Fastway Flip Automatic Fold-Up Jack Foot Review Video

You'd only really find yourself in a situation to need one leveling system with your trailer. Just using the Andersen Rapid Jack #AM3620 would be all that you'd need. If you found yourself needing more leveling height you probably…

The Blaylock EZ Jack and Wheel Chock #EZ-JACK referenced in your question will work perfectly as a jack to change tires on your tandem axle leaf spring boat trailer. All you need to do is roll the good tire up onto the wedge and the flat tire will…

The Blaylock Wheel Chock part #EZ-JACK that you referernced should work just fine on a trailer with fenders like yours. I attached a picture that shows it being used on a trailer with fenders for you to check out plus a review video. The overall…

The Fastway Flip Automatic Fold-Up Jack Foot #FA88-00-4500 when folded in the stowed position will reduce ground clearance from the hole in the jack tube by approximately 3-inches. This is shown in the photo I prepared for you.

I attached a picture that has all of the dimensions you requested for the Titan coupler part #T4845000 that you referenced.

The Titan Zinc-Plated, Leverlock Coupler #T4845000 measures 4-1/8 inches tall, so it looks like it may be too tall for your set up. If so, the only other 5,000 lb coupler for a 2" hitch ball that may work is one that has half of the height, the…

The Master Lock Adjustable Trailer Coupler Lock #2847DAT is a great lock to use to lock the yoke style coupler you sent in a picture of. I attached a picture of it used to lock a coupler just like yours for you to check out as well.

The Titan Zinc-Plated, Leverlock Coupler #T4845000 that you referenced is designed to fit on a trailer tongue that measures 3 inches wide. If you measure the width of the insert portion of your surge coupler and it's 3 inches wide this will…

I went out to the warehouse and was able to measure the distance from the base plate to the pin hole on the Pro Series Detachable Footplate #PS1400700340. The distance is right at 3/4 inches so you should have no problem using it with your existing…

I have good news, our trailer jack that has a 2 inch outer diameter part #DL74MR would fit and work well. While it has a 1,000 lb weight capacity that does not mean 1,000 lb total trailer weight capacity. That capacity is the tongue weight capacity…

The Footplate for 2-1/4" Round Tube, A-Frame Jacks part #JF-101BK is designed to slide over an inner tube for an a-frame trailer jack with a 2" outer diameter. Therefore, if the outer diameter of the inner tube on your jack is 2" then…

The Phoenix Faucets 4" Dual Handle RV Tub/Shower Diverter Faucet w/ D-Spud #PF213321 has a flow rate of 2.5 gallons per minute which is also the same for the RV Shower Valve w/ Vacuum Breaker #277-000027. This is basically the standard RV flow…