Review of Timbren Trailer Suspension - 7,700 lbs Silent Ride Suspension - T89MR Video

For a 6" or 8" axle, I'm not seeing anything for that unfortunately - however, for your 14K livestock trailer, I recommend checking out the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01. This system will work…

The maximum deflection or compression/movement of the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01 is 1-5/8 to 1-7/8 inches. That's the amount it will move from zero load to full compression.

The 8 on 6-1/2 inch description that you see for the Dexter Trailer Hub #8-285-11 refers to its bolt pattern. It is important to note this feature when replacing your hubs because it needs to match the pattern on your existing wheels for the wheels…

The hitch pin weight of 1400 lbs you stated is so close to your payload capacity, but that is not accounting for the 5th wheel hitch and rail weights or the loaded weight with cargo added. Tunda's are notorious for having a lower payload and in…

Correct, the Timbren Silent Ride Suspension for Tandem Axle Trailers part #TSR14KT01 is designed for 7,000 lb axles as the total capacity is 14,000 lbs. It is also designed for a 33" axle spread. If you have a 35" axle spread you'll…

The review you mentioned does have a customer of our having to install a 4 inch sub frame spacer to install the Timbren #TSR14K35T01 like you mentioned to accomplish the same ride height as their previous straight axle setup. But worth nothing is…

A Timbren Axle-Less system or Silent Ride system would definitely upgrade the stock leaf spring set up on any camper or trailer. That being said, there are a couple things to keep in mind when choosing one of these systems.. The Timbren Axle-Less…

The Timbren Silent Ride #TSR14KT01 can actually be installed by welding it on or bolting it on. You could do both welding and bolt it on, but that is not really necessary. I am not sure of the bracket to move it around on the frame, but they do have…

Thank you for the images. The MORryde Rubber Equalizers #MR87ZR are the correct set for your 2020 Keystone Outback Ultra-Lite 291UBH. You will pair this with the MORryde Suspension Upgrade Kit #MR46ZR. Instead of using the wet bolts included with the…

The gooseneck ball coupler on the Curt CrossWing #C92DR will only work with a 2-5/16" diameter gooseball. Since you have the OEM prep package I recommend picking up the Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K…

The MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR includes one adjustable crossmember. Your existing hardware will be too short due to the extra thickness of the crossmember, so you will need to add #MR58ZR if…

The MORryde X-Factor Crossmember part #MR33WR is designed for standard suspension so that is the one you will need to use. If your leaf spring hanger brackets are wider than 3" then you will need to drill per the instructions which I have…