Camco Water Heater Element Replacement Manufacturer Review Video

I added a photo which shows the location of the heating element of the Atwood Water Heater GC6AA-10E for you. It is item number 17 in the diagram. Atwood does recommend having a professional do the job if you are replacing it due to its location.

I was looking through the manual for the Suburban SW6DE water heaters and found that the Suburban replacement is similar but shorter than the Camco model #CAM02143. It looks like the original one used in that water heater was discontinued and…

The Camco Water Heater Element #CAM02143 is what you need for the SW6DEL water heater. According to our research this element will replace the heating element perfectly in your Suburban water heater. You can also use the Camco RV Water Heater Anode…

For your Suburban SW6DE, you will want the Camco Water Heater Element #CAM02143 and the anode rod #CAM11563. This water heater will use a combination of electric and gas to heat your water. The electric ignition and element will determine the…

We do indeed offer a replacement heating element for the Dometic WH-6GEA RV water heater which we sell as part #DMC74FR. You'll want to use part #DMC49FR which also includes the needed replacement gasket.

The proper replacement heating element for your Dometic GC6AA-10E is the Camco #CAM02103. Because the element is accessed from the rear of the unit, Dometic recommends having a qualified service center complete the installation. A specific socket…

The heating element on your Atwood model GC10A-4E water heater (our part #AT94022) should be on the backside of the unit, towards the bottom of the tank. It will actually be behind the gas line assembly, which will need to be loosened and moved out…

The Camco RV Water Heater Anode Rod part #CAM11563 is what you need for the suburban SW6D water heater.

The correct anode rod for your Suburban Water Heater SW6DELC is the Camco RV Water Heater Anode Rod #CAM11563 which has a 3/4" diameter and is 9-1/2" long. Attached is a review video of this anode rod as well as a video on how to clean and…

We have the replacement valve for Dometic Pedal RV Toilets with the part #DOM93FR which sounds like what you are looking for. Since you said you have a 310 series we know this is a fit too as that is one of the listed toilets it fits.

I suppose if the tank hasn't been damaged at all that you could just replace the heating element, but that's assuming that there isn't something else going on that caused the unit to catch fire. It looks like the original one used in that…

The removal of the hot water heater element can be difficult. You can use a crescent wrench on the hex head of the element to unscrew it but Camco has a special wrench #CAM09883 to help with removing that element. This allows you to use a screwdriver…