Lippert Ground Control Leveling System Control Panel Review Video

Based on the parts diagram from Winnebago your 2013 Itasca Suncruiser 32H will use the Lippert Replacement 500:1 Motor for Electric In-Wall RV Slide-Out System #LC287298.

Yes, the Replacement Control Panel for Lippert Components Leveling System part #LC421484 has replaced the Replacement Auto Level Control Panel 234802 you have so this would fit and work great.

The blank screen on your LCI Ground Control 3.0 could be either a power issue or a control module issue. I recommend first remove the panel and unplug it from the back leaving it unplugged for at least 15 minutes so that it loses all of the residual…

The Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System part #LC421484 replaced the LC234802. It may look a bit different but it will still work great in its place.

The Replacement Auto Level Control Panel for Lippert Ground Control Leveling System part #LC421484 is just a newer version than the one you have now and can be used as a direct replacement. I was able to confirm this with my contact at Lippert.

The correct replacement circuit and control board for your Lippert Electronic leveling system is the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System #LC421484. This will be a plug and play solution, so…

If you have the Lippert Ground Control Leveling system on your trailer the correct replacement module/display is the part #LC421484. Feel free to email me back with the pictures you have and I'll take a look though.

When your Lippert Ground Control 3.0 #LC358590 has a reading that says "Comm Error" it is referring to the communication between the controller and touch pad. You will need to check your harness to ensure it is connected properly and there…

Yes, the Replacement Control Panel for Lippert Components Leveling System part #LC421484 has replaced the Replacement Auto Level Control Panel for Lippert Ground Control Leveling System part LC234802 and is what you need for your 2016 Keystone Raptor…

The Lippert Replacement 500:1 Motor for Electric In-Wall RV Slide-Out System, #LC287298 is the proper replacement part for Winnebago PN 181862-01-700 and is considered a high torque replacement motor. If your 2014 Itasca Solei 38R was built with the…

The good news is your system is working. That lets us rule out 2 of the 3 possible components. Before replacing the third one, I recommend unplugging the connections on the panel and cleaning them prior to reconnecting. If this doesn't solve your…

When you plug in the Lippert Replacement Control Panel #LC421484 it will immediately recognize the connected controller board. This part does not need to be programmed; it is plug-and-play, which was confirmed by Lippert. In a separate link I have…