MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
(399 reviews)
Price: $189.99
In Stock
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
Retail:$219.99
Our Price: $189.99
You Save: $30.00
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
- All Info
- Reviews (399)
- Q & A (0)
- Photos
MORryde Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
Upgrade your trailer's suspension system with these rubber equalizers for a smoother, more comfortable ride. The rubber insert offers up to 3" of suspension travel for greater shock absorption.
Features:
- Rubber equalizers replace your stock equalizers for a smoother ride
- Rubber insert dampens road shock
- Provides up to 3" of suspension travel
- Reduces back-and-forth chucking
- Requires less maintenance than equalizers with air bags
- Mounting hardware sold separately
- Made in the USA
Specs:
- Application: tandem-axle trailer with 33" wheelbase and double-eye leaf springs
- Axle capacity: 8,000 lbs
- Dimensions:
- Distance between outer shackle bolt holes (center on center): 6-1/2"
- Distance between hanger bolt hole and outer shackle bolt hole (center on center): 3-1/4"
- Height from shackle bolt hole to hanger bolt hole: 3-1/4"
- Quantity: 2 equalizers
- 2-Year warranty (or 45,000 miles)
CRE2-33 MOR Ryde CRE3000 Trailer Suspension Equalizers - Tandem 33'' Wheelbase
Item # MR87ZR
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K - MR87ZR
Average Customer Rating: 4.7 out of 5 stars (399 Customer Reviews)
Upgrade your trailer's suspension system with these rubber equalizers for a smoother, more comfortable ride. The rubber insert offers up to 3" of suspension travel for greater shock absorption.by: Shane03/16/2024
This was a great upgrade on travel trailer replacement of the original equalizer.This was on a 2024 Jayco and took for both sides with the upgraded shackles with wet bolts took about 3 hrs. Well wort
by: Kenneth 03/10/2023
I purchase these for my son's trailer. I fitted a set on my 5th wheel over a year ago and have noticed the difference. I like the fact they are bronze bushing and have grease zerks.
by: Brent 04/11/2024
Great upgrade. These help improve the ride in the truck while towing. Less items move in the trailer. Definitely worth the upgrade. I would do this again on the next trailer if not installed by the factory. Also, upgrade your shackles to wet bolts.
by: Dennis11/19/2023
This has been a great improvement to the suspension system on my RV trailer. You can feel the difference going down the road. Would recommend this upgrade if your RV came without this system as mine did. It should be standard on all RV trailers.
by: Carl 04/27/2024
I had the Morryde CRE 3000 suspension kit installed on my other 5th wheel and it was great. I haven't had a chance to install this one yet but I am expecting the same great quality from Morryde.
The staff at E-Trailer was was excellent to work with and a great help then a problem arose. I would highly recommend both E-Trailer and Morryde from my experience . They care about customer service. Well done.
by: Eli A.05/28/2023
Excellent upgrade over the stock equilizer. You can definitely tell a difference in ride quality going over any type of bump and improves porpoising recovery. We did have to readjust our weight distribution due to the extra 3in height the new equalizers add so something to think about. You will notice a difference in ride quality for the better. 5 stars
by: Charles04/25/2024
I replaced the shackles, leaf springs and shocks on my fifth wheel. Man what a difference!
by: Henry04/06/2024
Great addition to the 5th wheel, easy installation.
Note: Must have the skill and the tools to do it safely.
by: Rick 05/15/2024
E Trailer did great on this order. The people I talked to were excellent they help me the only downside this whole thing is a dumb US Postal Service. I think they hire the dumbest people on the planet and try to give them a job so they won’t be on welfare.
by: Mark 02/10/2024
Great addition to any trailer. Very noticeable improvement right away. Installed these on a Winnebago Voyage...straightforward install if you have the space and tools (jacks and impact wrench). Use the wet bolt kit too.
by: David12/20/2023
I replaced my trailers equalizer and shackles with new ones from MorRyde a year ago. Installation was straightforward using my own tools. My stock equalizers were the solid metal ones, the CRE3000’s have rubber bushings to absorb some of the shock. The heavy duty shackles are twice the thickness of the stock ones for extra strength. I also put in greasable wet bolts with brass bushings. I’m totally satisfied with each of these components.
by: Andy 02/07/2024
They shouldnt be allowed to sell travel trailers without these on them! This not only calmed down the trailer they help the jarring felt on the truck as well
If you own a brand new trailer or one a few years old out these in right away
By the way my trailer was only 2 years old and old hardware was shot out already
by: Dan04/26/2024
Didn’t ship as expected, was shipped with different shipper than the rest of the order and it is to arrive 5 days later the rest of order. Don’t recommend if you need parts timely and do not schedule repairs until after you receive your order. Not reliable.
by: Mike01/23/2024
LOOKING FORWARD TO INSTALL EQUALIZERS WITH MY WET BOLT KIT.WILL ADVISE WHEN PROJECT IS COMPLETED.ALSO LIKE TO MENTION THAT MY ITEMS WERE PACKAGED AND PROTECTED VERY WELL!THANK YOU
by: Ronald 03/06/2024
Ride is smother, trailer follows like it should. No more tire problems..
by: Joe02/05/2024
They are nice, but the installation was tough. I spent hours working on this only to find out every wet bolt was .015 thousand oversized. No bolt would ever go in, no matter how hard I hammered. I chucked every wet bolt in a lathe and cut down part of the knurls. Something most people do not have access to. Every bolt (knurl) was a larger size.
by: Ned 08/21/2022
These Equalizers are a huge step up from stock. It made towing a quiter, smoother, and solid ride going down the road. Very good investment.
Frank J.
8/22/2023
After a year of roaming around with our 37 Travel Trailer and the CRE3000s, I have to say there is no update. That is a good thing it still rides, feels, handles, and sounds as great as it did the day we put them on. Great investment without a doubt put em on!
by: Robert09/26/2022
Installed on a 2018 Prime Time Avenger ATI. Rear axle failed (lost its arc resulting in a burred spindle and inconsistent tire wear). During inspection of the hanging components, found the OEM shackle links failed or in the process of failing. Took approximately 12 hours (dodging periodic rainstorms) to replace rear axle and the suspension kits and springs for both axles. Installation was straight forward without complexity. I can now rest easy that these parts will last longer.
by: Aaron10/21/2023
Still haven't put them on yet
Katrina D.
10/21/2023
We will be here when you do put them on and would love to hear how they are working for you.
by: Craig07/24/2023
This MORyde tandem equalizer is 3 steps above the cast steel factory equalizer. Fit perfectly and rides much better with the rubber bump stops and all new wet bolts. Near zero chucking and at times I forget it's back there and I highly recommend.
by: Roger05/28/2022
I had the Morryde equalizer installed & my mpg improved from 10 mpg to 14 mpg.
Roger
5/30/2023
Excellent . Softer ride.
by: James 08/11/2023
Upgraded an original equalizer on my 2006 travel trailer. Combined this with the wet bolt and heavy duty shackel kit. Trailer rides much smoother and quieter!!!
25
396
Show More Reviews
See what our Experts say about this MORryde Trailer Suspension Parts
- Replacement Options for MORryde SRE400 Rubber Equalizers for 33" Axle SpreadI do have a replacement option for your MORryde SRE400 Rubber Equalizers but we don't currently offer the MORryde AllTrek Rubber Equalizers for a 33" wheelbase. Instead, we have the MORryde CRE3000 Rubber Equalizers part # MR87ZR or you can switch gears entirely and go with the Road Armor Shock Absorbing Equalizer Kit part # LC696740. These are both great options, if you have had bad luck with the MORryde I recommend trying the Lippert (Road Armor).
view full answer... - Suspension Enhancement for 2019 Chevy Tahoe and 2016 Coachman Apex 269RBSSFor an air bag kit that fits your 2019 Chevy Tahoe the Firestone Coil Rite kit part # F4147 is your best option as it has the highest quality bag available and would give you ability to add exactly as much suspension support as you'd need by adjusting the air pressure in the bags. The bags of this kit basically just slip between the coils of the spring for installation. The jounce spring solutions are great too like with the Timbren part # TGMRYS4 but the support they provide isn't adjustable...
view full answer... - How Do I Know If The MORyde Rubber Equalizers Will Fit On My TrailerThe MORyde Rubber Equalizer # MR87ZR could absolutely be used on an enclosed trailer. The 8K rating would be per axle. It might be more accurate to say that these equalizers can be used on axles 8K and under. So if your trailer is 10K gross weight, a Moryde rubber equalizer is appropriate for that kind of setup. If you want to be sure it will work on your trailer, the best way is to measure the current equalizer. If the length and height match that of the MORyde equalizer then it will...
view full answer...
- 2 inch Lift Kit for Jayco 5th Wheel with MORryde CRE3000 Cushioned EqualizersThe Lippert tandem axle lift kit part # RR23QX does not work with your MORryde CRE3000 suspension kit # MR87ZR.
view full answer... - Picking Out MORryde CRE3000 for 2017 Jayco North Point 351 RSQSMeasure the wheelbase of the axles on your 2017 Jayco North Point 351 RSQS. If it's 35 inch you'd want the part # MR27ZR or if it's 33 inch # MR87ZR.
view full answer... - Cushioned Equalizer to Upgrade Dexter TREQ310The Dexter EZ Flex part # K71-652-00 can be used to replace your # TREQ310 but you would lose a little bit of height on your trailer since this is a shorter equalizer. Or for something more similar in height we have the MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K # MR87ZR but this will require shorter shackle straps part # MR46ZR.
view full answer... - Replacing Shackle Straps After Switching To A Taller Equalizer Hi Mike, With the height of your equalizer increasing an inch you might need to switch to 3-1/8" shackle straps # TRSL313 to keep the leaf spring stack level but this isn't an exact science so your leaf springs could end up sitting too close to the equalizer and will bind up. Your suspension should form a 'W' shape with the equalizer and shackle straps for proper suspension travel. Too far in or out with your shackles will cause binding or will flip the axles down on the equalizer. Because...
view full answer... - Replacement CRE 3000 MORryde Equalizer and Wet Bolt Kit For a 2016 Jayco Eagle HT 5TH CamperYou are going to have the MORryde Rubber Equalizers # MR87ZR on your 2016 Jayco Eagle HT 5th wheel trailer. These equalizers have the 6-1/2" horizontal measurement while the Kit # MR27ZR you found are 8". You will want to use the matching equalizer and not go up to the wider equalizer. You will need to measure your current shackles to determine if you will need the 2-1/4" # MR46ZR or 3-1/8" # MR76ZR MORryde Suspension Upgrade Kit. The length of the shackles are measured from center of...
view full answer... - Can MORryde SRE3000 be Upgraded to SRE4000Yes, you can replace the SRE3000 kit part # MR87ZR that you have on your 2018 Seismic 4212 with the SRE4000 # MR77ZR using the same hardware you have now and you'll gain suspension travel and better bracing which will translate into a better ride quality.
view full answer... - Cushioned Equalizer for 2021 Coachmen Freedom Express Ultralite Model 192RBS SuspensionSince your 2021 Coachmen Freedom Express Ultralite Model 192RBS has Dexter 13-104 equalizers one solution is the EZ Flex Equalizer kit part # K71-652-00 which is an exact replacement but with cushioning. Your current equalizer is 5-1/4 inches long which there isn't a MORryde setup that matches that dimension which is why they don't offer a solution. The EZ Flex equalizers have a great reputation for improving ride quality so that would be a great choice.
view full answer...
- MORryde Rubber Equalizers and Shackle Upgrade for a Haul-About Trailer with Liberty AxlesSince you have a 33" axle spread I recommend the MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase item # MR87ZR. They are cushioned so they will do a great job of absorbing road shock and providing a smoother ride for your new Haul-About Trailer with Liberty Axles. If you have 2-1/4" long shackles you will need the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long item # MR46ZR, and if your shackles are 3-1/8" long you will need the MORryde Suspension...
view full answer... - How to Fix Clogged Trailer Equalizer Grease FittingsThe MORryde # MR87ZR itself doesn't feature grease zerks, so you're likely referring to the bolt holding the equalizer in place, referred to as a wet bolt. If you're certain that the grease gun is working correctly, it's possible that the zerks themselves are clogged. To unclog them, use a hair dryer or a heat gun on its LOWEST setting. Have a helper hold the dryer or gun on the zerk fitting until it's heated, then immediately attach the grease gun and add grease. The new grease will eject...
view full answer... - Replacement MORyde Equalizers for a 2004 Holiday Rambler Presidential 36SKQ 5th Wheel TrailerThanks for all the information. I wasn't able to identify what suspension system you have on your Holiday Rambler. A couple of people thought it might be a custom job. To replace it you will want to measure the distance between your two axles. If it is 33" you will want the MORryde Rubber Equalizers item # MR87ZR. If it is 35" you'll want the MORryde Shock Absorbing Suspension Equalizers item # MR27ZR. The Road Armor Shock Absorbing Equalizer Kit item # LC696740 isn't going to work with...
view full answer... - MORryde Cushioned Equalizer Kit that Fits 2019 Keystone Cougar 22RBSThe MORryde cushioned equalizer kit part # MR87ZR will work great on your 2019 Keystone Cougar Half Ton 22RBSand then for a shackle kit you'd want the part # MR58ZR for a 2-1/4 inch long shackle or part # MR76ZR for 3-1/8 inch. You'd have to measure what you have now to know which you'd need as there isn't a way for me to look that up.
view full answer... - MoRryde CRE3000 Equalizers on 31 Inch Tandem Axle SpacingI just spoke with my rep at MORryde and she said that you are able to use the CRE3000 MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K item # MR87ZR on a tandam axle trailer with 31 inch spacing if your are using 24 inch leaf springs.
view full answer... - Correct MORryde CRE3000 for 2017 Genesis 19SS CamperThank you for all of the info you listed and the pictures. Based on that the MORryde Rubber Equalizers for Tandem Axle Trailers # MR87ZR is the correct fit. Your trailer does not have the Correct Track setup on it. There would be a height difference of about 1.5 inches. The # MR46ZR is the correct wet bolt kit too.
view full answer...
- Recommended MoRryde Equalizer and Replacement Shackles for a 2023 CrossRoads Sunset Trailer Thanks for the measurements and additional information! To determine which MORryde Equalizer you need you'll want to measure the distance at the bottom of your current equalizers from the center to the center of the bolt holes. The MORryde item # MR87ZR measures 6-1/2" and is for 33" wheelbases. The MORryde item # MR27ZR measures 8" and is for 35" wheelbases. I have linked a couple of diagrams below. To replace your 2-1/4" shackles, I recommend the MORryde Suspension Upgrade Kit item...
view full answer...
- Picking Out MORryde CRE3000 and Replacement Leaf Springs for 2016 Keystone Cougar 333MKSHey Brian, so to pick out the correct MORryde CRE3000 kit will require you to measure the distance between the wheel centers on your trailer. If that distance is 35 inches you'd need the part # MR27ZR or if it's 33 inches part # MR87ZR. We don't have a way to find the wheelbase of your trailer. The leaf spring replacement you'll need is based on two things. The axle capacity of your trailer and the length of your currenet springs. I don't have a way to look that info up either so you'd...
view full answer... - Replacing Lippert Equa-Flex Equalizers With MORryde CRE3000 EqualizersYou currently have the Equa-Flex Cushioned Equalizers # LC279687 used with your Lippert axles. We do have the MORryde Rubber Equalizers # MR87ZR that you can use to replace your current equalizers. These have 3" of travel and are rated for axles up to 8,000lbs. When you do replace them I recommend adding the MORryde Suspension Upgrade Kit # MR46ZR to upgrade the mounting hardware to wet bolts. The wet bolts will allow the suspension system to be able to cycle more effectively. I recommend...
view full answer...
- MORryde Equalizer Upgrade Kit For 35 Inch WheelbaseThe MORryde # MR87ZR are 6-1/2" wide from bolt hole to bolt hole so won't be wide enough for a 35 inch wheelbase; instead, for that wheelbase you will need the following: - MORryde Shock Absorbing Suspension Equalizers # MR27ZR These are 8" from bolt hole to bolt hole and designed specifically for 35" wheelbases. These are 3-1/2" tall, so your ride height will depend on what your current equalizer sits at; so long as it is similar, the difference will honestly be negligible. You can still...
view full answer... - Recommended Equalizer and Shackle Kit To Upgrade A 2011 Eclipse Milan 26RLS With 33 Axle SpacingThere can be a few different widths and eye hole diameters depending on the type of spring, especially slipper springs, but generally, all double eye springs for trailers will measure 1-3/4" wide and use 9/16" diameter eye hole. With that said, lets get you set up with a kit. As you mentioned having 33" of axle spacing, I recommend going with the MORryde Rubber Equalizers # MR87ZR to start with. I have been pretty impressed with the MORryde products and have zero complaints or issues with...
view full answer... - Upgraded MORryde Premium Rubber Suspension Kit for Keystone Toy HaulerThe MORryde Premium Rubber Suspension Kit for Tandem Axle Trailer, # MR87ZR fits a 33" Wheelbase and up to 8k axles.
view full answer... - Can A 6-1/2" Equalizer Replace A 5-3/4" Equalizer Suspension gets to be a bit tricky when replacing components with different sizes since there isn't an easy yes or no answer and it requires a bit of playing around to determine what will fit correctly. Your suspension needs to be able to flow back and forth to handle the bumps in the road. You'll want to form a "W" shape with your equalizer and shackle straps in order for your suspension to have enough room to flow back and forth. Going to far in or too far out with your "W" will limit...
view full answer...
- Steps To Figure Out Which MORryde CRE3000 Equalizers Fit 33-1/2" Axle Spacing
I want to upgrade tWhen looking for replacement equalizers axle spread is a guide and will not give you an exact this fits or doesn't. What you'll need to do is measure center to center of the horizontal holes, and from the center of the top hole to the center line of the lower holes. This is shown in the below diagram of the MORryde # MR87ZR you were looking at, so as long as you get measurements of 6-1/2" and 3-1/8" this will be the correct replacement for your 2019 Wolfpack 325/13. If you find a different...
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Kathleen M
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Carrie F
Video by:
Dustin K
Video by:
Ethan H
Test Fit:
David F
Test Fit:
John A
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kenneth
3/11/2024
Yes, I like your product. It give me more confidence when towing my 5th. Wheel. Also I think it feels better when Im towing 3 items that stand out. 1. The thickness of the shackles for strength 2. The bronze bushing good wear factor. 3. The availability to grease the bronze bearing. Reduces wear. I like these so much that I purchased a set for my sons travel trailer.