Dimensions Of The Ventline Exterior Wall Vent for RV Range Hood

Question

Question:

What’s the OD?

asked by: Rich

0

Expert Reply:

The Ventline Exterior Wall Vent for RV Range Hood # V2111-55 has an overall width of 11-1/2" and height of 5-1/4". The collar is 1-3/4" deep and is designed to fit a 10-1/2" wide x 3-3/4" tall rough opening. Installation hardware isn't included so you'll want to pick up some screws from your local hardware store and some non-sag sealant # 344270341437-1 to seal around the edge of the vent for a waterproof seal.

expert reply by: Kevin C

0

Exterior Dimensions
(click to enlarge)

Collar Depth
(click to enlarge)

Answer 1

Thanks for the picture! The closest replacement we have for your Monarch 5129 Lights on your trailer is the Triple LED #CE44VR. This light measures 14" x 6-7/8" so it should completely cover your old mounting holes, though it's going to…

view full answer...

Answer 2

You'd want to use the non-sag sealant part #344270341437-1 on vertical applications where you wouldn't want the sealant to drip or run. The #34427034145-1 is better for horizontal applications as it's self-leveling, but it would run or…

view full answer...

Answer 3

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with everything needed so it would be a great…

view full answer...

Answer 6

In the Furrion RV Tankless Water Heater #FR48SR it lists that a non-toxic antifreeze solution can be ran through the system to winterize it and to plan for an additional 1L of antifreeze to fill the water heater's pipes. When winter ends…

view full answer...

Answer 7

Hey Duke, the Ventline Pinnacle RV Range Hood part #VE33SR that you referenced will draw up to 5 amps at 12 volts.

view full answer...

Answer 8

Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes, the…

view full answer...

Answer 9

Thanks for reaching out, Buddy! The 16 cu ft Everchill RV Refrigerator w Freezer Drawers #EV87FR is a great option if you have room for it. I unfortunately wasn't able to find the specs on your EC18WIM model but if you let me know what size it is…

view full answer...

Answer 10

If I'm understanding you correctly, then it sounds like you're looking for the etrailer Enclosed Trailer Transition Plate #e32JR. This plate gets drilled into your trailer's door, has a 1,000 lb working load limit (WLL) capacity, and…

view full answer...

Answer 11

Advent Air Conditioners in my opinion are very comparable to the Coleman brand and hold up very well. I recommend the Advent Air RV Air Conditioner w/ Air Distribution Box and Start Capacitor Item #ACM135C for your 2003 Jayco. It is a complete AC…

view full answer...

Answer 12

You definitely can cut the SumoSprings Trailer Helper Springs #TSS-107-40 to fit your application if you don't have enough room. We have confirmed this with SuperSprings on multiple occasions. You might also want to make sure that you haven't…

view full answer...

Dimensions Of The Ventline Exterior Wall Vent for RV Range Hood

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching