Manual Switch Kit for Pace Edwards Bedlocker Retractable Hard Tonneau Cover

Question

Question:

What is the part for the manual switch?

asked by: Betty

0

Expert Reply:

The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover # PE44CV can be found as part # 311-BL-1120 on our site.

This plugs into the harness at the canister and then you route and install the switch wherever it works best for your situation.

expert reply by: Jon G

0

Answer 1

Your 2019 Ford F-350's Upfitter Switches can be used instead of the toggle switch for the Manual Switch Kit for Pace Edwards Bedlocker or UltraGroove Electric Tonneau Cover #311-BL-1120. The Manual Switch Kit #311-BL-1120 will work with the…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE44CV can be found as part #311-BL-1120 on our site. This plugs into the harness at the canister and then you route and install the switch wherever it works best for…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

We do have that exact lube with the Aqua Lube part #RM-400-011-30.

view full answer...

Answer 6

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

I recommend installing the Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 which are confirmed to fit your 2024 GMC Sierra 3500 Denali Dually. I prefer these over others as they have an internal jounce spring which helps reduce bouncing when…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I recommend going with the 30K Curt PowerRide #C36WR for the puck system on your 2024 Chevy Silverado 2500 short bed because of the high weight capacity and the smooth towing experience it offers. Normally for short bed trucks we recommend a sliding…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

Hey David; I checked directly with Pace Edwards for you and can tell you that the rails on the Pace Edwards Switchblade Retractable Hard Tonneau Cover #PE46QJ will protrude just under 3/4" on both sides when installed on your Ford Super Duty…

view full answer...

Manual Switch Kit for Pace Edwards Bedlocker Retractable Hard Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching