Customers compare SLLS28RER to these similar products
Products Featured in this Video
Today we're going to be taking a look at the Snap-Loc E-Track Style Ratchet Strap with the Soft Loop End. This is 2" wide, 8" long. Part number on it is SLLS28RER. The first thing that stands out is going to be our strap keeper here. As you can see that's going to keep our strap really nice and tidy for us until it's time for use. You won't have to worry about untangling knots or trying to figure… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Talon Series Winch, #SW1612201, that you referenced is a large winch and may be overkill for your truck. The Talon winches are high-performance recovery winches that they will have a faster line pull, an adjustable clutch, an upgraded remote and…
view full answer...From the pictures you sent in, it looks like the hinge assembly itself rusted through and ripped off. It seems like it may have been fabricated by the previous owner. That latch style is usually accompanied with a bar like with the Cam-Action…
view full answer...Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…
view full answer...To install an 8-foot length of Erickson E-Track #E19135 inside your enclosed trailer I do recommend first mounting some plywood to your interior wall studs. A piece of plywood that is larger than the E-Track's 5-1/8-inch width will spread the…
view full answer...Yes, the Erickson Horizontal E-Track part #E19148 will be plenty strong enough to secure your two rock crawler buggies. The tracks are each rated at 6,000 lbs max break strength and 2,000 working load limit. I assume you would have a track under each…
view full answer...The Erickson Adjustable Wheel Net with E-Track Fittings part #77314 will mostly likely work on a 30" diameter tire just fine however, I cannot confirm this as the manufacturer lists the max limit at 29" diameter. If you can provide me with…
view full answer...In order to achieve the full capacity of the ratchet straps and the track, the direction of the pull should be parallel to the direction that the e track is running. How much the capacity would be diminished by pulling 90 degrees to the side will…
view full answer...Yes. The etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 8' Long #e62VR can be driven on without any issue and have a maximum capacity of up to 6000-lbs each(break strength), so they'll be able to handle your ATV/UTV without…
view full answer...Sounds like you are looking for something like the Erickson Adjustable Wheel Net part #77314 which attaches to a section of E-track and holds a vehicle wheel securely. This is pretty similar to the Pack Em #PK-WTD that you referenced as well.
view full answer...Since you will be using tie downs as well as the E-Chock Wheel Chocks #EM09162-2 you shouldn't need more than 1 pair. Your tie downs should be rated for over the weight of your golf cart so the wheel chocks are meant to be used as a wedge to…
view full answer...You can install the Erickson Horizontal E-Track #E19148 in any manner you like, so for a car hauler that has cars of different widths you can place E-track side-by-side, as you can see one of our customers did in the accompanying photo. This E-track…
view full answer...While you can absolutely drive on the Erickson Horizontal E-Track #E19148 the track is far more likely to last long term if you have it recess-mounted or you have it installed so that the track is just to the side of your SUV's tires. Then for…
view full answer...