Custom Fit 2010 Mazda 3 Accessories

You actually will want to open the end of the crossbar like in the picture I attached and then slide the strip down the end of the crossbar. You would not want to try and press it in. Hope your thumb feels better!

There is not a way to run full trailer lights without tapping into your vehicle wiring. For a one time tow for about an hour on the highway as you stated, the simple solution is to use a couple of warning lights like the Blazer Amber Warning Beacon…

You have done your research. As you have seen, all of the hitches for the 2010 Mazda 3 are Class I trailer hitches. The Draw-Tite and Hidden Hitch models do have the safety notch in them that prevent the insertion of a Class II accessory. This is…

There are specific fits for a 2010 Mazda 3 for the hatchback vs. the sedan. If you have a sedan, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11393. If you have a hatchback, I recommend the Draw-Tite…

Your Mazda 3, if equipped with the factory wheels and tires, you can use either the Thule CB12 Size 090 chains, part #TH01221090 or the Thule K-Summit Chains part #TH02230K23. The K-Summit Chains are the easiest and quickest chains to install. The…

Yes indeed! Draw-Tite trailer hitch #24843 does fit the 2013 MazdaSPEED 3. If you plan on doing some towing you will also need the recommended ball mount and a ball. Use #19256 for a 1-7/8 inch or #19258 for a 2 inch. For trailer wiring, if the…

The Draw-Tite Sportframe Trailer Hitch Receiver #24843 is a great product to pair with the Kuat NV 2.0 Base #BA12B. The #24843 has a maximum tongue weight rating up to 200lbs and the #BA12B weighs 49lbs and has a weight capacity of 60lbs per bike. As…

Hey Dylan, so Curt has a hitch that fits the 2010 Mazda 3 sedan with the part #C11393 but the #C11383 only fits the hatchback models.

If I personally had to choose between the two, I'd go with the Thule #TH911XT. I actually prefer the looks of the #SA805BL Saris Bones, but I don't care for the way that the weight of the bikes and the rack rest on feet that small. Spreading…

To get replacement install hardware for the Curt hitch you referenced #C11383 from us what you need is the part #RHK. This is our part number for replacement hitch install hardware. You would need to select Curt from the drop down menu on the page…

For a roof rack confirmed to fit your 2012 Mazda 3 hatchback with fixed mounting points the Rhino Rack part #RR54GR that you referenced would be a great choice and the one I would go with. The aero style bars will be much quieter than a square bar.…

I'm not sure what you have on the back of your Traverse but I am going to assume you have a 2" receiver as that's pretty standard amongst mid-sized & larger SUVs. If that's the case, the Hollywood Racks RV Rider Bike Rack for 2…