Optronics Sealed Thin Line LED Trailer Clearance Light Installation MCL75RB Video

The Bonded 4 Wire - per foot #16-4B-1 you asked from would use the brown running light wire for your clearance/marker lights. The LED light you referenced sound like they have two wires so one will be power and the other ground. You can connect them…

The best option for rewiring a trailer is the 7-way junction box kit part #HS381-9000. You'll mount the box on the frame rail (or wherever works best) and then run the wires for all of the individual circuits to it and you'd be set.

The LED Porch and Utility Light for RVs part #DG52724VP has a ribbed lens that is designed to project light at a downward angle which you can see in the attached photo. The light will not project straight down but rather at an angle, downward and…

We offer high-efficiency LED-type trailer lights in various sizes, colors and shapes. The linked page will let you sort the results by clicking on the attributes you prefer. The results shown are already filtered to show only surface-mount red color…

Those part numbers are for trailer clearance lights, and the main difference between 1a-v-1240R and 1a-v-1260r is that the 1240R is a led light, and the 1260r is a incandescent light. Both lights have red lenses and are 3 7/8 inches long, by 1 1/4…

We have the Optronics Incandescent #MC65RB and Optronics Thinline LED #MCL75RB that use a red lens. The Optronics Incandescent #MC65AB and Optronics ThinLine LED #MCL75AB have an amber lens. A Optronics ThinLine LED #UCL65CB uses a clear lens with…

To order trailer lights you will want to order by part number on your lights or by the size of the light you will need. The SAE stands for the Society of Automotive Engineers and the 97 DOT stands for the Department Of Transportation. These part…

Thanks for the photo of your trailer! Based on the photo you sent in, it looks like the Bargman LED Trailer Tail Light #47-06-404 that you referenced will work well for you. This light measures 6-1/2 inches long x 2-1/4 inches tall and is designed to…

Yes, you just have to remove the old lights, match the wires and mount the new ones. Please note, that it is usually not a good idea to mix LEDs and incandescent lights, so if you have have side markers or other lights on the trailer, make sure you…

The 14-1/4 by 14-1/4 is the standard opening for a roof vent or vent fan, so the MaxxFan #MA00-06401K would be a great choice to replace your existing fan. The inside of the vent units usually measure 14 x 14, so everything will fit perfectly for…

There are some lights that are not polarity sensitive such as #MCL61ARB. So it will not matter which way you place it in base #A65PB. The light will ground through the mounting hardware and the wire connects to the running light circuit on the…

The closest LED replacement we have for the Trailer Clearance Light part 154A-R is the Thin Line LED Fender Clearance Light part #MCL65ARB. This light has both a red/amber lens, 10 diodes, and measures 3-15/16" long x 1-1/4" wide x…