Recommended Weight Distribution Solution for V-Nose Trailer
Question:
Hello, I have a 20foot Lark V Nose trailer. the length of exposed tongue/trailer frame is limited to approx 28inch from center of ball to V-Nose/Trailer wall. I purchased a EAZ Lift 1000 lb weight distribution hitch, but the tension bars are too long. The frame saddle that attaches to chains cannot be mounted properly. The exposed frame is short by about 4. Are any of the other brands you carry compatible with my V-Nose set up? If not, other recommendations? thanks.
asked by: John
Expert Reply:
We may have something that will allow you to install a weight distribution system on your V-nosed trailer. The bolt-on chain hangers, part # RP58305, provide an attachment point for your weight-distribution spring bars without interfering with trailer-frame-mounted items. They are specially designed to eliminate clearance problems by attaching to the side of trailer tongue. However Reese has not tested these parts together and combining parts from different manufacturers may void the warranty.
I have included a link to the installation instructions for you to check out.
I attached a FAQ article on weight distribution systems for you to check out as well.
Product Page this Question was Asked From
Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 20,000 lbs GTW, 2,000 lbs TW
- Video: Review of Blue Ox Weight Distribution Hitch - 20,000 lbs SwayPro w/ Sway Control - BXW2000
- Q&A: Reese Chain Hanger Recommendation for Trailer that Will Not Accommodate Traditional Lift Brackets
- Q&A: How to Install Weight Distribution System on Trailer with V-Nose
- Shop: TorkLift SuperHitch Everest Weight Distribution System - 30,000 lbs GTW, 3,000 lbs TW
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Shop: Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Shop: Reese Dual Cam II Weight Distribution System w/Active Sway Control - No Shank - 12K GTW - 1200 lb TW
- Video: Blue Ox SwayPro Weight Distribution System Manufacturer Demo
- Video: Reese Dual Cam II Weight Distribution System Review
- Video: Review of Reese 12K GTW - 1200 lb TW Cam II Weight Distribution System - RP75FR
- Video: TorkLift Weight Distribution - WD Only - TLWD1000 Review
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 15,000 lbs GTW, 1,500 lbs TW
- Shop: ProPride 3P Weight Distribution Hitch w/ Sway Control for 2" Receivers - 14K GTW, 1.4K TW
- Video: Review of Blue Ox Weight Distribution Hitch - 20K SwayPro for Underslung Couplers - BXW2003
- Video: ProPride 3P Weight Distribution Hitch with Sway Control Review PR37QR
- Search Results: weight distribution hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Weight Distribution Recommendation for a 2024 Jayco Flight 284BHS
- Shop: Trailer Hitch
- Search Results: weight distribution sway control
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: What is Difference Between Overslung and Underslung Trailer Coupler
- Shop: Suspension Enhancement
- Q&A: Difference Between Underslung and Overslung Coupler For Weight Distribution System
- Article: Determining Trailer Tongue Weight
- Shop: Brake Controller
- Search Results: blue ox
- Q&A: Weight Distribution w/ Sway Control For 3 Inch Hitch & 10,500 lb Trailer
- Article: How to Measure for Trailer Hitch Drop
on Accessories and Parts
