Inno Roof Bike Racks Review - 2015 Honda Accord Video

The Rola roof rack you referenced is designed for 2012 through 2015 Honda CR-V with the flush factory side rails. You mentioned you have a naked roof and we have other roof rack options for that roof style but the Rola does not fit a naked roof. If…

I spoke with Rhino Rack about the Rhino-Rack Road Warrior Rooftop Bike Carrier part #RBC036 and they stated there is a tab on the backside of the skewer that will need to be depressed with the key inside the lock and it being in the unlocked…

The Rhino Rack Road Warrior part #RBC036 is a really great choice that fits the factory crossbars of your 2018 Honda Odyssey, is priced great, and comes with locks for the bikes and the rack. You might have to stagger the direction of the bikes as…

We have exactly what you need, as there is a fork-mount bike rack that can be used as either a channel-mounted rack or a clamp-on style rack. The rack you need is the Thule FastRide Roof Bike Rack #TH95JV. The FastRide comes with T-slot hardware that…

I spoke with my contact at Rhino Rack and the replacement part number you need is part #RBCA022 which is the replacement skewer for the Rhino Rack Road Warrior #RRRBC036.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…