Swagman Pick Up Truck Bed Bike Racks Review - 2015 Ram 2500 Video

Yes the Equal-i-zer weight distribution shank part #EQ90-02-4900 is essentially the exact same shank as the 90-02-4325 you mentioned with exact same dimensions and capacities.

To determine how much of a Rise or Drop you would need so that your towing setup is level you will need to compare some measurements. Start off my parking your 2017 GMC on level ground and then measuring from the ground to the top of the receiver…

The best air bag kit we offer for your 2019 Ram 2500 is the Firestone kit part #F2706. We've found that the Firestone bags are the highest quality and longest lasting so we recommend them the highest. I attached an install video for the kit for…

I've linked our selection of weight distribution shanks for 2-1/2 inch hitch receivers. Most shanks are universal and will work with other brands of systems. As long as the holes are 3/4 inch in diameter and are spaced 1-1/4 inches apart…

I have a rack that I can guarantee will work, the Thule T2 #TH69TX can work on bikes with tires that are up to 29 inches in diameter, have a wheelbase of up to 50-1/2 inches, and has a weight capacity of 60 lbs per bike. Had I known the wheelbase you…

The Equalizer Shank part #EQ90-02-4900 that you referenced measures 11-1/2 inches from the top of the shank down to the very bottom of the shank. Overall length is 13 inches, from hitch pin hole to end of the shank measure 9-3/4 inches.

You will only need to replace the shank of your Equal-i-Zer system with one that fits the 2-1/2 inch hitch size and also provides you with the correct amount of drop to tow your trailer level. Thankfully the heads of weight distribution systems are…

I am not aware of any legally mandated minimum ground clearance requirement for trailer hitch receivers in any states and my online research did not reveal any such laws. However, I did find on an internet forum for Sienna owners posts related to…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…

Based on the pictures you attached (thank you!) it looks like you have the Equal-i-zer Weight Distribution Shank #EQ90-02-4100 that allows for a drop of up to 3 inches from the top of the hitch receiver opening. The adjustment portion of the shank…

Thank you for providing a photo of your trailer coupler. Trailers should always be level when hitched. If a trailer is out of level when towed it will tend to have more sway. I notice you have weight distribution (WD) lift brackets on your trailer…