the muffler off - pretty easy (I only removed the two near the muffler).
The only help I needed was my wife helped hold up the hitch for the initial bolt-up - no problems at all.
Fit and finish are outstanding.
I also got a Thule 934XTR hitch mount bike rack, received a the same time, which was also easy to assemble, and fit the hitch very well.
I highly recommend this product and this company.
Thanks,
Chris W
I can only speak to the process of assembling it to my 2005 CR-V as I haven't pulled anything with it yet, but I don't anticipate any issues. I am writing about the DIY aspect of the hitch because that was the main concern I had in buying it...It was pretty easy. Assembly was easy and straightforward. The videos posted on the website for my make and model of vehicle were particularly helpful and made the process go even smoother. Attaching the hitch receiver to your vehicle is very much a doable DIY project. They provided the fishing tools that are required to get the bolts into place. I thought it might be one of those "looks easier on a youtube video" type deals where you need to know some silly trick to do it easy, but that wasn't the case. I recommend that you use a car jack as I think it would've considerably more inconvenient if I didn't have one. The hitch looks great, I plan on using it to tow a small trailer from here to there.
Jonny C.
9/24/2017
Hitch still working great. Ive used it to tow a small trailer with lights from here to there on the highway and interstate multiple times. Havent had any problems.
Super product! It arrived well packaged, all necessary (quality) hardware, and easy to read, clear instructions. I work in a body shop so I install and uninstall hitches on many different makes of vehicles regularly and this is one of the easiest ever. Start to complete from opening the box to backing up and hooking on to the trailer was less than 2 hours (wiring took an additional 30-45 mins). Would definitely recommend this hitch; and will definitely buy from etrailer again. Quick, easy transaction with super fast shipping!
Cory
2/17/2019
One year down, still pulls and functions great. No issues, no regrets. Five star product and Five star customer service! Hitch will probably outlast the vehicle but the next vehicle will be fitted with a hitch from etrailer as soon as I purchase it.
Ordered my Curt trailer hitch on Nov. 16 and received it on Nov.18. A dealer wanted to charge me $360. plus tax for material and installation. . My cost for hitch and wiring $xxx. for my 2006 CR-V. Watched the videos and installed all of it by myself within an hour and a half.
Extremely satisfied with the service and the product. If I had not watched the videos I would not have tried it. Thank you Etrailer and Katie in customer service. I will use your service and recommend you to others.
Sergio G.
11/21/2017
Everything is working properly and if I ever need any similar products I’m sure I will purchase them from etrailer.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chris W.
2/26/2018
Very well. For 3006 CRV, bolts about 14 too long and would contact muffler over certain bumps, causing a rattle. Resolved the problem by installing a spacer in the rubber grommets which connect the muffler to the car thus reducing muffler vertical travel when going over bumps