LaSalle Bristol XTRM 100 Self-Leveling Sealant Review Video

All of the RV roof vent covers on the market are designed a bit shorter than need for the vent lid to fully open due to height requirements. That being said, manufacturers have stated that as long as the vent lid opens 50% then the it will still be…

Both the Alpha Systems 1021 Self-Leveling Sealant for RVs - White - 10.3oz - Qty 1 #AL98KV and the Alpha Systems AlphaThane 5121 Self-Leveling Sealant for RVs - Gray - 9.8oz - Qty 1 #AL45KV are good for use on TPO roofing and will allow you to…

The only replacement hardware for the MaxxAir FanMate - which does include the hinge pins - is the Replacement Hardware Kit for MaxxAir FanMate RV Roof Vent Cover #MA94GR. The hinge pins by themselves are not sold separately, just as part of this…

Thanks for the picture! The closest replacement we have for your Monarch 5129 Lights on your trailer is the Triple LED #CE44VR. This light measures 14" x 6-7/8" so it should completely cover your old mounting holes, though it's going to…

The Ventline Exterior Wall Vent for RV Range Hood #V2111-55 has an overall width of 11-1/2" and height of 5-1/4". The collar is 1-3/4" deep and is designed to fit a 10-1/2" wide x 3-3/4" tall rough opening. Installation…

We don't have any way of knowing what vent is on the driver side of a 2017 Thor Venetian 40A, but so long as it is a standard 14" x 14" roof vent, for a cover you can use the MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955003.

The MaxxAir FanMate Rain Cover, part #MA00-955003 is specifically designed to fit the MaxxAir MaxxFan. The MaxxAir MaxxFan like part #MA00-04500K fits in a standard 14-inch x 14-inch opening. As the attached video shows the rain cover part…

The E-Z Clip mounts measure 18" apart in width and 11-3/16" apart in length on center for the MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955003. I have added a diagram below showing the spacing of the tabs. This is designed to fit…

You'd want to use the non-sag sealant part #344270341437-1 on vertical applications where you wouldn't want the sealant to drip or run. The #34427034145-1 is better for horizontal applications as it's self-leveling, but it would run or…

Yes, the Towing Mirrors part #CM10950 that you referenced that are a fit for your 2016 Chevy Silverado 1500 will still allow your factory mirrors to fold in. I attached a picture that shows the mirrors installed with them folded in as well.

You could remove the roof to fix the staples but that would require a ton of work and can be costly, which is why Alpha said it would be overkill. You could just hammer the staples back down and just use some self leveling sealant like the Alpha…

The LED Light Strip Kit #DIA86QR can be plugged into a 12-volt AC outlet, if that what you meant by regular house plug in your motorhome and it does not come with a transformer.