Lippert Bump-It Hitch Receiver Adapter Review Video

In order to determine if you have enough space between your tow vehicle and your tear camper when using the Hitch-It 2 #LC731138, I definitely have some specs to help you measure your available space. Since you have 10 inches of available of straight…

The 1" x 9" cradle strap on your Jack-It 2 Bike Rack for A-Frame Trailers LC429756 are the longest straps offered. However, we do also offer the Replacement Straps for Cradles on Curt Standard and Premium Bike Racks #C18007, and the…

The Hitch-It 2 Bike Rack for Straight Tongue Trailers #LC731138 comes just as pictured with the arms that hold the two bikes and the trailer tongue adapter to attach the arms to the trailer tongue.

Yes the Hitch-It 2 Bike Rack for Straight Tongue Trailers part #LC731138 would fit on the shank of a Blue Ox tow bar like you have.

Is there anyway to get your bikes under 40 lbs like maybe by removing the seats and/or batteries? If so, there's a really easy solution with the Lippert Bike Wing Adapter part #LC731137 since your trailer has the Jack-It adapter mounted to the…

If you want to know if a particular spare tire cover will fit your RV tires, there is an easy way to find out. Simply read the numbers off the sidewall of your current RV tire. The most common tire sizes will have three parts, just like the…

The only thing we offer for a 1-5/8 inch hitch is an adapter like part #HT58 that will convert it to a 2 inch hitch. Adapters like this do cut the capacity of the hitch in half. I also attached a link to a page that has all of the 2 inch hitch ball…

The round or trunnion bars refers to the end of the spring bars. Round bars are typically designed for lighter applications, are a bit harder to install and are usually priced lower than trunnion bars. Trunnion bars are typically designed to be used…

Since you are pulling your trailer up at a 35 degree incline and there will be multiple layers wrapped around the winch (as that makes a difference) the Bulldog Winch Off-Road Winch #BDW10042 rated at 9,500 lbs is exactly what you need. Installing it…

To install a winch on your GMC Sierra 1500 I recommend installing a front mount trailer hitch receiver and use a removeable winch mount. This will allow you to have the winch when needed, but also allow you to easily remove the winch when you do not…

The Curt #C18087 bike rack isn't designed to be used on the rear of a towable. It's not the strength of the hitch that's in question, it's the bike rack itself. Bike racks used on the rear of a towed trailer are subject to much more…

Hello, not knowing your exact vehicle type I can not give you exact numbers. The measurements are from the center of the hitch pin hole. The Curt 4 Bike Platform Rack #C18087 will be approximately 13-15 inches to the first wheel hoop. It will have…