Thule Apex XT 4 Bike Rack Review Video

If you are considering the Thule Helium Pro 3 Bike Rack - 1-1/4" and 2" Hitches #TH9043PRO and the Thule Apex XT 4 #TH9025XT, there are some differences to consider. First off, since the Helium is made of durable aluminum, it has a…

The Draw-Tite Class III Trailer Hitch, item #75547, is the correct hitch for your 2008 Honda CRV. This hitch does not come with the Draw-Tite Hitch cover. The cover with the Draw-Tite Hitch Logo is available as item #DT7010, but does not include a…

To return the Thule Apex XT 4 Bike Rack for 1-1/4" and 2" Hitches #TH9025XT back to the upright position, you will need to remove the M6 bolt, lift the handle, and pull the rack upright. Once the rack is upright, replace the M6 bolt and…

For your application I recommend going with the Thule Apex XT #TH9025XT. This can hold up to 4 bikes and has a max weight rating of 37.5 lbs per bike. I really like the 7" spacing between the cradles because it makes it a lot easier to load up…

On your Thule Apex XT 4 Bike #TH9025XT, the pin should go into your trailer hitch receiver hole and into the rack shank on the one side only. It won't go all the way through to the other side but will solidify the rack in place and then you will…

For your 2018 Honda Pilot I really like the etrailer.com Class III Trailer Hitch, #E98840, because the hidden design gives it an inconspicuous OEM look without sacrificing any towing or tongue weight capacity. It is also the only trailer hitch for…

The original Thule Helium was made of ultra-lightweight aluminum, featured sliding anti-sway T3 cradles with rubber straps. The cradle arms were spaced 12 inches apart (outside to outside). The rack could fold and tilt. It also featured an integrated…

Since you have the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #C13200 on your 2017 Toyota Highlander you aren't limited to a certain type of rack because your hitch is a class III hitch receiver. Both the Thule Apex XT 4…

That bolt is what the anti-rattle device pivots on as you tighten it. As long as the knob can still turn by hand it's not too tight. If you went back to the same position it was in prior you are totally fine.

Both the Thule Camber #TH9056 and the Yakima BackRoad #YA44FR are good choices. The main difference is the straps for your bikes. The Zip Strips on the Yakima will need to be removed every time you put a bike on or off the rack, the Thule straps will…

The EcoHitch Invisi Trailer Hitch Receiver part #EH39FR which is a fit for a 2021 Tesla Model Y has a 3,500 lb gross trailer weight and 350 lb tongue weight rating. That said, these ratings are for the hitch only which is tested separately of the…

When you receive the Thule Apex XT 4 Bike Rack #TH9025XT the shank is folded up against the main mast of the rack. Those two M6 x 25 mm screws are what help to keep the shank from folding up like that again. They are more or less a security measure…