Thule Hitch Bike Racks Review - 2011 Toyota Sienna TH9025XT Video

The etrailer.com hitch part #E98853 would be an excellent choice for your 2019 Toyota Sienna in terms of exhaust clearance. I attached a picture of the hitch installed and you can see that it easily fits with the exhaust with room to spare.

The Thule #TH9025XT Apex use an aluminum adapter on the 1-1/4 inch square shank that converts them for use in a 2 inch receiver. I confirmed this by pulling a #TH9025XT off the shelf and inspecting the adapter. I've linked you to a product…

Your best solution would instead be to use a bike frame adapter bar like part #UB01. This will attach to the steering stem and the seat post of your bike to give your Thule Parkway a place to attach to.

The Anti-Sway cages on the Thule Hitching Post Pro #TH934XTR bike carrier can be seen in the linked photo and in the video at about the 2:40 mark. The anti-sway cages and straps secure the bike frame tube and front wheel to avoid the bikes moving…

When we test fit hitches, we take note of above ground height of the inside top of the receiver tube. When the size of the receiver (2 inch or 1-1/4 inch) and the thickness of the lip around the receiver (1/4 inch) is deducted, you get a good…

The Thule Apex XT 4 Bike Rack part #TH9025XT should work just fine on a 2018 Subaru Crosstrek with factory hitch. This is not something we have tested ourselves but I am not aware of any issues with this setup. If you wanted to be 100% certain simply…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…