Inno Ridge Rooftop Cargo Box Review Video

Yes, the Inno Ridge Rooftop Cargo Box - 8 cu ft - Gloss Black, part #INBRA220R-BK, will fit your 2022 Toyota 4Runner. This box will fit with no issues because of the u-bolts. I have included a video review link below.

You're right that the Inno Ridge Rooftop Cargo Box - 8 cu ft - Gloss Black #INBRA220R-BK is contoured to sit lower around past the crossbars. This is for a more aerodynamic shape to cause less drag. Because of the way this cargo box mounts and…

The interior height at 11-3/8" for Inno Ridge Rooftop Cargo Box - 8 cu ft - Gloss Black Item #INBRA220R-BK is the height at the tallest point which is nearer the back of the box than the front. It is hard to get overall measurements of a cargo…

The Rhino Rack SX Vortex roof rack kit that fits your 2016 Subaru Forester with raised factory rails consists of part numbers #RRVA126B-2 and #RRSX100. I attached a picture of this rack installed for you.

Crossbar spread is a key factor in determining the accessories and loads that the system can safely carry on a car. To properly measure, you will need to measure from the center of one bar to the center of the other. This is the correct way to…

The Inno Ridge Rooftop Cargo Box - 8 Cu ft. #INBRA220R-BK will fit all types of Yakima crossbars except for the Yakima HD Crossbars #Y01156. As far as access to the rear hatch, the Inno Ridge will allow you to access the rear hatch of your 2015…

The Inno Roof Deck Platform Rack for Crossbars - Aluminum - 39-1/2" x 43-1/4" - 165 lbs, part #INA510, will fit your factory roof rack without any issues. I have included a video review below.

I do have a roof rack that will fit your vehicle, unfortunately it will not include the Rhino-Rack legs you attached to your question. I checked with Rhino Rack today and I was told that this rack is not a fit for your vehicle. Instead, I recommend a…

Yes, you can use the Inno Stream Rooftop Cargo Box with the Memory Mount Clamps for Inno Rooftop Cargo Boxes part #INBRP9.

The Replacement Mounting Hardware Kit for Car Top Cargo Roof Cargo Boxes, part #CTC-18PARTS, includes u-bolts that measure 3-3/4-inches inside width and 2-1/2-inches depth measured at the center detent. These and other dimensions are shown on the…

Thank you for your order! The Rhino-Rack roof kit you ordered (parts listed below) for your 2022 Jeep Renegade will fit your vehicle with the raised rails - I confirmed this with Rhino-Rack so you'll be good to install it! 49" Vortex Aero…

The Yakima DeepSpace part #Y65RR that you referenced has a crossbar spread range that it fits of 32-46 inches and is overall 23 inches wide. Looking at your roof rack setup this would easily fit from a spread standpoint due to your bars being…